the subject seems easy but is not. I checked the Web site and the
mailing list, but nothing.
Here is my situation:
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 5.9 phy 4.3 radio 3.6
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0x46000000, irq=177
Compiled and installed madwifi 0.9.2.1 with kernel 126.96.36.199. iwlist ath0
scan is working perfect. I can use kismet and airodump (dumped data are
not corrupted) but i cant connect to any AP. I'm using a Senao and a
Broadcom under linux with my AP and both are working.
# ifconfig ath0 up
# iwlist ath0 scan
Cell 03 - Address: AP_MAC
Frequency:2.412 GHz (Channel 1)
Quality=22/94 Signal level=-73 dBm Noise level=-95 dBm
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s
48 Mb/s; 54 Mb/s
# iwconfig ath0 essid testnet
ath0 IEEE 802.11a ESSID:"testnet"
Mode:Managed Frequency:5.3 GHz Access Point: Not-Associated
Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=0/3
Retry:off RTS thr:off Fragment thr:off
Link Quality=0/94 Signal level=-95 dBm Noise level=-95 dBm
# iwconfig ath0 ap AP_MAC
same as before.
#iwpiv ath0 mode 2
same as before.
This AP has no MAC filter/WEP/WPA it's just an open network and i cant
connect in any way. I tried 3 more AP that i have access and nothing. I
thought was a card problem, but under windows i can connect without any
Any1 got the same problem?
Get latest updates about Open Source Projects, Conferences and News.