[lwatch-cvs] files Makefile.in,1.5,1.6 aclocal.m4,1.3,1.4 configure,1.3,1.4 configure.ac,1.1,1.2
Brought to you by:
arturcz
|
From: <ar...@us...> - 2003-01-29 00:37:04
|
Update of /cvsroot/lwatch/files
In directory sc8-pr-cvs1:/tmp/cvs-serv21744
Modified Files:
Makefile.in aclocal.m4 configure configure.ac
Log Message:
- backporting to autoconf 2.53; kinda magic, isn't it?
Index: Makefile.in
===================================================================
RCS file: /cvsroot/lwatch/files/Makefile.in,v
retrieving revision 1.5
retrieving revision 1.6
diff -C2 -d -r1.5 -r1.6
*** Makefile.in 28 Jan 2003 23:31:00 -0000 1.5
--- Makefile.in 29 Jan 2003 00:37:00 -0000 1.6
***************
*** 1,6 ****
! # Makefile.in generated automatically by automake 1.5 from Makefile.am.
! # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
! # Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
--- 1,5 ----
! # Makefile.in generated automatically by automake 1.4-p4 from Makefile.am
! # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
***************
*** 12,16 ****
# PARTICULAR PURPOSE.
- @SET_MAKE@
SHELL = @SHELL@
--- 11,14 ----
***************
*** 34,40 ****
--- 32,42 ----
includedir = @includedir@
oldincludedir = /usr/include
+
+ DESTDIR =
+
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+
top_builddir = .
***************
*** 45,53 ****
INSTALL = @INSTALL@
! INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
- INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
--- 47,55 ----
INSTALL = @INSTALL@
! INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
+
NORMAL_INSTALL = :
PRE_INSTALL = :
***************
*** 56,108 ****
PRE_UNINSTALL = :
POST_UNINSTALL = :
- AMTAR = @AMTAR@
- AWK = @AWK@
CC = @CC@
- DEPDIR = @DEPDIR@
- EXEEXT = @EXEEXT@
- INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LEX = @LEX@
! OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
- am__include = @am__include@
- am__quote = @am__quote@
- install_sh = @install_sh@
SUBDIRS = src
- subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
! CONFIG_HEADER = $(top_builddir)/src/config.h
! CONFIG_CLEAN_FILES =
! DIST_SOURCES =
- RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
- uninstall-info-recursive all-recursive install-data-recursive \
- install-exec-recursive installdirs-recursive install-recursive \
- uninstall-recursive check-recursive installcheck-recursive
- DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
- Makefile.in NEWS aclocal.m4 configure configure.ac depcomp \
- install-sh missing mkinstalldirs
- DIST_SUBDIRS = $(SUBDIRS)
- all: all-recursive
.SUFFIXES:
! $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
! cd $(top_srcdir) && \
! $(AUTOMAKE) --gnu Makefile
! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
! cd $(top_builddir) && \
! CONFIG_HEADERS= CONFIG_LINKS= \
! CONFIG_FILES=$@ $(SHELL) ./config.status
! $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
! $(SHELL) ./config.status --recheck
! $(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
! cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): configure.ac
! cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
! uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
--- 58,98 ----
PRE_UNINSTALL = :
POST_UNINSTALL = :
CC = @CC@
LEX = @LEX@
! LN_S = @LN_S@
! MAKEINFO = @MAKEINFO@
PACKAGE = @PACKAGE@
VERSION = @VERSION@
SUBDIRS = src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
! CONFIG_HEADER = ./src/config.h
! CONFIG_CLEAN_FILES =
! DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
! Makefile.in NEWS THANKS TODO aclocal.m4 configure configure.ac \
! install-sh missing mkinstalldirs
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+ TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
.SUFFIXES:
! $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
! cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
! Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
! cd $(top_builddir) \
! && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): configure.ac
! cd $(srcdir) && $(ACLOCAL)
!
! config.status: $(srcdir)/configure.ac $(CONFIG_STATUS_DEPENDENCIES)
! $(SHELL) ./config.status --recheck
! $(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
! cd $(srcdir) && $(AUTOCONF)
# This directory's subdirectories are mostly independent; you can cd
***************
*** 112,116 ****
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
! $(RECURSIVE_TARGETS):
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
--- 102,111 ----
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
!
! @SET_MAKE@
!
! all-recursive install-data-recursive install-exec-recursive \
! installdirs-recursive install-recursive uninstall-recursive \
! check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
***************
*** 135,148 ****
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
! case "$@" in \
! distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
! *) list='$(SUBDIRS)' ;; \
! esac; \
! rev=''; for subdir in $$list; do \
! if test "$$subdir" = "."; then :; else \
! rev="$$subdir $$rev"; \
! fi; \
done; \
! rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
--- 130,138 ----
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
! rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
! rev="$$subdir $$rev"; \
! test "$$subdir" = "." && dot_seen=yes; \
done; \
! test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
***************
*** 163,225 ****
tags: TAGS
! ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
! unique=`for i in $$list; do \
! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! done | \
! $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
! mkid -fID $$unique $(LISP)
! TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
! $(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
! if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
! fi; \
done; \
! list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
! unique=`for i in $$list; do \
! if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
! done | \
! $(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
! || etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
! GTAGS:
! here=`CDPATH=: && cd $(top_builddir) && pwd` \
! && cd $(top_srcdir) \
! && gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
! -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
! DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
- top_distdir = .
