Re: [Ltsp-discuss] pxe. intel pro 10/100

[Conrad L. <con...@ro...>]

Jeffrey, you need to update your PXE code to v2.0 or higher.



----- Original Message ----- 
From: "jeffrey payao" <jef...@im...>
To: <lts...@li...>
Sent: Saturday, September 07, 2002 7:06 AM
Subject: [Ltsp-discuss] pxe. intel pro 10/100


> im building an ltsp with all my nodes having intelpro 10/100 cards. i
> can boot them easily with floppy on, but i cant run them on pxe mode.
> (no floppy)... here is my configuration. i actually did it on  PXE+LTSP
> how to. its a great how to. i wonder i cant get my stuff in turn.
> 
>  client side:
> 
>  INTEL UNDI, PXE-1.0 (B   uild Dev)
>  Copyright(C) 1997,1998 INTEL CORPORATION
>  DHCP MAC ADDR: 00 90 27 50 3A CB
>  ......
>  after a while.
>  PXE-E53: NO BOOT FILENAME RECEIVED
>  DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER.
> 
> server side:
> 
>  i used: tail -f /var/log/messages
>  i got:
> 
>  dhcp: DHCPDISCOVER from 00:90:27:50:3A:CB: via eth0
>  dhcp: DHCPOFFER on 192.168.1.1 to 00:90:27:50:3A:CB: via eth0
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone?  Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _____________________________________________________________________
> Ltsp-discuss mailing list.   To un-subscribe, or change prefs, goto:
>       https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help,   try #ltsp channel on irc.openprojects.net
>