Re: [Logicmail-devel] Support for "wav" attachements in IMAP

[Derek K. <dko...@lo...>]

Right in the middle of the "Downloading" section of the project website, 
under the bullet for "Latest release: 2.0.0-Beta".  There is an item 
called "Pre-release branch automated builds", with a sub-item called 
"Over-The-Air installation".

It contains a number of links (one for each support BB OS version under 
the following path:
http://www.logicprobe.org/builds/logicmail-2.0/latest/2.0.0/

I also updated the simple OTA page, but I won't always update it every 
single time the build server runs.

-Derek

On 01/15/2011 01:49 PM, Gopal Kamalanathan wrote:
> Derek,
>
> Thanks for the quick fix.  I am not able to figure out the location of the
> latest pre-prelease branch build.  Can you send the link.
>
> If you can update the OTA page I will appreciate it.  It is much easier and
> only way I know to install.
>
> Thanks,
> Gopal
>
>
> On 1/14/11 7:28 PM, "Derek Konigsberg"<dko...@lo...>  wrote:
>
>> I was able to reproduce the issue by faking the behavior of your IMAP
>> server, and wrote this ticket:
>> http://www.logicprobe.org/proj/logicmail/ticket/274
>>
>> I also checked in a fix for it, which should be in the latest
>> pre-release branch build.  (Links are on the main project web page,
>> separated by BlackBerry OS version.)  The official mobile-friendly
>> OTA-download page is only updated occasionally, and is a more manual
>> process.
>>
>> -Derek
>>
>> On 01/14/2011 07:24 PM, Gopal Kamalanathan wrote:
>>> Yeah, it is a server that I develop/maintain.
>>>
>>> Gopal
>>>
>>>
>>> On 1/14/11 4:18 PM, "Derek Konigsberg"<dko...@lo...>   wrote:
>>>
>>>> So its a server you're developing (or maintaining), not one you just are
>>>> accessing?
>>>>
>>>> Returning a delimiter character in the LIST (and LSUB) response will
>>>> probably make LogicMail 2.0 start working.  But I'll still try to see
>>>> about reproducing this (and fixing it) on my end just in case.  (Its
>>>> rare that I'd get a useful bug report about something like this, so I
>>>> jump on any opportunity I can find.)
>>>>
>>>> -Derek
>>>>
>>>> On 01/14/2011 07:14 PM, Gopal Kamalanathan wrote:
>>>>> It is just single level of folders.  But if it helps, I can return a
>>>>> DELIMITER.
>>>>>
>>>>> Thanks,
>>>>> Gopal
>>>>>
>>>>>
>>>>> On 1/14/11 4:09 PM, "Derek Konigsberg"<dko...@lo...>    wrote:
>>>>>
>>>>>> Okay, sorry, didn't see the second half of your response.  Your IMAP
>>>>>> server is definitely acting unusually in how it lists folders, so I'll
>>>>>> have to do some testing.  That makes it a completely different issue
>>>>>> from attachment downloading, and probably a more serious one at that.
>>>>>>
>>>>>> Basically, it appears as though your IMAP server is not sending any
>>>>>> folder delimiter, and LogicMail is failing to handle this case.  No
>>>>>> other IMAP server I've ever seen does this, so I wouldn't be surprised
>>>>>> if that's a bug in my software.  (I think a lot of my folder-related
>>>>>> logic currently depends on knowing a delimiter character.)
>>>>>>
>>>>>> Can you create sub-folders on this server, or is it just a single level
>>>>>> of folders?
>>>>>>
>>>>>> -Derek
>>>>>>
>>>>>> On 01/14/2011 07:02 PM, Gopal Kamalanathan wrote:
>>>>>>> Derek,
>>>>>>>
>>>>>>> I did try 2.0.0.255 and I had described the issue with 255 in the lower
>>>>>>> part
>>>>>>> of the mail.
>>>>>>>
>>>>>>> Gopal
>>>>>>>
>>>>>>>
