Thanks! It was the SVN version of lm_sensors that I was missing. Once
that got installed it works.
Kernel 2.6.21.1-mactel worked with lm_sensors 2.10.3.
Scott =3D)
Soeren Sonnenburg wrote:
> On Tue, 2007-06-19 at 14:13 -0500, Scott L. Price wrote:
>> I wonder if there is a kernel config that I am missing. When I use
>> 2.6.21.1-mactel all the sensor information showed up. Now that I am
>> using 2.6.22-rc5 I don't get any sensor information out of it. I just=
get:
>>
>> crazyharry prices # sensors
>> coretemp-isa-0000
> [...]
>=20
>> I am on a MBP 2,2. I am running Gentoo AMD64 2007.1. I can get you m=
y
>> kernel config if you want, but as you can see applesmc is showing up i=
n
>> the sensors, it just shows no sensors on it. I have applesmc loaded a=
s
>> a module.
>=20
> Hmmmh. Did you really get something like this before ?
>=20
> $ sensors
> applesmc-isa-0300
> Adapter: ISA adapter
> temp1: +29=B0C
> temp2: +40=B0C
> temp3: +54=B0C
> temp4: +48=B0C
> temp5: +52=B0C
> temp6: +53=B0C
> temp7: +55=B0C
> temp8: +46=B0C
> temp9: +43=B0C
> temp10: +50=B0C
> temp11: +38=B0C
> temp12: +38=B0C
> fan1: 2502 RPM (safe =3D 1200 RPM, min =3D 2500 RPM, max =3D 6000 R=
PM)
> fan2: 2498 RPM (safe =3D 1200 RPM, min =3D 2500 RPM, max =3D 6000 R=
PM)
>=20
> If not you need lm-sensors from svn... else I don't know it should be
> enough to load applesmc.
>=20
> Soeren
--=20
Electrical Engineering/Web Development
Hunt Utilities Group LLC http://www.hugllc.com
Pine River, MN (218) 587-5001
Hopkins, MN (952) 935-2418
|
