From: George Sifnios <gs@wl...> - 2004-08-09 20:20:41
Alo from Greece,
I have two basic questions about the driver.
I am trying to "play" outdoor with Atheros-A chipsets and i made a
wireless link of around 3 and a half kilometres. I attached two 17db
panels on the chipsets (one for each point of the link) but i can not
reach the full bandwidth that should get (56Mbit == 2.5 to 3MB transfer
rate).I am sure about line of sight and panels direction as i had some
other chipsets before which "played OK" .The scenario is that although
AP && Station are set to Auto Rate , Station falls to 6Mbit/sec rate and
i finally get a 140kbyte/sec transfer rate(as if the two points plays to
I think maybe the diversity of antennas is the problem in so long
distances or may the ACK-receive sychonization for such distances.I
would like to know if any of you guys have an idea so that i will try
fixing the problem if it is possible.
(2.) Is there any chance to make txpower functional ??
Looking forward to get some feedback...
Thanks a lot....