Menu
▾
▴
[Mactel-linux-users] updated imac(status report)
|
From: Justin P. M. <jus...@gm...> - 2009-04-18 09:03:20
|
After spending some time the(new updated imac) imac
is more than capable of working on line:
(below is dmesg)
[ 0.000000] Linux version 2.6.29 (name@name) (gcc version 4.5.0
20090327 (experimental) (GCC) ) #13 SMP Thu Apr 16 06:18:06 PDT 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000be830000 (usable)
[ 0.000000] BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000bea50000 - 00000000bfec5000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000bfec5000 - 00000000bfec7000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000bfec7000 - 00000000bfec8000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfecb000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000
(reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000d3400000 - 00000000d3401000
(reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000
(reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbe830 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT BFEEE1C0, 0074 (r1 APPLE Apple00 8D
1000013)
[ 0.000000] ACPI: FACP BFEEC000, 00F4 (r3 APPLE Apple00 8D
Loki 5F)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match
PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT BFEE0000, 5566 (r1 APPLE iMac 90001
INTL 20061109)
[ 0.000000] ACPI: FACS BFECD000, 0040
[ 0.000000] ACPI: HPET BFEEB000, 0038 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: APIC BFEEA000, 0068 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: MCFG BFEE9000, 003C (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: ASF! BFEE8000, 00A5 (r32 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: SBST BFEE7000, 0030 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: ECDT BFEE6000, 0053 (r1 APPLE Apple00 1
Loki 5F)
[ 0.000000] ACPI: SSDT BFEC7000, 04DC (r1 APPLE CpuPm 3000
INTL 20061109)
[ 0.000000] ACPI: SSDT BFEDF000, 00A5 (r1 SataRe SataPri 1000
INTL 20061109)
[ 0.000000] ACPI: SSDT BFECC000, 009F (r1 SataRe SataSec 1000
INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2160MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 -
00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000690550] TEXT DATA BSS ==>
[0000100000 - 0000690550]
[ 0.000000] #4 [0000691000 - 0000694000] INIT_PG_TABLE ==>
[0000691000 - 0000694000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==>
[0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==>
[0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000be830
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000be830
[ 0.000000] On node 0 totalpages: 780239
[ 0.000000] free_area_init_node: node 0, pgdat c0563ac0, node_mem_map
c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4321 pages used for memmap
[ 0.000000] HighMem zone: 548689 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d3401000:1cbff000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 774142
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29
root=/dev/sda3 debug vga=893 audit=1 selinux=1 enforcing=1
[ 0.000000] audit: enabled (after initialization)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3051.511 MHz processor.
[ 0.010000] spurious 8259A interrupt: IRQ7.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.010000] Memory: 3088992k/3121344k available (2964k kernel code,
31156k reserved, 1621k data, 408k init, 2212040k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.010000] .init : 0xc0582000 - 0xc05e8000 ( 408 kB)
[ 0.010000] .data : 0xc03e5279 - 0xc057a784 (1621 kB)
[ 0.010000] .text : 0xc0100000 - 0xc03e5279 (2964 kB)
[ 0.010000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.010000] HPET: 4 timers in total, 0 timers will be used for
per-cpu timer
[ 0.010000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 6103.02 BogoMIPS (lpj=30515110)
[ 0.010000] Security Framework initialized
[ 0.010000] SELinux: Initializing.
[ 0.010000] SELinux: Starting in enforcing mode
[ 0.010000] Mount-cache hash table entries: 512
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 0
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#0.
[ 0.010000] using mwait in idle threads.
[ 0.010000] Checking 'hlt' instruction... OK.
[ 0.041409] ACPI: Core revision 20081204
[ 0.075043] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.175072] CPU0: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz
stepping 0a
[ 0.180000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 6102.76
BogoMIPS (lpj=30513810)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#1.
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new
0x7010600070106
[ 0.332459] CPU1: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz
stepping 0a
[ 0.332508] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.340030] Brought up 2 CPUs
[ 0.340035] Total of 2 processors activated (12205.78 BogoMIPS).
