Menu
▾
▴
[LTP] [Query] Regarding network testcases
|
From: Manjeet P. <man...@sa...> - 2015-12-09 09:00:05
|
Hi,
I am facing issues while running some network testcases : e.g. if4-addr-change
This testcase belongs to latest (ltp-full-20150903.tar.bz2)
when I run this if4-addr-change, I exported two new env variables a) IPV4_NETWORK = "107.109.223" and IPV6_NETWORK = "fd00::1:1:1:1", b) LHOST_IFACES = eth0 and RHOST_IFACES = eth0, which is not exported in "test_net.sh" .
bacause "if4-addr-change " testcase invokes "est_net.sh".
testcase output:
<<<<<<<<<<<<<<<<<<<test_start>>>>>>>>>>>>>>>>>>>
tag(Testcase Name)=if4-addr-change stime=15540
cmdline="if4-addr-change"
contacts=""
analysis=exit
<<<<<<<<<<<<<<<<<<<test_output>>>>>>>>>>>>>>>>>>>
+ TST_TOTAL=1
+ TCID=if4-addr-change
+ TST_CLEANUP=tst_restore_ipaddr
+ . test_net.sh
++ '[' -z '' ']'
++ . test.sh
+++ export LTP_RET_VAL=0
+++ LTP_RET_VAL=0
+++ export TST_COUNT=1
+++ TST_COUNT=1
+++ export TST_LIB_LOADED=1
+++ TST_LIB_LOADED=1
+++ '[' -z if4-addr-change ']'
+++ '[' -z 1 ']'
+++ export TCID=if4-addr-change
+++ TCID=if4-addr-change
+++ export TST_TOTAL=1
+++ TST_TOTAL=1
+++ '[' -z /tmp/build_dir ']'
+++ export LTP_DATAROOT=/tmp/build_dir/testcases/data/if4-addr-change
+++ LTP_DATAROOT=/tmp/build_dir/testcases/data/if4-addr-change
++ TST_IPV6=
++ tst_read_opts
++ OPTIND=0
++ getopts :6 opt
++ OPTIND=0
+ CHECK_INTERVAL=0
+ LHOST_IPV4_HOST_MAX=254
+ trap 'tst_brkm TBROK '\''test interrupted'\''' INT
+ tst_check_cmds ifconfig
+ for cmd in '$*'
+ command -v ifconfig
+ tst_resm TINFO 'ifconfig changes IPv4 address 10 times'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=16
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : ifconfig changes IPv4 address 10 times'
if4-addr-change 1 TINFO : ifconfig changes IPv4 address 10 times
+ case "$ret" in
+ tst_restore_ipaddr
+ local type=lhost
+ local link_num=0
+ tst_init_iface lhost 0
+ local type=lhost
+ local link_num=0
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ tst_resm TINFO 'initialize '\''lhost'\'' '\''eth0'\'' interface'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=16
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : initialize '\''lhost'\'' '\''eth0'\'' interface'
if4-addr-change 1 TINFO : initialize 'lhost' 'eth0' interface
+ case "$ret" in
+ '[' lhost = lhost ']'
+ ip link set eth0 down
+ ip route flush dev eth0
+ ip addr flush dev eth0
+ ip link set eth0 up
+ return 0
+ local ret=0
+ local backup_tst_ipv6=
+ TST_IPV6=
+ tst_add_ipaddr lhost 0
+ local type=lhost
+ local link_num=0
+ local mask=24
+ '[' '' ']'
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ '[' lhost = lhost ']'
++ tst_ipaddr
++ local type=lhost
++ local ipv=4
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ tst_resm TINFO 'set local addr 107.109.223./24'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=16
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : set local addr 107.109.223./24'
if4-addr-change 1 TINFO : set local addr 107.109.223./24
+ case "$ret" in
++ tst_ipaddr
++ local type=lhost
++ local ipv=4
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ ip addr add 107.109.223./24 dev eth0
+ return 0
+ TST_IPV6=6
+ tst_add_ipaddr lhost 0
+ local type=lhost
+ local link_num=0
+ local mask=24
+ '[' 6 ']'
+ mask=64
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
++ awk '{ print $1 }'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ '[' lhost = lhost ']'
++ tst_ipaddr
++ local type=lhost
++ local ipv=6
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV6_HOST'
+++ tst_host=
++ '[' 6 ']'
++ echo fd00::1:1:1:1:
+ tst_resm TINFO 'set local addr fd00::1:1:1:1:/64'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=16
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : set local addr fd00::1:1:1:1:/64'
if4-addr-change 1 TINFO : set local addr fd00::1:1:1:1:/64
+ case "$ret" in
++ tst_ipaddr
++ local type=lhost
++ local ipv=6
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV6_HOST'
+++ tst_host=
++ '[' 6 ']'
++ echo fd00::1:1:1:1:
+ ip addr add fd00::1:1:1:1:/64 dev eth0
ip: RTNETLINK answers: Numerical result out of range
+ return 2
+ ret=2
+ TST_IPV6=
+ return 2
++ tst_iface
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
++ tst_ipaddr rhost
++ local type=rhost
++ local ipv=4
++ local tst_host=
++ '[' rhost = lhost ']'
++ eval 'tst_host=$RHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
++ tst_iface
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
++ tst_ipaddr rhost
++ local type=rhost
++ local ipv=4
++ local tst_host=
++ '[' rhost = lhost ']'
++ eval 'tst_host=$RHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ check_icmpv4_connectivity eth0 107.109.223.