- # Avoid unsightly `./'.
distdir = $(PACKAGE)-$(VERSION)
! GZIP_ENV = --best
!
distdir: $(DISTFILES)
! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
mkdir $(distdir)
@for file in $(DISTFILES); do \
! if test -f $$file; then d=.; else d=$(srcdir); fi; \
! dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
! if test "$$dir" != "$$file" && test "$$dir" != "."; then \
! $(mkinstalldirs) "$(distdir)/$$dir"; \
! fi; \
if test -d $$d/$$file; then \
! cp -pR $$d/$$file $(distdir) \
! || exit 1; \
else \
test -f $(distdir)/$$file \
! || cp -p $$d/$$file $(distdir)/$$file \
! || exit 1; \
fi; \
done
--- 153,239 ----
tags: TAGS
! ID: $(HEADERS) $(SOURCES) $(LISP)
! list='$(SOURCES) $(HEADERS)'; \
! unique=`for i in $$list; do echo $$i; done | \
! awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
! here=`pwd` && cd $(srcdir) \
! && mkid -f$$here/ID $$unique $(LISP)
! TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
! if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
! fi; \
done; \
! list='$(SOURCES) $(HEADERS)'; \
! unique=`for i in $$list; do echo $$i; done | \
! awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
! || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
! mostlyclean-tags:
!
! clean-tags:
distclean-tags:
! -rm -f TAGS ID
! maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
+ top_distdir = $(distdir)
! # This target untars the dist file and tries a VPATH configuration. Then
! # it guarantees that the distribution is self-contained by making another
! # tarfile.
! distcheck: dist
! -rm -rf $(distdir)
! GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
! mkdir $(distdir)/=build
! mkdir $(distdir)/=inst
! dc_install_base=`cd $(distdir)/=inst && pwd`; \
! cd $(distdir)/=build \
! && ../configure --srcdir=.. --prefix=$$dc_install_base \
! && $(MAKE) $(AM_MAKEFLAGS) \
! && $(MAKE) $(AM_MAKEFLAGS) dvi \
! && $(MAKE) $(AM_MAKEFLAGS) check \
! && $(MAKE) $(AM_MAKEFLAGS) install \
! && $(MAKE) $(AM_MAKEFLAGS) installcheck \
! && $(MAKE) $(AM_MAKEFLAGS) dist
! -rm -rf $(distdir)
! @banner="$(distdir).tar.gz is ready for distribution"; \
! dashes=`echo "$$banner" | sed s/./=/g`; \
! echo "$$dashes"; \
! echo "$$banner"; \
! echo "$$dashes"
! dist: distdir
! -chmod -R a+r $(distdir)
! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
! -rm -rf $(distdir)
! dist-all: distdir
! -chmod -R a+r $(distdir)
! GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
! -rm -rf $(distdir)
distdir: $(DISTFILES)
! -rm -rf $(distdir)
mkdir $(distdir)
+ -chmod 777 $(distdir)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
@for file in $(DISTFILES); do \
! d=$(srcdir); \
if test -d $$d/$$file; then \
! cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
! || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
! || cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
***************
*** 229,299 ****
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
! (cd $$subdir && \
! $(MAKE) $(AM_MAKEFLAGS) \
! top_distdir="$(top_distdir)" \
! distdir=../$(distdir)/$$subdir \
! distdir) \
|| exit 1; \
fi; \
done
! -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
! || chmod -R a+r $(distdir)
! dist: distdir
! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
!
! # This target untars the dist file and tries a VPATH configuration. Then
! # it guarantees that the distribution is self-contained by making another
! # tarfile.
! distcheck: dist
! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
! GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
! chmod -R a-w $(distdir); chmod a+w $(distdir)
! mkdir $(distdir)/=build
! mkdir $(distdir)/=inst
! chmod a-w $(distdir)
! dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
! && cd $(distdir)/=build \
! && ../configure --srcdir=.. --prefix=$$dc_install_base \
! && $(MAKE) $(AM_MAKEFLAGS) \
! && $(MAKE) $(AM_MAKEFLAGS) dvi \
! && $(MAKE) $(AM_MAKEFLAGS) check \
! && $(MAKE) $(AM_MAKEFLAGS) install \
! && $(MAKE) $(AM_MAKEFLAGS) installcheck \
! && $(MAKE) $(AM_MAKEFLAGS) uninstall \
! && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
! || (echo "Error: files left after uninstall" 1>&2; \
! exit 1) ) \
! && $(MAKE) $(AM_MAKEFLAGS) dist \
! && $(MAKE) $(AM_MAKEFLAGS) distclean \
! && rm -f $(distdir).tar.gz \
! && (test `find . -type f -print | wc -l` -eq 0 \
! || (echo "Error: files left after distclean" 1>&2; \
! exit 1) )
! -chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
! @echo "$(distdir).tar.gz is ready for distribution" | \
! sed 'h;s/./=/g;p;x;p;x'
check-am: all-am
check: check-recursive
! all-am: Makefile
! installdirs: installdirs-recursive
! installdirs-am:
!
