[Mactel-linux-devel] LiveCD on Macbook Pro

[Mark & T. J. <joh...@gm...>]

I didn't see anything on the Wiki if anyone else has done this yet.
Just wanted to confirm
your LIveCD boots on a a MacBook (one day old :-) ).

I didn't poke around very much, just burned the CD and booted up straight i=
nto a
shell. Verified the networks was up and scp'd dmesg output to one of my oth=
er
machines..

I'm going to play with it some more later this week. If you want me to
try anything
out, give me a yell...

Thanks!




MRJ


Linux version 2.6.16-rc5 (root@t43) (gcc version 4.0.3 20060304
(prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 SMP Mon Mar 6 08:01:53 UTC
2006
EFI: EFI v0.101 by Apple
 ACPI=3D0x7fefd000 <6> ACPI 2.0=3D0x7fefd014 <6> SMBIOS=3D0x7fec9000
0MB HIGHMEM available.
2046MB LOWMEM available.
On node 0 totalpages: 523976
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 519880 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:0
DMI 2.4 present.
ACPI: RSDP (v002 APPLE                                 ) @ 0x7fefd014
ACPI: XSDT (v001 APPLE   Apple00 0x00000044      0x01000013) @ 0x7fefd120
ACPI: FADT (v003 APPLE   Apple00 0x00000044 Loki 0x0000005f) @ 0x7fefb000
ACPI: HPET (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fefa000
ACPI: MADT (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fef9000
ACPI: MCFG (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fef8000
ACPI: ASF! (v032 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fef7000
ACPI: SBST (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fef6000
ACPI: ECDT (v001 APPLE   Apple00 0x00000001 Loki 0x0000005f) @ 0x7fef5000
ACPI: SSDT (v001 APPLE   SataPri 0x00001000 INTL 0x20050309) @ 0x7fec5000
ACPI: SSDT (v001 APPLE   SataSec 0x00001000 INTL 0x20050309) @ 0x7fec4000
ACPI: SSDT (v001 APPLE     CpuPm 0x00003000 INTL 0x20050309) @ 0x7feef000
ACPI: DSDT (v001 APPLE  MacBookP 0x00010001 INTL 0x20050309) @ 0x00000000
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1 already used, trying 2
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10100000 (gap: 10000000:00400000)
Built 1 zonelists
Kernel command line: BOOT_IMAGE=3Ddev002:\EFI\elilo\vmlinuz=20
video=3Dimacfb:i17 acpi=3Dforce libata.atapi_enabled=3D1 init=3D/linuxrc
root=3D/dev/ram0 pcboot=3Dcdrom
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
Memory: 2069352k/2095904k available (2629k kernel code, 23348k
reserved, 756k data, 248k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok=
.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 1997.376 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 4000.47 BogoMIPS (lpj=3D80=
00952)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140
0000c1a9 00000000 00000000
Checking 'hlt' instruction... OK.
CPU0: Intel Genuine Intel(R) CPU            1500  @ 2.00GHz stepping 08
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3994.82 BogoMIPS (lpj=3D79=
89656)
CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000
0000c1a9 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000140
0000c1a9 00000000 00000000
CPU1: Intel Genuine Intel(R) CPU            1500  @ 2.00GHz stepping 08
Total of 2 processors activated (7995.30 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=3D0x31 apic1=3D0 pin1=3D2 apic2=3D-1 pin2=3D-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=3D8000
checking if image is initramfs...it isn't (no cpio magic); looks like an in=
itrd
Freeing initrd memory: 1095k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled=
.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=3Drouteirq".  If it helps, post a r=
eport
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: 98300000-983fffff
  PREFETCH window: 80000000-8fffffff
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-2fff
  MEM window: 98200000-982fffff
  PREFETCH window: 7ff00000-7fffffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: 98100000-981fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.2
  IO window: 1000-1fff
  MEM window: 94100000-980fffff
  PREFETCH window: 90000000-93ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: 94000000-940fffff
  PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Enabling device 0000:00:1c.2 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(2254587648.744:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
imacfb: framebuffer at 0x80010000, mapped to 0xf8900000, using 10350k,
total 16384k
imacfb: mode is 1440x900x32, linelength=3D5888, pages=3D1
imacfb: scrolling: redraw
imacfb: Truecolor: size=3D8:8:8:8, shift=3D24:16:8:0
Console: switching to colour frame buffer device 180x56
fb0: IMAC VGA frame buffer device
Real Time Clock Driver v1.12ac
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v0.15 addr 0x98200000 irq 16 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:16:cb:8d:3f:9d
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x4 impl SATA m=
ode
ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xF881A100 ctl 0x0 bmdma 0x0 irq 19
ata2: SATA max UDMA/133 cmd 0xF881A180 ctl 0x0 bmdma 0x0 irq 19
ata3: SATA max UDMA/133 cmd 0xF881A200 ctl 0x0 bmdma 0x0 irq 19
ata4: SATA max UDMA/133 cmd 0xF881A280 ctl 0x0 bmdma 0x0 irq 19
ata1: SATA link down (SStatus 0)
scsi0 : ahci
ata2: SATA link down (SStatus 0)
scsi1 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6063 85:7469 86:3d09 87:6063 88:=
203f
ata3: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48
ata3: dev 0 configured for UDMA/100
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
  Vendor: ATA       Model: TOSHIBA MK1032GS  Rev: AS02
  Type:   Direct-Access                      ANSI SCSI revision: 05
ata_piix 0000:00:1f.1: version 1.05
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.1 to 64
ata5: PATA max UDMA/100 cmd 0x40E8 ctl 0x40FE bmdma 0x40C0 irq 18
ata6: PATA max UDMA/100 cmd 0x40E0 ctl 0x40FA bmdma 0x40C8 irq 18
ata5: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:=
101f
ata5: dev 0 ATAPI, max UDMA/66
ata5: dev 0 configured for UDMA/66
scsi4 : ata_piix
ATA: abnormal status 0x7F on port 0x40E7
ata6: disabling port
scsi5 : ata_piix
  Vendor: MATSHITA  Model: DVD-R   UJ-857    Rev: HAC1
  Type:   CD-ROM                             ANSI SCSI revision: 05
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 10
SCSI device sda: drive cache: write back w/ FUA
SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 10
SCSI device sda: drive cache: write back w/ FUA
 sda: sda1 sda2
sd 2:0:0:0: Attached scsi disk sda
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 2:0:0:0: Attached scsi generic sg0 type 0
sr 4:0:0:0: Attached scsi generic sg1 type 5
SCSI Media Changer driver v0.25
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98405400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000040a0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004040
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-4: new high speed USB device using ehci_hcd and address 3
Initializing USB Mass Storage driver...
usb 1-4: configuration #1 chosen from 1 choice
usb 2-2: new full speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/in=
put0
input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard
/ Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/in=
put1
input: USB HID v1.11 Mouse [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/in=
put2
input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard /
Trackpad] on usb-0000:00:1d.0-2
hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on
usb-0000:00:1d.2-2
input: HID 05ac:1000 as /class/input/input3
input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
input: HID 05ac:1000 as /class/input/input4
input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI Shortcut mode
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 248k freed
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
Registering unionfs 1.1.3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random hardware driver 1.0.0 loaded
sky2 eth0: enabling interface
Linux agpgart interface v0.101 (c) Dave Jones
ieee1394: Initialized config rom entry `ip1394'
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=3D[19]=20
MMIO=3D[94000000-940007ff]  Max Packet=3D[2048]  IR/IT contexts=3D[8/8]
PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016cbfffe522e30]
md: md driver 0.90.3 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-...@re...