Recent changes to ArduinoSample

ArduinoSample modified by Jim

Jim — Sat, 07 Mar 2015 11:11:48 -0000

--- v4
+++ v5
@@ -6,7 +6,7 @@
 * download the Arduino software from http://arduino.cc/en/Main/Software and follow the installation inctructions
 * download the sample code from http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download
 * load samples/arduino/SimpleDevice/SimpleDevice.ino into the Arduino IDE
-![Arduino Sample](https://sourceforge.net/p/m2mlabs/mainspring/ci/default/tree/doc/pictures/Arduino_editor.jpg?format=raw "Arduino sample")
+![Arduino Sample](http://m2mlabs.com/sites/default/files/pictures/Arduino_editor.jpg?format=raw "Arduino sample")
 * edit the MAC Address so that is equal to the MAC address of your board. You will find the mac address on a sticker on the back of the ethernet shield
 * enter server specific configuration data in the sketch (apikey, m2mlabs server ip address, m2mlabs server port)
 * edit the device name, sensor name and attribute name as you have defined in the m2mlabs admin GUI. How to create device models, sensor models and devices is described in the [Tutorial](https://sourceforge.net/p/m2mlabs/wiki/Tutorial)

ArduinoSample modified by Jim

Jim — Sat, 07 Mar 2015 10:39:21 -0000

--- v3
+++ v4
@@ -13,4 +13,4 @@
 * the sample program reads values on analog input 0 of the board
 * download to the board and press the reset button on the board
 * the serial monitor on the Arduino IDE allows you check if the connection is open and data is sent
-* check if data was received on the Mainspring Gui at http://localhost/cs-ws:8080 or run the monitor at http://localhost/cs-ws:8080/monitor.html. The usage of the monitor is described in the [Tutorial](https://sourceforge.net/p/m2mlabs/wiki/Tutorial-Monitor)
+* check if data was received on the m2mlabs admin GUI at http://localhost/cs-ws:8080 or run the monitor at http://localhost/cs-ws:8080/monitor.html. The usage of the monitor is described in the [Monitor Tutorial](https://sourceforge.net/p/m2mlabs/wiki/Tutorial-Monitor)

ArduinoSample modified by Jim

Jim — Fri, 06 Mar 2015 20:00:23 -0000

--- v2
+++ v3
@@ -2,11 +2,10 @@

 This is a sample project that runs on an Arduino open source hardware device, For more information or Arduino please look at http://www.arduino.cc

-Download the sample code from http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download
-
 * get an Arduino Uno board from the [Arduino store](http://store.arduino.cc/eu/index.php?main_page=index&cPath=11_12) or another distributor. Choose either a board with an integrated Ethernet connector or add an Ethernet shield
 * download the Arduino software from http://arduino.cc/en/Main/Software and follow the installation inctructions
-* load the SimpleDevice.ino sample application into the Arduino IDE
+* download the sample code from http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download
+* load samples/arduino/SimpleDevice/SimpleDevice.ino into the Arduino IDE
 ![Arduino Sample](https://sourceforge.net/p/m2mlabs/mainspring/ci/default/tree/doc/pictures/Arduino_editor.jpg?format=raw "Arduino sample")
 * edit the MAC Address so that is equal to the MAC address of your board. You will find the mac address on a sticker on the back of the ethernet shield
 * enter server specific configuration data in the sketch (apikey, m2mlabs server ip address, m2mlabs server port)

ArduinoSample modified by Jim

Jim — Fri, 06 Mar 2015 19:18:24 -0000

--- v1
+++ v2
@@ -1,6 +1,8 @@
 # Arduino Hardware Device

 This is a sample project that runs on an Arduino open source hardware device, For more information or Arduino please look at http://www.arduino.cc
+
+Download the sample code from http://sourceforge.net/projects/m2mlabs/files/samples/samples.zip/download

 * get an Arduino Uno board from the [Arduino store](http://store.arduino.cc/eu/index.php?main_page=index&cPath=11_12) or another distributor. Choose either a board with an integrated Ethernet connector or add an Ethernet shield
 * download the Arduino software from http://arduino.cc/en/Main/Software and follow the installation inctructions

ArduinoSample modified by Jim

Jim — Fri, 06 Mar 2015 19:14:17 -0000

Arduino Hardware Device

This is a sample project that runs on an Arduino open source hardware device, For more information or Arduino please look at http://www.arduino.cc

get an Arduino Uno board from the Arduino store or another distributor. Choose either a board with an integrated Ethernet connector or add an Ethernet shield
download the Arduino software from http://arduino.cc/en/Main/Software and follow the installation inctructions
load the SimpleDevice.ino sample application into the Arduino IDE
edit the MAC Address so that is equal to the MAC address of your board. You will find the mac address on a sticker on the back of the ethernet shield
enter server specific configuration data in the sketch (apikey, m2mlabs server ip address, m2mlabs server port)
edit the device name, sensor name and attribute name as you have defined in the m2mlabs admin GUI. How to create device models, sensor models and devices is described in the Tutorial
the sample program reads values on analog input 0 of the board
download to the board and press the reset button on the board
the serial monitor on the Arduino IDE allows you check if the connection is open and data is sent
check if data was received on the Mainspring Gui at http://localhost/cs-ws:8080 or run the monitor at http://localhost/cs-ws:8080/monitor.html. The usage of the monitor is described in the Tutorial