! install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
- uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
!
! installcheck: installcheck-recursive
install-strip:
! $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
! `test -z '$(STRIP)' || \
! echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
--- 243,278 ----
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
! chmod 777 $(distdir)/$$subdir; \
! (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
! info-am:
! info: info-recursive
! dvi-am:
! dvi: dvi-recursive
check-am: all-am
check: check-recursive
! installcheck-am:
! installcheck: installcheck-recursive
! install-exec-am:
install-exec: install-exec-recursive
+
+ install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
! install: install-recursive
! uninstall-am:
! uninstall: uninstall-recursive
! all-am: Makefile
! all-redirect: all-recursive
install-strip:
! $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
! installdirs: installdirs-recursive
! installdirs-am:
!
!
mostlyclean-generic:
***************
*** 301,364 ****
distclean-generic:
! -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
maintainer-clean-generic:
! @echo "This command is intended for maintainers to use"
! @echo "it deletes files that may require special tools to rebuild."
! clean: clean-recursive
!
! clean-am: clean-generic mostlyclean-am
!
! dist-all: distdir
! $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
! -chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
! distclean: distclean-recursive
! -rm -f config.status config.cache config.log
! distclean-am: clean-am distclean-generic distclean-tags
!
! dvi: dvi-recursive
!
! dvi-am:
!
! info: info-recursive
! info-am:
! install-data-am:
! install-exec-am:
! install-info: install-info-recursive
! install-man:
! installcheck-am:
maintainer-clean: maintainer-clean-recursive
! maintainer-clean-am: distclean-am maintainer-clean-generic
!
! mostlyclean: mostlyclean-recursive
!
! mostlyclean-am: mostlyclean-generic
!
! uninstall-am: uninstall-info-am
!
! uninstall-info: uninstall-info-recursive
- .PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
- clean-generic clean-recursive dist dist-all distcheck distclean \
- distclean-generic distclean-recursive distclean-tags distdir \
- dvi dvi-am dvi-recursive info info-am info-recursive install \
- install-am install-data install-data-am install-data-recursive \
- install-exec install-exec-am install-exec-recursive \
- install-info install-info-am install-info-recursive install-man \
- install-recursive install-strip installcheck installcheck-am \
- installdirs installdirs-am installdirs-recursive \
- maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-recursive tags tags-recursive uninstall \
- uninstall-am uninstall-info-am uninstall-info-recursive \
- uninstall-recursive
# Tell versions [3.59,3.63) of GNU make to not export all variables.
--- 280,321 ----
distclean-generic:
! -rm -f Makefile $(CONFIG_CLEAN_FILES)
! -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
! mostlyclean-am: mostlyclean-tags mostlyclean-generic
! mostlyclean: mostlyclean-recursive
! clean-am: clean-tags clean-generic mostlyclean-am
! clean: clean-recursive
! distclean-am: distclean-tags distclean-generic clean-am
! distclean: distclean-recursive
! -rm -f config.status
! maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \
! distclean-am
! @echo "This command is intended for maintainers to use;"
! @echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
+ -rm -f config.status
! .PHONY: install-data-recursive uninstall-data-recursive \
! install-exec-recursive uninstall-exec-recursive installdirs-recursive \
! uninstalldirs-recursive all-recursive check-recursive \
! installcheck-recursive info-recursive dvi-recursive \
! mostlyclean-recursive distclean-recursive clean-recursive \
! maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
! distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
! dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
! install-exec install-data-am install-data install-am install \
! uninstall-am uninstall all-redirect all-am all installdirs-am \
! installdirs mostlyclean-generic distclean-generic clean-generic \
! maintainer-clean-generic clean mostlyclean distclean maintainer-clean
# Tell versions [3.59,3.63) of GNU make to not export all variables.
Index: aclocal.m4
===================================================================
RCS file: /cvsroot/lwatch/files/aclocal.m4,v
retrieving revision 1.3
retrieving revision 1.4
diff -C2 -d -r1.3 -r1.4
*** aclocal.m4 28 Jan 2003 23:31:00 -0000 1.3
--- aclocal.m4 29 Jan 2003 00:37:00 -0000 1.4
***************
*** 1,14 ****
! # aclocal.m4 generated automatically by aclocal 1.5
! # Copyright 1996, 1997, 1998, 1999, 2000, 2001
! # Free Software Foundation, Inc.
