Re: [Madwifi-devel] radar detection sensitivity
Status: Beta
Brought to you by:
otaku
From: Benoit P. <ben...@fr...> - 2007-05-15 20:46:51
|
Michael Taylor a écrit : >> Which chipset are you using to do those testing? I'm using CM9 with >> AR5212 and I think I managed to set bit 1 in register 0x9954 >> (AR5K_PHY_RADAR) in madwifi-ng (ie using the binary HAL). >> >> > I am using CM9 also, but I was unable to configure the binary HAL to get > that bit enabled. Can you tell me what changes you made to get this to > work? What country code? Did you enable HAL_CAP_INTMIT? I'd be *very* > interested to know how you go it to work. > > Thanks in advance, > > Mike > Hi Mike, Maybe i misunderstood what you said in fact. I was able to set the bit 1 with madwifi-ng/trunk version, ie the version using the binary HAL. However, in order to enable that bit, I did it directly with OS_REG_READ / OS_REG_WRITE (patch attached). This bit is checked in ath_intr and apparently (at least in my test), it was not reset by the HAL. Tell me if that works for you too. Are you able to get radar with that code? Best regards, Benoit |