[ 0.340118] CPU0 attaching sched-domain:
[ 0.340124] domain 0: span 0-1 level MC
[ 0.340129] groups: 0 1
[ 0.340136] CPU1 attaching sched-domain:
[ 0.340141] domain 0: span 0-1 level MC
[ 0.340145] groups: 1 0
[ 0.340247] net_namespace: 800 bytes
[ 0.340565] Booting paravirtualized kernel on bare hardware
[ 0.340784] NET: Registered protocol family 16
[ 0.340784] EISA bus registered
[ 0.340784] ACPI: bus type pci registered
[ 0.340784] PCI: Using configuration type 1 for base access
[ 0.350125] bio: create slab <bio-0> at 0
[ 0.362144] ACPI: EC: EC description table is found, configuring boot
EC
[ 0.362593] ACPI: EC: non-query interrupt received, switching to
interrupt mode
[ 0.372451] ACPI: BIOS _OSI(Linux) query ignored
[ 0.374970] ACPI: Interpreter enabled
[ 0.374979] ACPI: (supports S0 S3 S4 S5)
[ 0.375003] ACPI: Using IOAPIC for interrupt routing
[ 0.417877] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data =
0x62
[ 0.417877] ACPI: EC: driver started in interrupt mode
[ 0.417877] ACPI: No dock devices found.
[ 0.420350] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.420787] pci 0000:00:03.0: reg 10 io port: [0x2000-0x20ff]
[ 0.420909] pci 0000:00:03.2: reg 10 io port: [0x2180-0x21bf]
[ 0.420929] pci 0000:00:03.2: reg 20 io port: [0x2140-0x217f]
[ 0.420937] pci 0000:00:03.2: reg 24 io port: [0x2100-0x213f]
[ 0.420966] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.420975] pci 0000:00:03.2: PME# disabled
[ 0.421161] pci 0000:00:03.5: reg 10 32bit mmio:
[0xd3400000-0xd347ffff]
[ 0.421265] pci 0000:00:04.0: reg 10 32bit mmio:
[0xd3488000-0xd3488fff]
[ 0.421305] pci 0000:00:04.0: supports D1 D2
[ 0.421309] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.421316] pci 0000:00:04.0: PME# disabled
[ 0.421353] pci 0000:00:04.1: reg 10 32bit mmio:
[0xd3489200-0xd34892ff]
[ 0.421400] pci 0000:00:04.1: supports D1 D2
[ 0.421405] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.421412] pci 0000:00:04.1: PME# disabled
[ 0.421453] pci 0000:00:06.0: reg 10 32bit mmio:
[0xd3487000-0xd3487fff]
[ 0.421493] pci 0000:00:06.0: supports D1 D2
[ 0.421497] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.421504] pci 0000:00:06.0: PME# disabled
[ 0.421541] pci 0000:00:06.1: reg 10 32bit mmio:
[0xd3489100-0xd34891ff]
[ 0.421588] pci 0000:00:06.1: supports D1 D2
[ 0.421592] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.421600] pci 0000:00:06.1: PME# disabled
[ 0.421641] pci 0000:00:08.0: reg 10 32bit mmio:
[0xd3480000-0xd3483fff]
[ 0.421681] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.421688] pci 0000:00:08.0: PME# disabled
[ 0.421772] pci 0000:00:0a.0: reg 10 32bit mmio:
[0xd3486000-0xd3486fff]
[ 0.421781] pci 0000:00:0a.0: reg 14 io port: [0x21e0-0x21e7]
[ 0.421789] pci 0000:00:0a.0: reg 18 32bit mmio:
[0xd3489000-0xd34890ff]
[ 0.421798] pci 0000:00:0a.0: reg 1c 32bit mmio:
[0xd3489300-0xd348930f]
[ 0.421830] pci 0000:00:0a.0: supports D1 D2
[ 0.421834] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.421843] pci 0000:00:0a.0: PME# disabled
[ 0.421881] pci 0000:00:0b.0: reg 10 io port: [0x21d8-0x21df]
[ 0.421889] pci 0000:00:0b.0: reg 14 io port: [0x21ec-0x21ef]
[ 0.421897] pci 0000:00:0b.0: reg 18 io port: [0x21d0-0x21d7]
[ 0.421905] pci 0000:00:0b.0: reg 1c io port: [0x21e8-0x21eb]
[ 0.421914] pci 0000:00:0b.0: reg 20 io port: [0x21c0-0x21cf]
[ 0.421922] pci 0000:00:0b.0: reg 24 32bit mmio:
[0xd3484000-0xd3485fff]
[ 0.422151] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.422162] pci 0000:00:0c.0: PME# disabled
[ 0.422403] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.422415] pci 0000:00:15.0: PME# disabled
[ 0.422647] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.422659] pci 0000:00:16.0: PME# disabled
[ 0.422751] pci 0000:00:09.0: transparent bridge
[ 0.422759] pci 0000:00:09.0: bridge 32bit mmio:
[0xd3300000-0xd33fffff]
[ 0.422816] pci 0000:02:00.0: reg 10 32bit mmio:
[0xd2000000-0xd2ffffff]
[ 0.422831] pci 0000:02:00.0: reg 14 64bit mmio:
[0xc0000000-0xcfffffff]
[ 0.422845] pci 0000:02:00.0: reg 1c 64bit mmio:
[0xd0000000-0xd1ffffff]