! # This file is free software; the Free Software Foundation
! # gives unlimited permission to copy and/or distribute it,
! # with or without modifications, as long as this notice is preserved.
! # This program is distributed in the hope that it will be useful,
! # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! # PARTICULAR PURPOSE.
# Do all the work for Automake. This macro actually does too much --
--- 1,13 ----
! dnl aclocal.m4 generated automatically by aclocal 1.4-p4
! dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
! dnl This file is free software; the Free Software Foundation
! dnl gives unlimited permission to copy and/or distribute it,
! dnl with or without modifications, as long as this notice is preserved.
! dnl This program is distributed in the hope that it will be useful,
! dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
! dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
! dnl PARTICULAR PURPOSE.
# Do all the work for Automake. This macro actually does too much --
***************
*** 16,104 ****
# But this isn't really a big deal.
! # serial 5
!
! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
! # written in clear, in which case automake, when reading aclocal.m4,
! # will think it sees a *use*, and therefore will trigger all it's
! # C support machinery. Also note that it means that autoscan, seeing
! # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
!
!
! # We require 2.13 because we rely on SHELL being computed by configure.
! AC_PREREQ([2.13])
!
! # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
! # -----------------------------------------------------------
! # If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
! # The purpose of this macro is to provide the user with a means to
! # check macros which are provided without letting her know how the
! # information is coded.
! # If this macro is not defined by Autoconf, define it here.
! ifdef([AC_PROVIDE_IFELSE],
! [],
! [define([AC_PROVIDE_IFELSE],
! [ifdef([AC_PROVIDE_$1],
! [$2], [$3])])])
! # AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
! # ----------------------------------------------
! AC_DEFUN([AM_INIT_AUTOMAKE],
! [AC_REQUIRE([AC_PROG_INSTALL])dnl
! # test to see if srcdir already configured
! if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
! test -f $srcdir/config.status; then
! AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
fi
-
- # Define the identity of the package.
- PACKAGE=$1
- AC_SUBST(PACKAGE)dnl
- VERSION=$2
- AC_SUBST(VERSION)dnl
ifelse([$3],,
! [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
! AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])
!
! # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
! # the ones we care about.
! ifdef([m4_pattern_allow],
! [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl
!
! # Autoconf 2.50 always computes EXEEXT. However we need to be
! # compatible with 2.13, for now. So we always define EXEEXT, but we
! # don't compute it.
! AC_SUBST(EXEEXT)
! # Similar for OBJEXT -- only we only use OBJEXT if the user actually
! # requests that it be used. This is a bit dumb.
! : ${OBJEXT=o}
! AC_SUBST(OBJEXT)
!
! # Some tools Automake needs.
! AC_REQUIRE([AM_SANITY_CHECK])dnl
! AC_REQUIRE([AC_ARG_PROGRAM])dnl
! AM_MISSING_PROG(ACLOCAL, aclocal)
! AM_MISSING_PROG(AUTOCONF, autoconf)
! AM_MISSING_PROG(AUTOMAKE, automake)
! AM_MISSING_PROG(AUTOHEADER, autoheader)
! AM_MISSING_PROG(MAKEINFO, makeinfo)
! AM_MISSING_PROG(AMTAR, tar)
! AM_PROG_INSTALL_SH
! AM_PROG_INSTALL_STRIP
! # We need awk for the "check" target. The system "awk" is bad on
! # some platforms.
! AC_REQUIRE([AC_PROG_AWK])dnl
! AC_REQUIRE([AC_PROG_MAKE_SET])dnl
! AC_REQUIRE([AM_DEP_TRACK])dnl
! AC_REQUIRE([AM_SET_DEPDIR])dnl
! AC_PROVIDE_IFELSE([AC_PROG_][CC],
! [_AM_DEPENDENCIES(CC)],
! [define([AC_PROG_][CC],
! defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
! AC_PROVIDE_IFELSE([AC_PROG_][CXX],
! [_AM_DEPENDENCIES(CXX)],
! [define([AC_PROG_][CXX],
! defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
! ])
#
--- 15,46 ----
# But this isn't really a big deal.
! # serial 1
+ dnl Usage:
+ dnl AM_INIT_AUTOMAKE(package,version, [no-define])
! AC_DEFUN(AM_INIT_AUTOMAKE,
! [AC_REQUIRE([AC_PROG_INSTALL])
! PACKAGE=[$1]
! AC_SUBST(PACKAGE)
! VERSION=[$2]
! AC_SUBST(VERSION)
! dnl test to see if srcdir already configured
! if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
! AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
fi
ifelse([$3],,
! AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
! AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
! AC_REQUIRE([AM_SANITY_CHECK])
! AC_REQUIRE([AC_ARG_PROGRAM])
! dnl FIXME This is truly gross.
