https://sourceforge.net/p/m2mlabs/wiki/RaspberryPiSample/Recent changes to RaspberryPiSampleenSat, 07 Mar 2015 17:02:24 -0000https://sourceforge.net/p/m2mlabs/wiki/RaspberryPiSample/<div class="markdown_content"><h1 id="raspberry-pi-hardware-device">Raspberry Pi Hardware Device</h1> <p>This is a sample project that runs on a Raspberry Pi open source hardware device, For more information or Raspberry Pi please look at <a href="http://www.raspberrypi.org." rel="nofollow">http://www.raspberrypi.org.</a> The sample code is written in Python and reads the CPU temperature of the Raspberry PI every 5 seconds n times and sends it to the m2mlabs server.</p> <ul> <li>download the sample code from <a href="http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download">http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download</a></li> <li>create a device with sensor name "tcore" and attribute name "temperature" in the m2mlabs admin GUI. How to create device models, sensor models and devices is described in the <a class="" href="https://sourceforge.net/p/m2mlabs/wiki/Tutorial">Tutorial</a></li> <li>install Python on the Raspberry PI if it is not already installed</li> <li>edit config.txt in samples/python/config and change server url, apikey and device name to your settings</li> <li>run python m2mlabs_send.py in samples/python</li> <li>check if data was received on the m2mlabs admin GUI at <a href="http://localhost/cs-ws:8080" rel="nofollow">http://localhost/cs-ws:8080</a> or run the monitor at <a href="http://localhost/cs-ws:8080/monitor.html." rel="nofollow">http://localhost/cs-ws:8080/monitor.html.</a> The usage of the monitor is described in the <a class="" href="https://sourceforge.net/p/m2mlabs/wiki/Tutorial-Monitor">Monitor Tutorial</a></li> </ul></div>JimSat, 07 Mar 2015 17:02:24 -0000https://sourceforge.netf6fb3197d9b06f6420a9921794d6b4a10caf4f37