From: Calin B. <cbr...@ya...> - 2007-06-05 02:48:39
|
> > --- Calin Brabandt <cbr...@ya...> wrote: > >> I compiled 0.9.72 on my Mac mini under Ubuntu >> Feisty. >> I can't seem to get X11 video support working. I >> have >> a guest Mac OS install of 10.3.9 Panther with the >> display set to 1024x768x75. The X11 host is running >> 1440x900x75. >> >> In molrc.video, I have: >> >> resolution: 640/480/75 >> depth: 32 >> >> and I've tried other "hinted" video modes in >> molrc.video and guest modes < 1440x900 I've also >> tried setting the X11 host to 1280x1024. >> >> When I try to force X11 output using >> >> enable_console_video: no >> start_on_console: no >> autoswitch_console: no >> >> I get "No video modes at all was found - exiting" >> >> calinb@ppc:~/mol-0.9.72$ Mac-on-Linux 0.9.72 [Jun 3 >> 2007 15:47] >> Copyright (C) 1997-2004 Samuel Rydh >> Starting MOL session 1 >> Running in PowerPC 7400 mode, 512 MB RAM >> Timebase: 41.62 MHz, Bus: 166.48 MHz, Clock: 1416 >> MHz >> Using USB mouse on /dev/input/mice >> OHCI USB controller registered >> Video driver(s): >> No video modes at all was found - exiting >> cleaning up... >> Terminating threads... >> DONE >> >> I've compiled with and without XDGA support, just to >> see if it makes a difference. >> >> I quite happy with the Console FB performance but >> would like to try X11 windowed mode too. Any help >> or >> suggestions are much appreciated. >> >> Also, could someone please explain what is lost in >> going to 10.4 Tiger and broken MOL "acceleration?" >> >> Thanks again, >> >> -Cal >> > Can you paste your entire molrc.video? Thanks. > > -- > Nathan Smith Thanks, Nathan. I also have the following warning during the build: + Entering Linux Building modules, stage 2. WARNING: could not find /home/calinb/mol-0.9.72/obj-ppc/build/src/kmod/.traps.o.cmd for /home/calinb/mol-0.9.72/obj-ppc/build/src/kmod/traps.o Kernel source : /lib/modules/2.6.20.3-ubuntu1-mol/build Module compiled for : 2.6.20.3-ubuntu1-mol Running kernel : 2.6.20.3-ubuntu1-mol + Entering netdriver Building modules, stage 2. Here's my .config-ppc for the build # # Automatically generated make config: don't edit # CONFIG_PPC=y # # Machine Specific Build Targets # # CONFIG_AMIGAONE is not set # CONFIG_OLDWORLD is not set CONFIG_FBDEV=y CONFIG_X11=y # CONFIG_VNC is not set # CONFIG_XDGA is not set CONFIG_ALSA=y CONFIG_OSS=y CONFIG_USBDEV=y CONFIG_PCIPROXY=y # # Debugging # # CONFIG_DEBUGGER is not set # CONFIG_TTYDRIVER is not set # CONFIG_SCSIDEBUG is not set # CONFIG_DUMP_PACKETS is not set # CONFIG_DHCP_DEBUG is not set # CONFIG_HOSTED is not set # # Network drivers # # CONFIG_TUN is not set # CONFIG_TAP is not set CONFIG_SHEEP=y I built the latest stock 2.6.20.3 Ubuntu kernel from source, just to make sure my header files were correct. I didn't change anything in .config. Here's my complete molrc.video: # -*- perl -*- (for emacs syntax coloring) # # Mac-on-Linux video configuration # # ---------------------------------------------------------------------- # Startup Resolution (this is used as a hint only) # ---------------------------------------------------------------------- # resolution: 640/480/75 # width/height/Hz depth: 32 # ---------------------------------------------------------------------- # X11 Settings # ---------------------------------------------------------------------- # # Some config options: # # xdisplay: remote.host:0.0 # use_backing_store: yes/no # # Backing store is primarily useful if the X-connection is remote. # Note: X11-video is not as fast as full-screen video. enable_xvideo: yes # ---------------------------------------------------------------------- # Fullscreen (Console/fbdev) Settings # ---------------------------------------------------------------------- # # The tool 'molvconfig' is used to configure the fullscreen mode. # # Some config options: # # vt: 9 # VT-number to use # gamma: 1.0 # gamma (parameter between 0.1 and 1.0) # gamma: 1.0 1.0 1.0 # gamma (r,g,b) # # Ctrl-Cmd-Space switches back to the orignal VT enable_console_video: no start_on_console: no # switch to console initially autoswitch_console: no # allow automatic switching to console #fb_modes: /etc/fb.modes # extra video modes for molvconfig # ---------------------------------------------------------------------- # XDGA (X11 fullscreen) Settings # ---------------------------------------------------------------------- # # At startup, all available XDGA modes are listed. Unfortunately, # some of the modes might be broken (depending on the video card # and the XFree86 version). # # By default, MOL uses just a single mode with high # probability of working. However, it is possible to manually # specify multiple modes. For instance # # xdga_modes: 3 5 9 # # instructs MOL to use mode 3, 5 and 9. # # Cntrl-Cmd-Space leaves XDGA mode and switches back to X enable_xdga_video: no # ---------------------------------------------------------------------- # VNC Settings # ---------------------------------------------------------------------- # # For VNC information, visit http://www.uk.research.att.com/vnc/ # enable_vncvideo: no # Enable the VNC server vnc_port: 5900 # port to use for VNC Thanks for your help, -Cal ____________________________________________________________________________________ Moody friends. Drama queens. Your life? Nope! - their life, your story. Play Sims Stories at Yahoo! Games. http://sims.yahoo.com/ |