[ 0.422856] pci 0000:02:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.422865] pci 0000:02:00.0: reg 30 32bit mmio:
[0xd3000000-0xd307ffff]
[ 0.422961] pci 0000:00:0c.0: bridge io port: [0x1000-0x1fff]
[ 0.422973] pci 0000:00:0c.0: bridge 32bit mmio:
[0xd0000000-0xd30fffff]
[ 0.422992] pci 0000:00:0c.0: bridge 64bit mmio pref:
[0xc0000000-0xcfffffff]
[ 0.423216] pci 0000:03:00.0: reg 10 64bit mmio:
[0xd3200000-0xd3203fff]
[ 0.423287] pci 0000:03:00.0: supports D1 D2
[ 0.423291] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.423299] pci 0000:03:00.0: PME# disabled
[ 0.423375] pci 0000:00:15.0: bridge 32bit mmio:
[0xd3200000-0xd32fffff]
[ 0.423470] pci 0000:04:00.0: reg 10 64bit mmio:
[0xd3100000-0xd3100fff]
[ 0.423537] pci 0000:04:00.0: supports D1 D2
[ 0.423541] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.423550] pci 0000:04:00.0: PME# disabled
[ 0.423623] pci 0000:00:16.0: bridge 32bit mmio:
[0xd3100000-0xd31fffff]
[ 0.423685] pci_bus 0000:00: on NUMA node 0
[ 0.423703] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.647538] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15)
*0, disabled.
[ 0.650746] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15)
*0, disabled.
[ 0.651744] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15)
*0, disabled.
[ 0.652730] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15)
*0, disabled.
[ 0.653719] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21
22 23) *11
[ 0.654704] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.655690] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.656674] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.657656] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.658638] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.659646] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.660666] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.661662] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.662656] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.663651] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.664645] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.665638] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21
22 23) *10
[ 0.666628] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.667620] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.668611] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.669599] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21
22 23) *7
[ 0.670608] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.671595] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.672581] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.673564] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.674555] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.675538] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.676533] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.677512] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.678492] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.679483] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.680487] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.681465] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21
22 23) *15
[ 0.682439] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21
22 23) *11
[ 0.683409] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21
22 23) *10
[ 0.684381] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21
22 23) *14
[ 0.685348] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21
22 23) *15
[ 0.686329] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.687307] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.688285] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21
22 23) *11
[ 0.689263] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21
22 23) *0, disabled.
[ 0.690261] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21
22 23) *7
[ 0.691238] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21
22 23) *5
[ 0.692211] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21
22 23) *14
[ 0.692417] SCSI subsystem initialized
[ 0.692417] libata version 3.00 loaded.
