Merged with changes from github (adds 4 more LPC8xx devices) Added support for flashing LPC2XXX devices with StartAddress other than 0 (also restored DOS line terminators for easy diffs)
Merged with changes from github (adds 4 more LPC8xx devices)
I have a similar issue where the uC has a bootloader and a separate application; I'd like to be able to flash the application without erasing the bootloader. For example, I would like to load code that starts at 0x8000. The issue is that lpcprog.c assumes that the file to be flashed is the full application that starts at sector 0 (address 0x0000) even if the .hex file does not contain those addresses. So it patches 0x14 (for ARM7) and erases sector 0, and starts programming at sector 1 and then finally...
I have a similar issue where the uC has a bootloader and a separate application; I'd like to be able to flash the application without erasing the bootloader. For example, I would like to load code that starts at 0x8000. The issue is that lpcprog.c seems to assume that hex file to be flashed is the full application that starts at sector 0 (address 0x0000) even if the .hex file does not contain those addresses. So it patches 0x14, erases sector 0, and then starts programming at sector 1 (even if that's...
I have a similar issue where the uC has a bootloader and a separate application; I'd like to be able to flash the application without erasing the bootloader. Is this possible?
hi there :) I created a pseudo 1.98 version to add support for the following parts...
hi there :) I created a pseudo 1.98 version to add support for the following parts...
Must changes: { 0x1600F701, 0x00000000, 0, "2361", 128, 34, 11, 4096, SectorTable_213x,...
I’m using lpc21isp (1.83) in preference to Flash Magic for build and test automation....
Build on Opensuse 13.1 Error Description: linux@linux:~/Downloads/lpc21ispchanges/lpc21isp_197>...
Downloaded lpc21isp 197 on Fedora 17. Out of the box the build fails with: $ make...
lpclpc21isp version 1.97
1.96 2014-01-08 Martin Maurer merged changes ...
lpc21isp version 1.95