++ tst_ipaddr rhost
++ local type=rhost
++ local ipv=4
++ local tst_host=
++ '[' rhost = lhost ']'
++ eval 'tst_host=$RHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ tst_brkm TBROK 'Failed to ping to 107.109.223.'
+ case "$1" in
+ local ret=TBROK
+ shift
+ tst_resm TBROK 'Failed to ping to 107.109.223.'
+ tst_flag2mask TBROK
+ case "$1" in
+ return 2
+ local mask=2
+ LTP_RET_VAL=18
+ local ret=TBROK
+ shift
+ echo 'if4-addr-change 1 TBROK : Failed to ping to 107.109.223.'
if4-addr-change 1 TBROK : Failed to ping to 107.109.223.
+ case "$ret" in
+ tst_exit
+ '[' -n tst_restore_ipaddr ']'
+ tst_restore_ipaddr
+ local type=lhost
+ local link_num=0
+ tst_init_iface lhost 0
+ local type=lhost
+ local link_num=0
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ tst_resm TINFO 'initialize '\''lhost'\'' '\''eth0'\'' interface'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=18
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : initialize '\''lhost'\'' '\''eth0'\'' interface'
if4-addr-change 1 TINFO : initialize 'lhost' 'eth0' interface
+ case "$ret" in
+ '[' lhost = lhost ']'
+ ip link set eth0 down
+ ip route flush dev eth0
+ ip addr flush dev eth0
+ ip link set eth0 up
+ return 0
+ local ret=0
+ local backup_tst_ipv6=
+ TST_IPV6=
+ tst_add_ipaddr lhost 0
+ local type=lhost
+ local link_num=0
+ local mask=24
+ '[' '' ']'
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ '[' lhost = lhost ']'
++ tst_ipaddr
++ local type=lhost
++ local ipv=4
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ tst_resm TINFO 'set local addr 107.109.223./24'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=18
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : set local addr 107.109.223./24'
if4-addr-change 1 TINFO : set local addr 107.109.223./24
+ case "$ret" in
++ tst_ipaddr
++ local type=lhost
++ local ipv=4
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV4_HOST'
+++ tst_host=
++ '[' '' ']'
++ echo 107.109.223.
+ ip addr add 107.109.223./24 dev eth0
+ return 0
+ TST_IPV6=6
+ tst_add_ipaddr lhost 0
+ local type=lhost
+ local link_num=0
+ local mask=24
+ '[' 6 ']'
+ mask=64
++ tst_iface lhost 0
++ local type=lhost
++ local link_num=0
++ link_num=1
++ awk '{ print $1 }'
+++ tst_get_ifaces lhost
+++ local type=lhost
+++ '[' lhost = lhost ']'
+++ echo eth0
++ echo eth0
+ local iface=eth0
+ '[' lhost = lhost ']'
++ tst_ipaddr
++ local type=lhost
++ local ipv=6
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV6_HOST'
+++ tst_host=
++ '[' 6 ']'
++ echo fd00::1:1:1:1:
+ tst_resm TINFO 'set local addr fd00::1:1:1:1:/64'
+ tst_flag2mask TINFO
+ case "$1" in
+ return 16
+ local mask=16
+ LTP_RET_VAL=18
+ local ret=TINFO
+ shift
+ echo 'if4-addr-change 1 TINFO : set local addr fd00::1:1:1:1:/64'
if4-addr-change 1 TINFO : set local addr fd00::1:1:1:1:/64
+ case "$ret" in
++ tst_ipaddr
++ local type=lhost
++ local ipv=6
++ local tst_host=
++ '[' lhost = lhost ']'
++ eval 'tst_host=$LHOST_IPV6_HOST'
+++ tst_host=
++ '[' 6 ']'
++ echo fd00::1:1:1:1:
+ ip addr add fd00::1:1:1:1:/64 dev eth0
ip: RTNETLINK answers: Numerical result out of range
+ return 2
+ ret=2
+ TST_IPV6=
+ return 2
+ exit 2
<<<<<<<<<<<<<<<<<<<execution_status>>>>>>>>>>>>
initiation_status="ok"
duration=13 termination_type=exited termination_id=2 corefile=no
cutime=49 cstime=627
<<<<<<<<<<<<<<<<<<<test_end>>>>>>>>>>>>>>>>>>>>>
Please check the IP addresses taken by the program, they are in wrong format.
Is there anything that I am missing to run this testcase ? . Also I tried to do manually fix to get IP addresses in correct way but that should not be done, it need many changes to be done in "test_net.sh".
This test scripts is invoked by other testcases like "network_stress.broken_ip". So all these testcases are failing.
Please suggest more detail regarding "test_net.sh".
Thanks
|