[ 0.692417] usbcore: registered new interface driver usbfs
[ 0.692417] usbcore: registered new interface driver hub
[ 0.692417] usbcore: registered new device driver usb
[ 0.692417] PCI: Using ACPI for IRQ routing
[ 0.770100] cfg80211: Using static regulatory domain info
[ 0.770100] cfg80211: Regulatory domain: US
[ 0.770100] (start_freq - end_freq @ bandwidth), (max_antenna_gain,
max_eirp)
[ 0.770100] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700
mBm)
[ 0.770100] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 0.770100] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 0.770100] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 0.770101] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300
mBm)
[ 0.770107] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000
mBm)
[ 0.770113] cfg80211: Calling CRDA for country: US
[ 0.770147] NetLabel: Initializing
[ 0.770147] NetLabel: domain hash size = 128
[ 0.770147] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.770174] NetLabel: unlabeled traffic allowed by default
[ 0.770189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.770199] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.790006] Switched to high resolution mode on CPU 0
[ 0.792544] Switched to high resolution mode on CPU 1
[ 0.830037] pnp: PnP ACPI init
[ 0.830054] ACPI: bus type pnp registered
[ 0.841915] pnp: PnP ACPI: found 8 devices
[ 0.841921] ACPI: ACPI bus type pnp unregistered
[ 0.841940] system 00:01: iomem range 0xf0000000-0xf3ffffff has been
reserved
[ 0.841955] system 00:04: iomem range 0xfed00000-0xfed003ff has been
reserved
[ 0.841969] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.841976] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.841983] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.841989] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.841996] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.842003] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.842010] system 00:06: ioport range 0x2140-0x217f has been
reserved
[ 0.842017] system 00:06: ioport range 0x2100-0x213f has been
reserved
[ 0.842025] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.842032] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.878264] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.878270] pci 0000:00:09.0: IO window: disabled
[ 0.878278] pci 0000:00:09.0: MEM window: 0xd3300000-0xd33fffff
[ 0.878285] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.878293] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.878302] pci 0000:00:0c.0: IO window: 0x1000-0x1fff
[ 0.878315] pci 0000:00:0c.0: MEM window: 0xd0000000-0xd30fffff
[ 0.878327] pci 0000:00:0c.0: PREFETCH window:
0x000000c0000000-0x000000cfffffff
[ 0.878345] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.878350] pci 0000:00:15.0: IO window: disabled
[ 0.878363] pci 0000:00:15.0: MEM window: 0xd3200000-0xd32fffff
[ 0.878374] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.878390] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[ 0.878395] pci 0000:00:16.0: IO window: disabled
[ 0.878409] pci 0000:00:16.0: MEM window: 0xd3100000-0xd31fffff
[ 0.878420] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.878438] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.878447] pci 0000:00:09.0: setting latency timer to 64
[ 0.880052] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 0.880063] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23
(level, low) -> IRQ 23
[ 0.880077] pci 0000:00:0c.0: setting latency timer to 64
[ 0.881641] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 0.881650] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22
(level, low) -> IRQ 22
[ 0.881664] pci 0000:00:15.0: setting latency timer to 64
[ 0.883225] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.883235] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21
(level, low) -> IRQ 21
[ 0.883248] pci 0000:00:16.0: setting latency timer to 64
[ 0.883257] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.883262] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.883268] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.883273] pci_bus 0000:01: resource 1 mem: [0xd3300000-0xd33fffff]
[ 0.883279] pci_bus 0000:01: resource 2 mem: [0x0-0x0]
[ 0.883283] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.883288] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.883294] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.883299] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd30fffff]
[ 0.883305] pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.883310] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.883315] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.883320] pci_bus 0000:03: resource 1 mem: [0xd3200000-0xd32fffff]
[ 0.883325] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.883330] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.883334] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.883339] pci_bus 0000:04: resource 1 mem: [0xd3100000-0xd31fffff]
[ 0.883344] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.883349] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.883391] NET: Registered protocol family 2
[ 1.000119] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 1.000533] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.001038] TCP bind hash table entries: 65536 (order: 8, 1310720
bytes)
[ 1.001637] TCP: Hash tables configured (established 131072 bind
65536)
[ 1.001643] TCP reno registered
[ 1.030162] NET: Registered protocol family 1