! missing_dir=`cd $ac_aux_dir && pwd`
! AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
! AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
! AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
! AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
! AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
! AC_REQUIRE([AC_PROG_MAKE_SET])])
#
***************
*** 106,118 ****
#
! # serial 3
!
! # AM_SANITY_CHECK
! # ---------------
! AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
! echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
--- 48,56 ----
#
! AC_DEFUN(AM_SANITY_CHECK,
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
! echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
***************
*** 121,132 ****
# directory).
if (
! set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
! if test "$[*]" = "X"; then
# -L didn't work.
! set X `ls -t $srcdir/configure conftest.file`
fi
! rm -f conftest.file
! if test "$[*]" != "X $srcdir/configure conftest.file" \
! && test "$[*]" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
--- 59,69 ----
# directory).
if (
! set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
! if test "[$]*" = "X"; then
# -L didn't work.
! set X `ls -t $srcdir/configure conftestfile`
fi
! if test "[$]*" != "X $srcdir/configure conftestfile" \
! && test "[$]*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
***************
*** 138,142 ****
fi
! test "$[2]" = conftest.file
)
then
--- 75,79 ----
fi
! test "[$]2" = conftestfile
)
then
***************
*** 147,568 ****
Check your system clock])
fi
AC_MSG_RESULT(yes)])
!
! # serial 2
!
! # AM_MISSING_PROG(NAME, PROGRAM)
! # ------------------------------
! AC_DEFUN([AM_MISSING_PROG],
! [AC_REQUIRE([AM_MISSING_HAS_RUN])
! $1=${$1-"${am_missing_run}$2"}
! AC_SUBST($1)])
!
!
! # AM_MISSING_HAS_RUN
! # ------------------
! # Define MISSING if not defined so far and test if it supports --run.
! # If it does, set am_missing_run to use it, otherwise, to nothing.
! AC_DEFUN([AM_MISSING_HAS_RUN],
! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
! # Use eval to expand $SHELL
! if eval "$MISSING --run true"; then
! am_missing_run="$MISSING --run "
! else
! am_missing_run=
! am_backtick='`'
! AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
! fi
! ])
!
! # AM_AUX_DIR_EXPAND
!
! # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
! # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
! # `$srcdir', `$srcdir/..', or `$srcdir/../..'.
! #
! # Of course, Automake must honor this variable whenever it calls a
! # tool from the auxiliary directory. The problem is that $srcdir (and
! # therefore $ac_aux_dir as well) can be either absolute or relative,
! # depending on how configure is run. This is pretty annoying, since
! # it makes $ac_aux_dir quite unusable in subdirectories: in the top
! # source directory, any form will work fine, but in subdirectories a
! # relative path needs to be adjusted first.
! #
! # $ac_aux_dir/missing
! # fails when called from a subdirectory if $ac_aux_dir is relative
! # $top_srcdir/$ac_aux_dir/missing
! # fails if $ac_aux_dir is absolute,
! # fails when called from a subdirectory in a VPATH build with
! # a relative $ac_aux_dir
! #
! # The reason of the latter failure is that $top_srcdir and $ac_aux_dir
! # are both prefixed by $srcdir. In an in-source build this is usually
! # harmless because $srcdir is `.', but things will broke when you
! # start a VPATH build or use an absolute $srcdir.
! #
! # So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
! # iff we strip the leading $srcdir from $ac_aux_dir. That would be:
! # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
! # and then we would define $MISSING as
! # MISSING="\${SHELL} $am_aux_dir/missing"
! # This will work as long as MISSING is not called from configure, because
! # unfortunately $(top_srcdir) has no meaning in configure.
! # However there are other variables, like CC, which are often used in
! # configure, and could therefore not use this "fixed" $ac_aux_dir.
! #
! # Another solution, used here, is to always expand $ac_aux_dir to an
! # absolute PATH. The drawback is that using absolute paths prevent a
! # configured tree to be moved without reconfiguration.
!
! AC_DEFUN([AM_AUX_DIR_EXPAND], [
! # expand $ac_aux_dir to an absolute path
! am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
! ])
!
! # AM_PROG_INSTALL_SH
! # ------------------
! # Define $install_sh.
! AC_DEFUN([AM_PROG_INSTALL_SH],
! [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
! install_sh=${install_sh-"$am_aux_dir/install-sh"}
! AC_SUBST(install_sh)])
!
! # One issue with vendor `install' (even GNU) is that you can't
! # specify the program used to strip binaries. This is especially
! # annoying in cross-compiling environments, where the build's strip
! # is unlikely to handle the host's binaries.
! # Fortunately install-sh will honor a STRIPPROG variable, so we
! # always use install-sh in `make install-strip', and initialize
! # STRIPPROG with the value of the STRIP variable (set by the user).
! AC_DEFUN([AM_PROG_INSTALL_STRIP],
! [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
! INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
! AC_SUBST([INSTALL_STRIP_PROGRAM])])
!
