Re: [Logicmail-devel] Support for "wav" attachements in IMAP
Brought to you by:
octorian
Menu
▾
▴
Re: [Logicmail-devel] Support for "wav" attachements in IMAP
|
From: Gopal K. <gka...@ci...> - 2011-01-15 21:55:26
|
Thank you. I will try it on Tuesday. Gopal On 1/15/11 11:25 AM, "Derek Konigsberg" <dko...@lo...> wrote: > Right in the middle of the "Downloading" section of the project website, > under the bullet for "Latest release: 2.0.0-Beta". There is an item > called "Pre-release branch automated builds", with a sub-item called > "Over-The-Air installation". > > It contains a number of links (one for each support BB OS version under > the following path: > http://www.logicprobe.org/builds/logicmail-2.0/latest/2.0.0/ > > I also updated the simple OTA page, but I won't always update it every > single time the build server runs. > > -Derek > > On 01/15/2011 01:49 PM, Gopal Kamalanathan wrote: >> Derek, >> >> Thanks for the quick fix. I am not able to figure out the location of the >> latest pre-prelease branch build. Can you send the link. >> >> If you can update the OTA page I will appreciate it. It is much easier and >> only way I know to install. >> >> Thanks, >> Gopal >> >> >> On 1/14/11 7:28 PM, "Derek Konigsberg"<dko...@lo...> wrote: >> >>> I was able to reproduce the issue by faking the behavior of your IMAP >>> server, and wrote this ticket: >>> http://www.logicprobe.org/proj/logicmail/ticket/274 >>> >>> I also checked in a fix for it, which should be in the latest >>> pre-release branch build. (Links are on the main project web page, >>> separated by BlackBerry OS version.) The official mobile-friendly >>> OTA-download page is only updated occasionally, and is a more manual >>> process. >>> >>> -Derek >>> >>> On 01/14/2011 07:24 PM, Gopal Kamalanathan wrote: >>>> Yeah, it is a server that I develop/maintain. >>>> >>>> Gopal >>>> >>>> >>>> On 1/14/11 4:18 PM, "Derek Konigsberg"<dko...@lo...> wrote: >>>> >>>>> So its a server you're developing (or maintaining), not one you just are >>>>> accessing? >>>>> >>>>> Returning a delimiter character in the LIST (and LSUB) response will >>>>> probably make LogicMail 2.0 start working. But I'll still try to see >>>>> about reproducing this (and fixing it) on my end just in case. (Its >>>>> rare that I'd get a useful bug report about something like this, so I >>>>> jump on any opportunity I can find.) >>>>> >>>>> -Derek >>>>> >>>>> On 01/14/2011 07:14 PM, Gopal Kamalanathan wrote: >>>>>> It is just single level of folders. But if it helps, I can return a >>>>>> DELIMITER. >>>>>> >>>>>> Thanks, >>>>>> Gopal >>>>>> >>>>>> >>>>>> On 1/14/11 4:09 PM, "Derek Konigsberg"<dko...@lo...> >>>>>> wrote: >>>>>> >>>>>>> Okay, sorry, didn't see the second half of your response. Your IMAP >>>>>>> server is definitely acting unusually in how it lists folders, so I'll >>>>>>> have to do some testing. That makes it a completely different issue >>>>>>> from attachment downloading, and probably a more serious one at that. >>>>>>> >>>>>>> Basically, it appears as though your IMAP server is not sending any >>>>>>> folder delimiter, and LogicMail is failing to handle this case. No >>>>>>> other IMAP server I've ever seen does this, so I wouldn't be surprised >>>>>>> if that's a bug in my software. (I think a lot of my folder-related >>>>>>> logic currently depends on knowing a delimiter character.) >>>>>>> >>>>>>> Can you create sub-folders on this server, or is it just a single level >>>>>>> of folders? >>>>>>> >>>>>>> -Derek >>>>>>> >>>>>>> On 01/14/2011 07:02 PM, Gopal Kamalanathan wrote: >>>>>>>> Derek, >>>>>>>> >>>>>>>> I did try 2.0.0.255 and I had described the issue with 255 in the lower >>>>>>>> part >>>>>>>> of the mail. >>>>>>>> >>>>>>>> Gopal >>>>>>>> >>>>>>>> >>>>>>>> On 1/14/11 3:45 PM, "Derek Konigsberg"<dko...