[ 1.033888] Microcode Update Driver: v2.00
<ti...@ai...>, Peter Oruba
[ 1.035686] Initializing RT-Tester: OK
[ 1.035835] audit: initializing netlink socket (enabled)
[ 1.035892] type=2000 audit(1240003312.030:1): initialized
[ 1.047449] highmem bounce pool size: 64 pages
[ 1.047460] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.069311] fuse init (API version 7.11)
[ 1.070107] msgmni has been set to 1714
[ 1.070421] SELinux: Registering netfilter hooks
[ 1.071355] alg: No test for stdrng (krng)
[ 1.071376] io scheduler noop registered
[ 1.071798] io scheduler cfq registered (default)
[ 1.092735] pci 0000:02:00.0: Boot video device
[ 1.095007] vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000,
using 14336k, total 14336k
[ 1.095016] vesafb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.095021] vesafb: protected mode interface info at c000:bd10
[ 1.095027] vesafb: pmi: set display start = c00cbd73, set palette =
c00cbdce
[ 1.095032] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7
3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.095057] vesafb: scrolling: redraw
[ 1.095062] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.191842] Console: switching to colour frame buffer device 240x75
[ 1.279684] fb0: VESA VGA frame buffer device
[ 1.298158] loop: module loaded
[ 1.298366] Linux video capture interface: v2.00
[ 1.298972] input: Macintosh mouse button emulation
as /devices/virtual/input/input0
[ 1.299858] Driver 'sd' needs updating - please use bus_type methods
[ 1.300379] Driver 'sr' needs updating - please use bus_type methods
[ 1.301084] ahci 0000:00:0b.0: version 3.0
[ 1.302883] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 1.303249] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20
(level, low) -> IRQ 20
[ 1.303794] ahci 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 1.304166] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps
0x3 impl IDE mode
[ 1.304665] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio
slum part
[ 1.305117] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.305663] scsi0 : ahci
[ 1.306601] scsi1 : ahci
[ 1.307111] scsi2 : ahci
[ 1.307635] scsi3 : ahci
[ 1.308155] scsi4 : ahci
[ 1.308656] scsi5 : ahci
[ 1.309803] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 24
[ 1.310313] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection
status changed irq 24
[ 1.310822] ata3: DUMMY
[ 1.310976] ata4: DUMMY
[ 1.311129] ata5: DUMMY
[ 1.311282] ata6: DUMMY
[ 2.240010] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.241083] ata1.00: ATA-8: WDC WD1001FALS-40K1B0, 07.00K07, max
UDMA/133
[ 2.241506] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32)
[ 2.243634] ata1.00: configured for UDMA/133
[ 2.260191] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-4
07.0 PQ: 0 ANSI: 5
[ 2.261245] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors:
(1.00 TB/931 GiB)
[ 2.261763] sd 0:0:0:0: [sda] Write Protect is off
[ 2.262063] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.262433] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.263125] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors:
(1.00 TB/931 GiB)
[ 2.263642] sd 0:0:0:0: [sda] Write Protect is off
[ 2.263943] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.264311] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.264877] sda: sda1 sda2 sda3 sda4
[ 2.314675] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.315281] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.240010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.263484] ata2.00: ATAPI: OPTIARC DVD RW AD-5670S, 2AHC, max
UDMA/100, ATAPI AN
[ 3.286807] ata2.00: configured for UDMA/100
[ 3.325681] scsi 1:0:0:0: CD-ROM OPTIARC DVD RW AD-5670S
2AHC PQ: 0 ANSI: 5
[ 3.365866] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
caddy
[ 3.383934] Uniform CD-ROM driver Revision: 3.20
[ 3.402295] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.420531] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.438787] usbcore: registered new interface driver usblcd
[ 3.456706] usbcore: registered new interface driver usbled
[ 3.474884] PNP: No PS/2 controller found. Probing ports directly.
[ 3.493550] i8042.c: No controller found.
[ 3.550301] mice: PS/2 mouse device common for all mice
[ 3.569566] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-...@re...
[ 3.587960] EDAC MC: Ver: 2.1.0 Apr 14 2009
[ 3.607041] cpuidle: using governor ladder
[ 3.625218] cpuidle: using governor menu
[ 3.645980] usbcore: registered new interface driver hiddev
[ 3.663965] usbcore: registered new interface driver usbhid
[ 3.681603] usbhid: v2.6:USB HID core driver
[ 3.699277] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 3.716963] ALSA device list:
[ 3.734391] No soundcards found.
[ 3.752015] oprofile: using NMI interrupt.
[ 3.769731] IPVS: Registered protocols (TCP, AH, ESP)
[ 3.787345] IPVS: Connection hash table configured (size=4096,
memory=32Kbytes)
[ 3.804920] IPVS: ipvs loaded.
[ 3.822819] Initializing XFRM netlink socket
[ 3.840342] NET: Registered protocol family 17
[ 3.857688] NET: Registered protocol family 15
[ 3.874687] lib80211: common routines for IEEE802.11 drivers
[ 3.891958] lib80211_crypt: registered algorithm 'NULL'
[ 3.909150] lib80211_crypt: registered algorithm 'WEP'
[ 3.909152] lib80211_crypt: registered algorithm 'CCMP'
[ 3.909155] lib80211_crypt: registered algorithm 'TKIP'
[ 3.909167] Using IPI No-Shortcut mode
[ 4.033115] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.049540] EXT3-fs: write access will be enabled during recovery.