>>>>>>> On 1/14/11 3:45 PM, "Derek Konigsberg"<dko...@lo...>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Version 1.1.0 doesn't really support attachments, and hasn't been
>>>>>>>> updated in over a year.  (and it was just minor bugfixes for the year
>>>>>>>> prior to that)
>>>>>>>>
>>>>>>>> You really should upgrade to the latest 2.0 beta build.  Its like a
>>>>>>>> completely different application at this point. :-)
>>>>>>>>
>>>>>>>> -Derek
>>>>>>>>
>>>>>>>> On 01/14/2011 05:54 PM, Gopal Kamalanathan wrote:
>>>>>>>>> Derek,
>>>>>>>>>
>>>>>>>>> I think the problem I was describing is with version 1.1.0.  The output
>>>>>>>>> of
>>>>>>>>> the IMAP interaction is as follows
>>>>>>>>>
>>>>>>>>> * OK CUE IMAP4 Server ready
>>>>>>>>> A0 LOGIN cjwhite
>>>>>>>>> A0 OK completed
>>>>>>>>> A1 CAPABILITY
>>>>>>>>> * CAPABILITY IMAP4rev1 LITERAL+ IDLE UIDPLUS
>>>>>>>>> A1 OK completed
>>>>>>>>> A2 LIST "" ""
>>>>>>>>> * LIST () NIL ""
>>>>>>>>> A2 OK completed
>>>>>>>>> A3 SELECT Inbox
>>>>>>>>> * FLAGS (\Answered \Deleted \Flagged \Recent \Seen)
>>>>>>>>> * 1 EXISTS
>>>>>>>>> * 0 RECENT
>>>>>>>>> * OK [UNSEEN 1]
>>>>>>>>> * OK [PERMANENTFLAGS (\Answered \Deleted \Flagged \Seen)]
>>>>>>>>> * OK [UIDNEXT 2]
>>>>>>>>> * OK [UIDVALIDITY 21662904]
>>>>>>>>> A3 OK [READ-WRITE] completed
>>>>>>>>> A4 FETCH 1 (FLAGS ENVELOPE)
>>>>>>>>> * 1 FETCH (FLAGS () ENVELOPE ("Fri, 11 Mar 2011 03:33:21 +1100 (EST)"
>>>>>>>>> "Voice
>>>>>>>>> message from 5000" (("cjwhite (cjwhite)" NIL "cjwhite" "localdomain"))
>>>>>>>>> NIL
>>>>>>>>> NIL (("cjwhite" NIL "cjwhite" "localdomain")) NIL NIL NIL
>>>>>>>>> "FTX1020A47Y-NME-FOC12081734-1299774801404"))
>>>>>>>>> A4 OK completed
>>>>>>>>> A5 FETCH 1 BODYSTRUCTURE
>>>>>>>>> * 1 FETCH (BODYSTRUCTURE (("TEXT" "plain" ("charset" "us-ascii")NIL NIL
>>>>>>>>> 3
>>>>>>>>> 3
>>>>>>>>> NIL NIL NIL)("Audio" "x-wav" ("name" "VM_2011.03.11_03.33.21.wav") NIL
>>>>>>>>> NIL
>>>>>>>>> "Base64" 100318 NIL NIL NIL) "mixed" ("boundary" "=CUE-MESSAGE-BODY=")
>>>>>>>>> NIL
>>>>>>>>> NIL))
>>>>>>>>> A5 OK completed
>>>>>>>>> A6 FETCH 1 BODY[1]
>>>>>>>>> * 1 FETCH (BODY[1] {3}
>>>>>>>>>
>>>>>>>>> )
>>>>>>>>> A6 OK completed
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> With version 2.0.0.255, I see a different problem, the client gets
>>>>>>>>> stuck
>>>>>>>>> when it is trying to show the folders in the server.
>>>>>>>>> * OK CUE IMAP4 Server ready
>>>>>>>>> * CAPABILITY IMAP4rev1 LITERAL+ IDLE UIDPLUS
>>>>>>>>> A0 OK completed
>>>>>>>>> A1 LOGIN cjwhite
>>>>>>>>> A1 OK completed
>>>>>>>>> A2 LIST "" ""
>>>>>>>>> * LIST () NIL ""
>>>>>>>>> A2 OK completed
>>>>>>>>> A3 LIST "" "%"
>>>>>>>>> * LIST (\Noinferiors) NIL "Inbox"
>>>>>>>>> * LIST (\Noinferiors) NIL "Deleted"
>>>>>>>>> A3 OK completed
>>>>>>>>>
>>>>>>>>> When I quit the client, I see the following error:
>>>>>>>>> Uncaught Exception: Application LogicMail (169) is not responding;
>>>>>>>>> process
>>>>>>>>> terminated
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Gopal
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 1/14/11 3:28 AM, "Derek Konigsberg"<dko...@lo...>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>> Gopal,
>>>>>>>>>> I put that message into my own test server, and it seemed to work just
>>>>>>>>>> fine (including attachment download).  However, there was a minor bug
>>>>>>>>>> with messages having empty bodies on some mail servers, which I just
>>>>>>>>>> fixed.  I suggest stepping up to 2.0.0.255 and testing again.