! # serial 4 -*- Autoconf -*-
!
!
!
! # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
! # written in clear, in which case automake, when reading aclocal.m4,
! # will think it sees a *use*, and therefore will trigger all it's
! # C support machinery. Also note that it means that autoscan, seeing
! # CC etc. in the Makefile, will ask for an AC_PROG_CC use...
!
!
!
! # _AM_DEPENDENCIES(NAME)
! # ---------------------
! # See how the compiler implements dependency checking.
! # NAME is "CC", "CXX" or "OBJC".
! # We try a few techniques and use that to set a single cache variable.
! #
! # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
! # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
! # dependency, and given that the user is not expected to run this macro,
! # just rely on AC_PROG_CC.
! AC_DEFUN([_AM_DEPENDENCIES],
! [AC_REQUIRE([AM_SET_DEPDIR])dnl
! AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
! AC_REQUIRE([AM_MAKE_INCLUDE])dnl
! AC_REQUIRE([AM_DEP_TRACK])dnl
!
! ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
! [$1], CXX, [depcc="$CXX" am_compiler_list=],
! [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
! [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
! [depcc="$$1" am_compiler_list=])
!
! AC_CACHE_CHECK([dependency style of $depcc],
! [am_cv_$1_dependencies_compiler_type],
! [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
! # We make a subdir and do the tests there. Otherwise we can end up
! # making bogus files that we don't know about and never remove. For
! # instance it was reported that on HP-UX the gcc test will end up
! # making a dummy file named `D' -- because `-MD' means `put the output
! # in D'.
! mkdir conftest.dir
! # Copy depcomp to subdir because otherwise we won't find it if we're
! # using a relative directory.
! cp "$am_depcomp" conftest.dir
! cd conftest.dir
!
! am_cv_$1_dependencies_compiler_type=none
! if test "$am_compiler_list" = ""; then
! am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
! fi
! for depmode in $am_compiler_list; do
! # We need to recreate these files for each test, as the compiler may
! # overwrite some of them when testing with obscure command lines.
! # This happens at least with the AIX C compiler.
! echo '#include "conftest.h"' > conftest.c
! echo 'int i;' > conftest.h
! echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
!
! case $depmode in
! nosideeffect)
! # after this tag, mechanisms are not by side-effect, so they'll
! # only be used when explicitly requested
! if test "x$enable_dependency_tracking" = xyes; then
! continue
! else
! break
! fi
! ;;
! none) break ;;
! esac
! # We check with `-c' and `-o' for the sake of the "dashmstdout"
! # mode. It turns out that the SunPro C++ compiler does not properly
! # handle `-M -o', and we need to detect this.
! if depmode=$depmode \
! source=conftest.c object=conftest.o \
! depfile=conftest.Po tmpdepfile=conftest.TPo \
! $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
! grep conftest.h conftest.Po > /dev/null 2>&1 &&
! ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
! am_cv_$1_dependencies_compiler_type=$depmode
! break
! fi
! done
!
! cd ..
! rm -rf conftest.dir
! else
! am_cv_$1_dependencies_compiler_type=none
! fi
! ])
! $1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
! AC_SUBST([$1DEPMODE])
! ])
!
!
! # AM_SET_DEPDIR
! # -------------
! # Choose a directory name for dependency files.
! # This macro is AC_REQUIREd in _AM_DEPENDENCIES
! AC_DEFUN([AM_SET_DEPDIR],
! [rm -f .deps 2>/dev/null
! mkdir .deps 2>/dev/null
! if test -d .deps; then
! DEPDIR=.deps
else
! # MS-DOS does not allow filenames that begin with a dot.
! DEPDIR=_deps
! fi
! rmdir .deps 2>/dev/null
! AC_SUBST(DEPDIR)
! ])
!
!
! # AM_DEP_TRACK
! # ------------
! AC_DEFUN([AM_DEP_TRACK],
! [AC_ARG_ENABLE(dependency-tracking,
! [ --disable-dependency-tracking Speeds up one-time builds
! --enable-dependency-tracking Do not reject slow dependency extractors])
! if test "x$enable_dependency_tracking" != xno; then
! am_depcomp="$ac_aux_dir/depcomp"
! AMDEPBACKSLASH='\'
! fi
! AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
! pushdef([subst], defn([AC_SUBST]))
! subst(AMDEPBACKSLASH)
! popdef([subst])
! ])
!
! # Generate code to set up dependency tracking.
! # This macro should only be invoked once -- use via AC_REQUIRE.
! # Usage:
! # AM_OUTPUT_DEPENDENCY_COMMANDS
!
! #
! # This code is only required when automatic dependency tracking
! # is enabled. FIXME. This creates each `.P' file that we will
! # need in order to bootstrap the dependency handling code.
! AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
! AC_OUTPUT_COMMANDS([
! test x"$AMDEP_TRUE" != x"" ||
! for mf in $CONFIG_FILES; do
! case "$mf" in
! Makefile) dirpart=.;;
! */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
! *) continue;;
! esac
! grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
! # Extract the definition of DEP_FILES from the Makefile without
! # running `make'.
! DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
! test -z "$DEPDIR" && continue
! # When using ansi2knr, U may be empty or an underscore; expand it
! U=`sed -n -e '/^U = / s///p' < "$mf"`
! test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
! # We invoke sed twice because it is the simplest approach to
! # changing $(DEPDIR) to its actual value in the expansion.
! for file in `sed -n -e '
! /^DEP_FILES = .*\\\\$/ {
! s/^DEP_FILES = //
! :loop
! s/\\\\$//
! p
! n
! /\\\\$/ b loop
! p
! }
! /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
! sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
! # Make sure the directory exists.
! test -f "$dirpart/$file" && continue
! fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
! $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
! # echo "creating $dirpart/$file"
! echo '# dummy' > "$dirpart/$file"
! done
! done
! ], [AMDEP_TRUE="$AMDEP_TRUE"
! ac_aux_dir="$ac_aux_dir"])])
!
! # AM_MAKE_INCLUDE()
! # -----------------
! # Check to see how make treats includes.
! AC_DEFUN([AM_MAKE_INCLUDE],
! [am_make=${MAKE-make}
! cat > confinc << 'END'
! doit:
! @echo done
! END
! # If we don't find an include directive, just comment out the code.
! AC_MSG_CHECKING([for style of include used by $am_make])
! am__include='#'
! am__quote=
! _am_result=none
! # First try GNU make style include.
! echo "include confinc" > confmf
! # We grep out `Entering directory' and `Leaving directory'
! # messages which can occur if `w' ends up in MAKEFLAGS.
! # In particular we don't look at `^make:' because GNU make might
! # be invoked under some other name (usually "gmake"), in which
! # case it prints its new name instead of `make'.
! if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
! am__include=include
! am__quote=
! _am_result=GNU
! fi
! # Now try BSD make style include.
! if test "$am__include" = "#"; then
! echo '.include "confinc"' > confmf
! if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
! am__include=.include
! am__quote='"'
! _am_result=BSD
! fi
fi
! AC_SUBST(am__include)
! AC_SUBST(am__quote)
! AC_MSG_RESULT($_am_result)
! rm -f confinc confmf
! ])
!
! # serial 3
!
! # AM_CONDITIONAL(NAME, SHELL-CONDITION)
! # -------------------------------------
! # Define a conditional.
! #
! # FIXME: Once using 2.50, use this:
! # m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
! AC_DEFUN([AM_CONDITIONAL],
! [ifelse([$1], [TRUE],
! [errprint(__file__:__line__: [$0: invalid condition: $1
! ])dnl
! m4exit(1)])dnl
! ifelse([$1], [FALSE],
! [errprint(__file__:__line__: [$0: invalid condition: $1
! ])dnl
! m4exit(1)])dnl
! AC_SUBST([$1_TRUE])
! AC_SUBST([$1_FALSE])
! if $2; then
! $1_TRUE=
! $1_FALSE='#'
! else
! $1_TRUE='#'
! $1_FALSE=
! fi])
# Like AC_CONFIG_HEADER, but automatically create stamp file.
! # serial 3
!
! # When config.status generates a header, we must update the stamp-h file.
! # This file resides in the same directory as the config header
! # that is generated. We must strip everything past the first ":",
! # and everything past the last "/".
!
! AC_PREREQ([2.12])
!
! AC_DEFUN([AM_CONFIG_HEADER],
! [ifdef([AC_FOREACH],dnl
! [dnl init our file count if it isn't already
! m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
! dnl prepare to store our destination file list for use in config.status
! AC_FOREACH([_AM_File], [$1],
! [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
! m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
! dnl and add it to the list of files AC keeps track of, along
! dnl with our hook
! AC_CONFIG_HEADERS(_AM_File,
! dnl COMMANDS, [, INIT-CMDS]
! [# update the timestamp
! echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
! ][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
! m4_popdef([_AM_Dest])])],dnl
! [AC_CONFIG_HEADER([$1])
! AC_OUTPUT_COMMANDS(
! ifelse(patsubst([$1], [[^ ]], []),
! [],
! [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
! patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
! [am_indx=1
! for am_file in $1; do
! case " \$CONFIG_HEADERS " in
! *" \$am_file "*)
! am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
! if test -n "\$am_dir"; then
! am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
! for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
! am_tmpdir=\$am_tmpdir\$am_subdir/
! if test ! -d \$am_tmpdir; then
! mkdir \$am_tmpdir
! fi
! done
! fi
! echo timestamp > "\$am_dir"stamp-h\$am_indx
;;
esac
! am_indx=\`expr \$am_indx + 1\`
! done])
! ])]) # AM_CONFIG_HEADER
!