[ 4.744142] kjournald starting. Commit interval 5 seconds
[ 4.744156] EXT3-fs: recovery complete.
[ 4.744687] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.744733] VFS: Mounted root (ext3 filesystem) readonly on device
8:3.
[ 4.744964] Freeing unused kernel memory: 408k freed
[ 5.252132] SELinux: 8192 avtab hash slots, 145328 rules.
[ 5.378950] SELinux: 8192 avtab hash slots, 145328 rules.
[ 5.588192] SELinux: 7 users, 10 roles, 2688 types, 95 bools, 1
sens, 256 cats
[ 5.605988] SELinux: 74 classes, 145328 rules
[ 5.631604] SELinux: Completing initialization.
[ 5.649247] SELinux: Setting up existing superblocks.
[ 5.699417] SELinux: initialized (dev sda3, type ext3), uses xattr
[ 5.717762] SELinux: initialized (dev selinuxfs, type selinuxfs),
uses genfs_contexts
[ 5.736041] SELinux: initialized (dev mqueue, type mqueue), uses
transition SIDs
[ 5.754223] SELinux: initialized (dev hugetlbfs, type hugetlbfs),
uses genfs_contexts
[ 5.772411] SELinux: initialized (dev devpts, type devpts), uses
transition SIDs
[ 5.790564] SELinux: initialized (dev inotifyfs, type inotifyfs),
uses genfs_contexts
[ 5.808649] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 5.826610] SELinux: initialized (dev anon_inodefs, type
anon_inodefs), uses genfs_contexts
[ 5.844650] SELinux: initialized (dev pipefs, type pipefs), uses task
SIDs
[ 5.862761] SELinux: initialized (dev debugfs, type debugfs), uses
genfs_contexts
[ 5.880851] SELinux: initialized (dev sockfs, type sockfs), uses task
SIDs
[ 5.898758] SELinux: initialized (dev proc, type proc), uses
genfs_contexts
[ 5.916601] SELinux: initialized (dev bdev, type bdev), uses
genfs_contexts
[ 5.934382] SELinux: initialized (dev rootfs, type rootfs), uses
genfs_contexts
[ 5.952077] SELinux: initialized (dev sysfs, type sysfs), uses
genfs_contexts
[ 6.067983] type=1403 audit(1240003317.060:2): policy loaded
auid=4294967295 ses=4294967295
[ 6.913287] applesmc: Apple iMac detected:
[ 6.931063] applesmc: - Model without accelerometer
[ 6.949776] applesmc: - Model without light sensors and backlight
[ 6.968358] applesmc: - Model with 9 temperature sensors
[ 6.987081] applesmc: device successfully initialized.
[ 7.006794] applesmc: 3 fans found.
[ 7.025409] applesmc: driver successfully loaded.
[ 7.052676] ACPI: SSDT BFECAA98, 02FE (r1 APPLE Cpu0Ist 3000
INTL 20061109)
[ 7.073123] ACPI: SSDT BFEC8C18, 028F (r1 APPLE Cpu0Cst 3001
INTL 20061109)
[ 7.094541] Monitor-Mwait will be used to enter C-1 state
[ 7.094550] Monitor-Mwait will be used to enter C-2 state
[ 7.094558] Monitor-Mwait will be used to enter C-3 state
[ 7.095236] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 7.115333] processor ACPI_CPU:00: registered as cooling_device0
[ 7.135290] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 7.157059] ACPI: SSDT BFEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000
INTL 20061109)
[ 7.178216] ACPI: SSDT BFEC8F18, 0085 (r1 APPLE Cpu1Cst 3000
INTL 20061109)
[ 7.200002] Marking TSC unstable due to TSC halts in idle
[ 7.200181] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 7.200328] processor ACPI_CPU:01: registered as cooling_device1
[ 7.200335] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 7.415576] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.485535] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 7.506058] Clocksource tsc unstable (delta = -87102483 ns)
[ 7.527634] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 7.548819] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack
module option or
[ 7.570224] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 7.613206] arp_tables: (C) 2002 David S. Miller