@lo...> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Version 1.1.0 doesn't really support attachments, and hasn't been >>>>>>>>> updated in over a year. (and it was just minor bugfixes for the year >>>>>>>>> prior to that) >>>>>>>>> >>>>>>>>> You really should upgrade to the latest 2.0 beta build. Its like a >>>>>>>>> completely different application at this point. :-) >>>>>>>>> >>>>>>>>> -Derek >>>>>>>>> >>>>>>>>> On 01/14/2011 05:54 PM, Gopal Kamalanathan wrote: >>>>>>>>>> Derek, >>>>>>>>>> >>>>>>>>>> I think the problem I was describing is with version 1.1.0. The >>>>>>>>>> output >>>>>>>>>> of >>>>>>>>>> the IMAP interaction is as follows >>>>>>>>>> >>>>>>>>>> * OK CUE IMAP4 Server ready >>>>>>>>>> A0 LOGIN cjwhite >>>>>>>>>> A0 OK completed >>>>>>>>>> A1 CAPABILITY >>>>>>>>>> * CAPABILITY IMAP4rev1 LITERAL+ IDLE UIDPLUS >>>>>>>>>> A1 OK completed >>>>>>>>>> A2 LIST "" "" >>>>>>>>>> * LIST () NIL "" >>>>>>>>>> A2 OK completed >>>>>>>>>> A3 SELECT Inbox >>>>>>>>>> * FLAGS (\Answered \Deleted \Flagged \Recent \Seen) >>>>>>>>>> * 1 EXISTS >>>>>>>>>> * 0 RECENT >>>>>>>>>> * OK [UNSEEN 1] >>>>>>>>>> * OK [PERMANENTFLAGS (\Answered \Deleted \Flagged \Seen)] >>>>>>>>>> * OK [UIDNEXT 2] >>>>>>>>>> * OK [UIDVALIDITY 21662904] >>>>>>>>>> A3 OK [READ-WRITE] completed >>>>>>>>>> A4 FETCH 1 (FLAGS ENVELOPE) >>>>>>>>>> * 1 FETCH (FLAGS () ENVELOPE ("Fri, 11 Mar 2011 03:33:21 +1100 (EST)" >>>>>>>>>> "Voice >>>>>>>>>> message from 5000" (("cjwhite (cjwhite)" NIL "cjwhite" >>>>>>>>>> "localdomain")) >>>>>>>>>> NIL >>>>>>>>>> NIL (("cjwhite" NIL "cjwhite" "localdomain")) NIL NIL NIL >>>>>>>>>> "FTX1020A47Y-NME-FOC12081734-1299774801404")) >>>>>>>>>> A4 OK completed >>>>>>>>>> A5 FETCH 1 BODYSTRUCTURE >>>>>>>>>> * 1 FETCH (BODYSTRUCTURE (("TEXT" "plain" ("charset" "us-ascii")NIL >>>>>>>>>> NIL >>>>>>>>>> 3 >>>>>>>>>> 3 >>>>>>>>>> NIL NIL NIL)("Audio" "x-wav" ("name" "VM_2011.03.11_03.33.21.wav") >>>>>>>>>> NIL >>>>>>>>>> NIL >>>>>>>>>> "Base64" 100318 NIL NIL NIL) "mixed" ("boundary" >>>>>>>>>> "=CUE-MESSAGE-BODY=") >>>>>>>>>> NIL >>>>>>>>>> NIL)) >>>>>>>>>> A5 OK completed >>>>>>>>>> A6 FETCH 1 BODY[1] >>>>>>>>>> * 1 FETCH (BODY[1] {3} >>>>>>>>>> >>>>>>>>>> ) >>>>>>>>>> A6 OK completed >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> With version 2.0.0.255, I see a different problem, the client gets >>>>>>>>>> stuck >>>>>>>>>> when it is trying to show the folders in the server. >>>>>>>>>> * OK CUE IMAP4 Server ready >>>>>>>>>> * CAPABILITY IMAP4rev1 LITERAL+ IDLE UIDPLUS >>>>>>>>>> A0 OK completed >>>>>>>>>> A1 LOGIN cjwhite >>>>>>>>>> A1 OK completed >>>>>>>>>> A2 LIST "" "" >>>>>>>>>> * LIST () NIL "" >>>>>>>>>> A2 OK completed >>>>>>>>>> A3 LIST "" "%" >>>>>>>>>> * LIST (\Noinferiors) NIL "Inbox" >>>>>>>>>> * LIST (\Noinferiors) NIL "Deleted" >>>>>>>>>> A3 OK completed >>>>>>>>>> >>>>>>>>>> When I quit the client, I see the following error: >>>>>>>>>> Uncaught Exception: Application LogicMail (169) is not responding; >>>>>>>>>> process >>>>>>>>>> terminated >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Gopal >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 1/14/11 3:28 AM, "Derek Konigsberg"<dko...@lo...> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Gopal, >>>>>>>>>>> I put that message into my own test server, and it seemed to work >>>>>>>>>>> just >>>>>>>>>>> fine (including attachment download). However, there was a minor >>>>>>>>>>> bug >>>>>>>>>>> with messages having empty bodies on some mail servers, which I just >>>>>>>>>>> fixed. I suggest stepping up to 2.0.0.255 and testing again. >>>>>>>>>>> >>>>>>>>>>> If you're still having the problem on build 255, then I'd like to >>>>>>>>>>> see >>>>>>>>>>> is >>>>>>>>>>> the output of this IMAP command: >>>>>>>>>>> >>>>>>>>>>> A01 FETCH 1 (FLAGS UID ENVELOPE BODYSTRUCTURE) >>>>>>>>>>> >>>>>>>>>>> That's the command LogicMail uses when downloading the message list, >>>>>>>>>>> to >>>>>>>>>>> get all the header information it uses to decide what to do next. >>>>>>>>>>> >>>>>>>>>>> -Derek >>>>>>>>>>> >>>>>>>>>>> On 01/14/2011 02:29 AM, Gopal Kamalanathan wrote: >>>>>>>>>>>> I am attaching the MIME of a short message. The first part of the >>>>>>>>>>>> MIME >>>>>>>>>>>> is >>>>>>>>>>>> empty. LogicMail client fetches the first part and shows the >>>>>>>>>>>> content >>>>>>>>>>>> if >>>>>>>>>>>> there is any. But I never see it fetching the second part. >>>>>>>>>>>> >>>>>>>>>>>> If you would like to see the IMAP interaction I could capture and >>>>>>>>>>>> sent >>>>>>>>>>>> it >>>>>>>>>>>> to >>>>>>>>>>>> you tomorrow. >>>>>>>>>>>> >>>>>>>>>>>> The IMAP server is not publicly available software. >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> Gopal >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 1/13/11 6:17 PM, "Derek Konigsberg"<dko...@lo...> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>> On 01/13/2011 04:30 PM, Gopal Kamalanathan wrote: >>>>>>>>>>>> Hello, >>>>>>>>>>>> >>>>>>>>>>>> I am using Logicmail IMAP client in blackberry to connect to >>>>>>>>>>>> Cisco¹s >>>>>>>>>>>> Unity express voicemail system. >>>>>>>>>>>> The IMAP client does not seem to fetch the wav attachment of the >>>>>>>>>>>> voice >>>>>>>>>>>> message. Does Logic mail support downloading wav attachments? >>>>>>>>>>>> >>>>>>>>>>>> The MIME header of the attachment are >>>>>>>>>>>> >>>>>>>>>>>> Content-Type: Audio/x-wav; >>>>>>>>>>>> name="VM_2011.03.10_03.19.33.wav" >>>>>>>>>>>> Content-Transfer-Encoding: Base64 >>>>>>>>>>>> Content-Disposition: attachment; voice=Voice-Message; >>>>>>>>>>>> filename="VM_2011.03.10_03.19.33.wav" >>>>>>>>>>>> >>>>>>>>>>>> Yes, LogicMail supports downloading wav attachments, and >>>>>>>>>>>> attachments >>>>>>>>>>>> of >>>>>>>>>>>> any type. (It just only has embedded viewing for images, and >>>>>>>>>>>> doesn't >>>>>>>>>>>> yet support doing anything with other attachments but saving them.) >>>>>>>>>>>> >>>>>>>>>>>> There have been issues with auto-generated e-mails before, since >>>>>>>>>>>> they >>>>>>>>>>>> are more likely to be malformed (or awkwardly formatted) than >>>>>>>>>>>> anything >>>>>>>>>>>> created with a normal desktop E-Mail client. >>>>>>>>>>>> >>>>>>>>>>>> Any chance you could capture the raw MIME source of one of these >>>>>>>>>>>> messages (preferably with a very short voicemail wav), zip it up, >>>>>>>>>>>> and >>>>>>>>>>>> E-Mail it to me for testing? >>>>>>>>>>>> >>>>>>>>>>>> I'm also curious what IMAP server software your mail server is >>>>>>>>>>>> running, >>>>>>>>>>>> but there's a pretty good chance it isn't something I can easily >>>>>>>>>>>> run >>>>>>>>>>>> on >>>>>>>>>>>> my test server. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> --------------------------------------------------------------------- >>>>>>>>>> -- >>>>>>>>>> -- >>>>>>>>>> -- >>>>>>>>>> -- >>>>>>>>>>>> >>>>>>>>>> - >>>>>>>>>>>> Protect Your Site and Customers from Malware Attacks >>>>>>>>>>>> Learn about various malware tactics and how to avoid them. >>>>>>>>>>>> Understand >>>>>>>>>>>> malware threats, the impact they can have on your business, and how >>>>>>>>>>>> you >>>>>>>>>>>> can protect your company and customers by using code signing. >>>>>>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>> Logicmail-devel mailing list >>>>>>>>>>>> Log...@li... >>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>> ----------------------------------------------------------------------- >>>>>>>> -- >>>>>>>> -- >>>>>>>> -- >>>>>>>>>> >>>>>>>> - >>>>>>>>>> Protect Your Site and Customers from Malware Attacks >>>>>>>>>> Learn about various malware tactics and how to avoid them. Understand >>>>>>>>>> malware threats, the impact they can have on your business, and how >>>>>>>>>> you >>>>>>>>>> can protect your company and customers by using code signing. >>>>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>>>>>> _______________________________________________ >>>>>>>>>> Logicmail-devel mailing list >>>>>>>>>> Log...@li... >>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> ------------------------------------------------------------------------- >>>>>> -- >>>>>> -- >>>>>>>> >>>>>> - >>>>>>>> Protect Your Site and Customers from Malware Attacks >>>>>>>> Learn about various malware tactics and how to avoid them. Understand >>>>>>>> malware threats, the impact they can have on your business, and how you >>>>>>>> can protect your company and customers by using code signing. >>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>>>> _______________________________________________ >>>>>>>> Logicmail-devel mailing list >>>>>>>> Log...@li... >>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel >>>>>>> >>>>>> >>>>>> >>>>>> >>>> --------------------------------------------------------------------------- >>>> -- >>>>>> >>>> - >>>>>> Protect Your Site and Customers from Malware Attacks >>>>>> Learn about various malware tactics and how to avoid them. Understand >>>>>> malware threats, the impact they can have on your business, and how you >>>>>> can protect your company and customers by using code signing. >>>>>> http://p.sf.net/sfu/oracle-sfdevnl >>>>>> _______________________________________________ >>>>>> Logicmail-devel mailing list >>>>>> Log...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel >>>>> >>>> >>>> >>>> >> ----------------------------------------------------------------------------- >> >> >> - >>>> Protect Your Site and Customers from Malware Attacks >>>> Learn about various malware tactics and how to avoid them. Understand >>>> malware threats, the impact they can have on your business, and how you >>>> can protect your company and customers by using code signing. >>>> http://p.sf.net/sfu/oracle-sfdevnl >>>> _______________________________________________ >>>> Logicmail-devel mailing list >>>> Log...@li... >>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel >>> >> >> >> ----------------------------------------------------------------------------->> - >> Protect Your Site and Customers from Malware Attacks >> Learn about various malware tactics and how to avoid them. Understand >> malware threats, the impact they can have on your business, and how you >> can protect your company and customers by using code signing. >> http://p.sf.net/sfu/oracle-sfdevnl >> _______________________________________________ >> Logicmail-devel mailing list >> Log...@li... >> https://lists.sourceforge.net/lists/listinfo/logicmail-devel > |