! # _AM_DIRNAME(PATH)
! # -----------------
! # Like AS_DIRNAME, only do it during macro expansion
! AC_DEFUN([_AM_DIRNAME],
! [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
! m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
! m4_if(m4_regexp([$1], [^/.*]), -1,
! [.],
! m4_patsubst([$1], [^\(/\).*], [\1])),
! m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
! m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
! ]) # _AM_DIRNAME
! # AM_PROG_LEX
! # Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
! AC_DEFUN([AM_PROG_LEX],
! [AC_REQUIRE([AM_MISSING_HAS_RUN])
! AC_CHECK_PROGS(LEX, flex lex, [${am_missing_run}flex])
AC_PROG_LEX
AC_DECL_YYTEXT])
--- 84,135 ----
Check your system clock])
fi
+ rm -f conftest*
AC_MSG_RESULT(yes)])
! dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
! dnl The program must properly implement --version.
! AC_DEFUN(AM_MISSING_PROG,
! [AC_MSG_CHECKING(for working $2)
! # Run test in a subshell; some versions of sh will print an error if
! # an executable is not found, even if stderr is redirected.
! # Redirect stdin to placate older versions of autoconf. Sigh.
! if ($2 --version) < /dev/null > /dev/null 2>&1; then
! $1=$2
! AC_MSG_RESULT(found)
else
! $1="$3/missing $2"
! AC_MSG_RESULT(missing)
fi
! AC_SUBST($1)])
# Like AC_CONFIG_HEADER, but automatically create stamp file.
! AC_DEFUN(AM_CONFIG_HEADER,
! [AC_PREREQ([2.12])
! AC_CONFIG_HEADER([$1])
! dnl When config.status generates a header, we must update the stamp-h file.
! dnl This file resides in the same directory as the config header
! dnl that is generated. We must strip everything past the first ":",
! dnl and everything past the last "/".
! AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
! ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
! <<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
! <<am_indx=1
! for am_file in <<$1>>; do
! case " <<$>>CONFIG_HEADERS " in
! *" <<$>>am_file "*<<)>>
! echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
;;
esac
! am_indx=`expr "<<$>>am_indx" + 1`
! done<<>>dnl>>)
! changequote([,]))])
! dnl AM_PROG_LEX
! dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
! AC_DEFUN(AM_PROG_LEX,
! [missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1)
! AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
AC_PROG_LEX
AC_DECL_YYTEXT])
Index: configure
===================================================================
RCS file: /cvsroot/lwatch/files/configure,v
retrieving revision 1.3
retrieving revision 1.4
diff -C2 -d -r1.3 -r1.4
*** configure 28 Jan 2003 23:31:01 -0000 1.3
--- configure 29 Jan 2003 00:37:00 -0000 1.4
***************
*** 1,5 ****
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
! # Generated by GNU Autoconf 2.57 for lwatch 0.1.
#
# Report bugs to <ar...@he...>.
--- 1,5 ----
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
! # Generated by GNU Autoconf 2.53 for lwatch 0.1.
#
[...3930 lines suppressed...]
esac
done
***************
*** 5572,5580 ****
if test "$no_create" != yes; then
ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
! $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
--- 4972,4977 ----
if test "$no_create" != yes; then
ac_cs_success=:
exec 5>/dev/null
! $SHELL $CONFIG_STATUS || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
Index: configure.ac
===================================================================
RCS file: /cvsroot/lwatch/files/configure.ac,v
retrieving revision 1.1
retrieving revision 1.2
diff -C2 -d -r1.1 -r1.2
*** configure.ac 28 Jan 2003 23:31:01 -0000 1.1
--- configure.ac 29 Jan 2003 00:37:00 -0000 1.2
***************
*** 3,7 ****
# $Source$
! AC_PREREQ(2.57)
AC_INIT([lwatch], [0.1], [ar...@he...])
AM_INIT_AUTOMAKE([lwatch],[0.1])
--- 3,7 ----
# $Source$
! #AC_PREREQ(2.57)
AC_INIT([lwatch], [0.1], [ar...@he...])
AM_INIT_AUTOMAKE([lwatch],[0.1])
***************
*** 12,18 ****
--- 12,21 ----
# Checks for programs.
AC_PROG_CC
+ AC_PROG_INSTALL
+ AC_PROG_LN_S
AM_PROG_LEX
# Checks for libraries.
+ AC_CHECK_LIB([pcre], [pcre_version],, AC_MSG_ERROR([Error: libpcre not installed. Install first. ]))
# Checks for header files.
***************
*** 25,29 ****
# Checks for library functions.
AC_FUNC_MALLOC
! AC_FUNC_REALLOC
AC_TYPE_SIGNAL
AC_FUNC_VPRINTF
--- 28,32 ----
# Checks for library functions.
AC_FUNC_MALLOC
! #AC_FUNC_REALLOC
AC_TYPE_SIGNAL
AC_FUNC_VPRINTF
|