[ 7.664637] usbcore: registered new interface driver isight_firmware
[ 7.715844] usbcore: registered new interface driver uvcvideo
[ 7.737914] USB Video Class driver (v0.1.0)
[ 7.789624] ipmi message handler version 39.2
[ 7.820453] IPMI Watchdog: driver initialized
[ 7.857808] Bluetooth: Core ver 2.14
[ 7.880864] NET: Registered protocol family 31
[ 7.903760] Bluetooth: HCI device and connection manager initialized
[ 7.927066] Bluetooth: HCI socket layer initialized
[ 7.950371] Bluetooth: L2CAP ver 2.11
[ 7.973366] Bluetooth: L2CAP socket layer initialized
[ 8.016416] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 8.059870] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 8.083126] usbcore: registered new interface driver btusb
[ 8.113765] Bluetooth: RFCOMM socket layer initialized
[ 8.136925] Bluetooth: RFCOMM TTY layer initialized
[ 8.160125] Bluetooth: RFCOMM ver 1.10
[ 8.190540] Bluetooth: SCO (Voice Link) ver 0.6
[ 8.213832] Bluetooth: SCO socket layer initialized
[ 8.246550] Bluetooth: HCI UART driver ver 2.2
[ 8.269905] Bluetooth: HCI H4 protocol initialized
[ 8.293335] Bluetooth: HCI BCSP protocol initialized
[ 8.426280] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 8.752572] udev: starting version 140
[ 9.022041] input: Power Button (FF)
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 9.080122] ACPI: Power Button (FF) [PWRF]
[ 9.093312] input: Power Button (CM)
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 9.256422] ACPI: Power Button (CM) [PWRB]
[ 9.269776] input: Sleep Button (CM)
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 9.300105] ACPI: Sleep Button (CM) [SLPB]
[ 9.327217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 9.341526] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 9.354951] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19
(level, low) -> IRQ 19
[ 9.368603] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 9.368605] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 9.382226] SELinux: initialized (dev usbfs, type usbfs), uses
genfs_contexts
[ 9.382317] ehci_hcd 0000:00:04.1: new USB bus registered, assigned
bus number 1
[ 9.395987] ehci_hcd 0000:00:04.1: debug port 1
[ 9.409527] ehci_hcd 0000:00:04.1: cache line size of 32 is not
supported
[ 9.409547] ehci_hcd 0000:00:04.1: irq 19, io mem 0xd3489200
[ 9.440188] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 9.453557] usb usb1: configuration #1 chosen from 1 choice
[ 9.466897] hub 1-0:1.0: USB hub found
[ 9.480067] hub 1-0:1.0: 7 ports detected
[ 9.494302] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 9.506866] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18
(level, low) -> IRQ 18
[ 9.519701] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 9.519705] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 9.532467] ehci_hcd 0000:00:06.1: new USB bus registered, assigned
bus number 2
[ 9.545291] ehci_hcd 0000:00:06.1: debug port 1
[ 9.558043] ehci_hcd 0000:00:06.1: cache line size of 32 is not
supported
[ 9.558062] ehci_hcd 0000:00:06.1: irq 18, io mem 0xd3489100
[ 9.590110] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 9.602783] usb usb2: configuration #1 chosen from 1 choice
[ 9.614932] hub 2-0:1.0: USB hub found
[ 9.626867] hub 2-0:1.0: 5 ports detected
[ 9.638967] Linux agpgart interface v0.103
[ 9.812612] usb 1-1: new high speed USB device using ehci_hcd and
address 2
[ 9.980230] usb 1-1: configuration #1 chosen from 1 choice
[ 10.003266] hub 1-1:1.0: USB hub found
[ 10.026103] hub 1-1:1.0: 3 ports detected
[ 10.103940] nvidia: module license 'NVIDIA' taints kernel.