>>>>>>>>>>
>>>>>>>>>> If you're still having the problem on build 255, then I'd like to see
>>>>>>>>>> is
>>>>>>>>>> the output of this IMAP command:
>>>>>>>>>>
>>>>>>>>>> A01 FETCH 1 (FLAGS UID ENVELOPE BODYSTRUCTURE)
>>>>>>>>>>
>>>>>>>>>> That's the command LogicMail uses when downloading the message list,
>>>>>>>>>> to
>>>>>>>>>> get all the header information it uses to decide what to do next.
>>>>>>>>>>
>>>>>>>>>> -Derek
>>>>>>>>>>
>>>>>>>>>> On 01/14/2011 02:29 AM, Gopal Kamalanathan wrote:
>>>>>>>>>>> I am attaching the MIME of a short message.  The first part of the
>>>>>>>>>>> MIME
>>>>>>>>>>> is
>>>>>>>>>>> empty.  LogicMail client fetches the first part and shows the content
>>>>>>>>>>> if
>>>>>>>>>>> there is any.  But I never see it fetching the second part.
>>>>>>>>>>>
>>>>>>>>>>> If you would like to see the IMAP interaction I could capture and
>>>>>>>>>>> sent
>>>>>>>>>>> it
>>>>>>>>>>> to
>>>>>>>>>>> you tomorrow.
>>>>>>>>>>>
>>>>>>>>>>> The IMAP server is not publicly available software.
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Gopal
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 1/13/11 6:17 PM, "Derek Konigsberg"<dko...@lo...>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> On 01/13/2011 04:30 PM, Gopal Kamalanathan wrote:
>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I am using Logicmail IMAP client in blackberry to connect to
>>>>>>>>>>>>> Cisco¹s
>>>>>>>>>>>>> Unity express voicemail system.
>>>>>>>>>>>>> The IMAP client does not seem to fetch the wav attachment of the
>>>>>>>>>>>>> voice
>>>>>>>>>>>>> message. Does Logic mail support downloading wav attachments?
>>>>>>>>>>>>>
>>>>>>>>>>>>> The MIME header of the attachment are
>>>>>>>>>>>>>
>>>>>>>>>>>>>           Content-Type: Audio/x-wav;
>>>>>>>>>>>>> name="VM_2011.03.10_03.19.33.wav"
>>>>>>>>>>>>>           Content-Transfer-Encoding: Base64
>>>>>>>>>>>>>           Content-Disposition: attachment; voice=Voice-Message;
>>>>>>>>>>>>>           filename="VM_2011.03.10_03.19.33.wav"
>>>>>>>>>>>>
>>>>>>>>>>>> Yes, LogicMail supports downloading wav attachments, and attachments
>>>>>>>>>>>> of
>>>>>>>>>>>> any type.  (It just only has embedded viewing for images, and
>>>>>>>>>>>> doesn't
>>>>>>>>>>>> yet support doing anything with other attachments but saving them.)
>>>>>>>>>>>>
>>>>>>>>>>>> There have been issues with auto-generated e-mails before, since
>>>>>>>>>>>> they
>>>>>>>>>>>> are more likely to be malformed (or awkwardly formatted) than
>>>>>>>>>>>> anything
>>>>>>>>>>>> created with a normal desktop E-Mail client.
>>>>>>>>>>>>
>>>>>>>>>>>> Any chance you could capture the raw MIME source of one of these
>>>>>>>>>>>> messages (preferably with a very short voicemail wav), zip it up,
>>>>>>>>>>>> and
>>>>>>>>>>>> E-Mail it to me for testing?
>>>>>>>>>>>>
>>>>>>>>>>>> I'm also curious what IMAP server software your mail server is
>>>>>>>>>>>> running,
>>>>>>>>>>>> but there's a pretty good chance it isn't something I can easily run
>>>>>>>>>>>> on
>>>>>>>>>>>> my test server.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>> -----------------------------------------------------------------------
>>>>>>>>> --
>>>>>>>>> --
>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>> -
>>>>>>>>>>> Protect Your Site and Customers from Malware Attacks
>>>>>>>>>>> Learn about various malware tactics and how to avoid them. Understand
