[Madwifi-users] 802.1x

[Jason R. <ja...@ro...>]

Afternoon,
I would like to confirm 802.1x support in the latest release, with I have
not ben able to get working.  Here is what I have done so far:

To setup the radius server the configured the 802.1x options:
 sysctl -w net.8021x.radius.clientaddr=3D10.3.0.177
 sysctl -w net.8021x.radius.serveraddr=3D10.3.0.40
 echo -n radius123 > /proc/sys/net/8021x/radius/secret

I have tested the radius server with radtest and it work from the client to
server.  Then, enable 802.1x operation in AP mode with something like:
=20
 iwconfig ath0 mode master essid foobar
 iwpriv ath0 authmode 3                  # 802.1x
 iwconfig ath0 key aabbccddee0011223344aabbcc556677 [2]
 ifconfig ath0 10.1.1.1

Do I have to load any of the new wlan modules for this to work?  Am I
missing something.  I try to connect to the AP from a laptop and I get
nothing back. I don=B9t even see the AP try to connect to the radius server.
Do I need the WPA supplemental to get this to work?  Does this have to be
done in bridged mode?

Thanks,
Jason