[ 10.192783] usb 1-4: new high speed USB device using ehci_hcd and
address 3
[ 10.375881] usb 1-4: configuration #1 chosen from 1 choice
[ 10.381849] ACPI Exception (evregion-0422): AE_ERROR, Returned by
Handler for [PCI_Config] [20081204]
[ 10.381864] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.RP01.GFX0._PS0] (Node f703ecc0), AE_ERROR
[ 10.381974] ACPI: Transitioning device [GFX0] to D0
[ 10.381987] nvidia 0000:02:00.0: PCI INT A -> Link[Z003] -> GSI 23
(level, low) -> IRQ 23
[ 10.381994] nvidia 0000:02:00.0: setting latency timer to 64
[ 10.484846] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed
Feb 4 23:44:25 PST 2009
[ 10.506993] uvcvideo: Found UVC 1.00 device Built-in iSight
(05ac:8502)
[ 10.529060] ohci1394 0000:04:00.0: PCI INT A -> Link[Z00J] -> GSI 21
(level, low) -> IRQ 21
[ 10.530305] input: Built-in iSight
as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input4
[ 10.572728] ohci1394 0000:04:00.0: setting latency timer to 64
[ 10.634714] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]
MMIO=[d3100000-d31007ff] Max Packet=[4096] IR/IT contexts=[8/8]
[ 10.715922] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 10.738186] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17
(level, low) -> IRQ 17
[ 10.760696] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 10.901134] usb 1-1.1: new high speed USB device using ehci_hcd and
address 5
[ 11.032746] usb 1-1.1: configuration #1 chosen from 1 choice
[ 11.056337] hub 1-1.1:1.0: USB hub found
[ 11.079230] hub 1-1.1:1.0: 4 ports detected
[ 11.181134] usb 1-1.2: new low speed USB device using ehci_hcd and
address 6
[ 11.317625] usb 1-1.2: configuration #1 chosen from 1 choice
[ 11.345132] input: Apple Inc. Apple Keyboard
as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 11.440148] generic-usb 0003:05AC:021D.0001: input: USB HID v1.11
Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input0
[ 11.466726] input: Apple Inc. Apple Keyboard
as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 11.570136] generic-usb 0003:05AC:021D.0002: input: USB HID v1.11
Device [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input1
[ 11.671139] usb 1-1.3: new low speed USB device using ehci_hcd and
address 7
[ 11.807010] usb 1-1.3: configuration #1 chosen from 1 choice
[ 11.834936] input: Mitsumi Electric Apple Optical USB Mouse
as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[ 11.930165] apple 0003:05AC:0304.0003: input: USB HID v1.10 Mouse
[Mitsumi Electric Apple Optical USB Mouse] on
usb-0000:00:04.1-1.3/input0
[ 11.990322] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[0023dffffe8cd104]
[ 13.262189] Adding 300772k swap on /dev/sda4. Priority:1 extents:1
across:300772k
[ 14.669764] EXT3 FS on sda3, internal journal
[ 14.795625] SELinux: initialized (dev tmpfs, type tmpfs), uses
transition SIDs
[ 15.707328] type=1400 audit(1240003327.509:3): avc: denied
{ name_bind } for pid=1663 comm="syslogd" src=993
scontext=system_u:system_r:syslogd_t:s0
tcontext=system_u:object_r:pop_port_t:s0 tclass=tcp_socket
[ 15.707354] type=1300 audit(1240003327.509:3): arch=40000003
syscall=102 success=no exit=-13 a0=2 a1=bfa77adc a2=b8049ff4 a3=bfa77af0
items=0 ppid=1662 pid=1663 auid=4294967295 uid=0 gid=0 euid=0 suid=0
fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="syslogd"
exe="/sbin/syslogd" subj=system_u:system_r:syslogd_t:s0 key=(null)
[ 19.339083] ndiswrapper version 1.54-2.6.27.7 loaded (smp=yes,
preempt=no)
[ 19.604633] ndiswrapper: driver bcmwl5 (Broadcom,03/21/2008,
4.170.77.3) loaded
[ 19.605282] ndiswrapper 0000:03:00.0: power state changed by ACPI to
D0
[ 19.605453] ndiswrapper 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI
22 (level, low) -> IRQ 22
[ 19.605734] ndiswrapper 0000:03:00.0: power state changed by ACPI to
D0
[ 19.605842] ndiswrapper 0000:03:00.0: setting latency timer to 64
[ 19.619146] ndiswrapper: using IRQ 22
[ 19.830242] wlan0 (ndiswrapper): not using net_device_ops yet
[ 19.830759] wlan0: ethernet device 00:1f:f3:bd:f0:98 using NDIS
driver: bcmwl5, version: 0x4aa4d03, NDIS version: 0x501, vendor: 'NDIS
Network Adapter', 14E4:432B.5.conf
[ 19.830809] wlan0: encryption modes supported: WEP; TKIP with WPA,
WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 19.835333] usbcore: registered new interface driver ndiswrapper
[ 23.691555] type=1401 audit(1240003335.499:4): SELinux: unrecognized
netlink message type=28265 for sclass=43
[ 23.691558]
everything works.
regards;
Justin P. mattock
|