>>>>>>>>>>> malware threats, the impact they can have on your business, and how
>>>>>>>>>>> you
>>>>>>>>>>> can protect your company and customers by using code signing.
>>>>>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> _______________________________________________
>>>>>>>>>>> Logicmail-devel mailing list
>>>>>>>>>>> Log...@li...
>>>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>> -------------------------------------------------------------------------
>>>>>>> --
>>>>>>> --
>>>>>>>>>
>>>>>>> -
>>>>>>>>> Protect Your Site and Customers from Malware Attacks
>>>>>>>>> Learn about various malware tactics and how to avoid them. Understand
>>>>>>>>> malware threats, the impact they can have on your business, and how you
>>>>>>>>> can protect your company and customers by using code signing.
>>>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl
>>>>>>>>> _______________________________________________
>>>>>>>>> Logicmail-devel mailing list
>>>>>>>>> Log...@li...
>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>> ---------------------------------------------------------------------------
>>>>> --
>>>>>>>
>>>>> -
>>>>>>> Protect Your Site and Customers from Malware Attacks
>>>>>>> Learn about various malware tactics and how to avoid them. Understand
>>>>>>> malware threats, the impact they can have on your business, and how you
>>>>>>> can protect your company and customers by using code signing.
>>>>>>> http://p.sf.net/sfu/oracle-sfdevnl
>>>>>>> _______________________________________________
>>>>>>> Logicmail-devel mailing list
>>>>>>> Log...@li...
>>>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel
>>>>>>
>>>>>
>>>>>
>>>>>
>>> -----------------------------------------------------------------------------
>>>>>
>>> -
>>>>> Protect Your Site and Customers from Malware Attacks
>>>>> Learn about various malware tactics and how to avoid them. Understand
>>>>> malware threats, the impact they can have on your business, and how you
>>>>> can protect your company and customers by using code signing.
>>>>> http://p.sf.net/sfu/oracle-sfdevnl
>>>>> _______________________________________________
>>>>> Logicmail-devel mailing list
>>>>> Log...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel
>>>>
>>>
>>>
>>>
> ----------------------------------------------------------------------------->>
> -
>>> Protect Your Site and Customers from Malware Attacks
>>> Learn about various malware tactics and how to avoid them. Understand
>>> malware threats, the impact they can have on your business, and how you
>>> can protect your company and customers by using code signing.
>>> http://p.sf.net/sfu/oracle-sfdevnl
>>> _______________________________________________
>>> Logicmail-devel mailing list
>>> Log...@li...
>>> https://lists.sourceforge.net/lists/listinfo/logicmail-devel
>>
>
>
> ------------------------------------------------------------------------------
> Protect Your Site and Customers from Malware Attacks
> Learn about various malware tactics and how to avoid them. Understand
> malware threats, the impact they can have on your business, and how you
> can protect your company and customers by using code signing.
> http://p.sf.net/sfu/oracle-sfdevnl
> _______________________________________________
> Logicmail-devel mailing list
> Log...@li...
> https://lists.sourceforge.net/lists/listinfo/logicmail-devel


-- 
----------------------------
  Derek Konigsberg
  dko...@lo...
----------------------------