Thread: Re: [Logicmail-users] 1.2.213 errors
Brought to you by:
octorian
Menu
▾
▴
logicmail-users
|
From: Peter P. <plp...@ya...> - 2010-10-15 15:21:20
|
I upgraded LogicMail to 1.2.213 and I get the following error on Pop mailbox access:
if the password is NOT set for POP in the Config, I am prompted for it,
enter it (upper and lowercase and digits, no special characters, then I
get a "StringOutOfBounds: -1 error".
*nothing* is written into the device log
The text "Closing connection" remains displayed at the bottom and the program is not responsive, only Exit works.
Entering a bad password on purpose yields: the same thing as above the first time, and "Unknown Error" thereafter.
The connection parameters are:
pop, SSL, port 995
One more thing: the password entry field in Account->Basic settings
is not visible (can't scroll down below Userbame:), the cursor
disappears at the bottom ?! I assume this is a bug in the GUI somehow.
Sending messages works fine (also SSL, same identity).
-- Peter
|
|
From: Peter P. <plp...@ya...> - 2010-10-15 15:38:09
|
Update: I made a mistake when reading the log. The log is not empty, I forgot to refresh it. Here are new infos
1. re: the invisible password line in Account->Basic settings: This only happens when a long server name is used and it uses 2 lines under 'Server:'. This pushes the form bottom down and the Password field disappears. Workaround: enter the server name last, after entering the Password, if used
2. re: behavior problem:
2.1 password filled in: error box "String index out of range: -1", first time, every next time I di Refresh Status, I get "Unknown error"; log shows:
S Java Exception - NullPointerException - 10/15 18:31:27
| No detail message
| LogicMail-2
| PopClient
| close
| 0xB9A2
| LogicMail-1
| AbstractMailConnectionHandler
| handleClosingConnection
| 0x611
| LogicMail-1
| AbstractMailConnectionHandler$ConnectionThread
| run
| 0xB29
E LogicMail - java.lang.NullPointerException - 10/15 18:31:27
S Java Exception - NullPointerException - 10/15 18:31:27
| No detail message
| LogicMail-4
| Connection
| sendCommand
| 0x633
| LogicMail-2
| PopProtocol
| <private>
| 0xC416
| LogicMail-2
| PopProtocol
| <private>
| 0xC377
| LogicMail-2
| PopProtocol
| executeCapa
| 0xBF92
| LogicMail-2
| PopClient
| open
| 0xB8F7
| LogicMail-1
| AbstractMailConnectionHandler
| handleOpeningConnection
| 0x405
| LogicMail-1
| AbstractMailConnectionHandler$ConnectionThread
| run
| 0xB09
a net.rim.tcp - clos - 10/15 18:30:50
E LogicMail - java.lang.StringIndexOutOfBoundsException: String index out of range: -1 - 10/15 18:30:49
S Java Exception - StringIndexOutOfBoundsException - 10/15 18:30:49
| String index out of range: -1
| net_rim_cldc
| String
| substring
| 0xA351
| LogicMail-2
| PopProtocol
| executeStat
| 0xC194
| LogicMail-2
| PopClient
| open
| 0xB97C
| LogicMail-1
| AbstractMailConnectionHandler
| handleOpeningConnection
| 0x405
| LogicMail-1
| AbstractMailConnectionHandler$ConnectionThread
| run
| 0xB09
|
|
From: Derek K. <dko...@lo...> - 2010-10-15 15:31:41
|
Are you using a language other than English? If so, there are GUI bugs that affect field layout on the config screen. They're on my to-do list to fix. I'll investigate the other issue. -Derek On 10/15/2010 11:21 AM, Peter P. wrote: > I upgraded LogicMail to 1.2.213 and I get the following error on Pop > mailbox access: > > if the password is NOT set for POP in the Config, I am prompted for > it, enter it (upper and lowercase and digits, no special characters, > then I get a "StringOutOfBounds: -1 error". > > *nothing* is written into the device log > The text "Closing connection" remains displayed at the bottom and the > program is not responsive, only Exit works. > > Entering a bad password on purpose yields: the same thing as above the > first time, and "Unknown Error" thereafter. > > The connection parameters are: > > pop, SSL, port 995 > > One more thing: the password entry field in Account->Basic settings is > not visible (can't scroll down below Userbame:), the cursor disappears > at the bottom ?! I assume this is a bug in the GUI somehow. Sending > messages works fine (also SSL, same identity). > > -- Peter > > > > > > ------------------------------------------------------------------------------ > Download new Adobe(R) Flash(R) Builder(TM) 4 > The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly > Flex(R) Builder(TM)) enable the development of rich applications that run > across multiple browsers and platforms. Download your free trials today! > http://p.sf.net/sfu/adobe-dev2dev > > > _______________________________________________ > Logicmail-users mailing list > Log...@li... > https://lists.sourceforge.net/lists/listinfo/logicmail-users -- ---------------------------- Derek Konigsberg dko...@lo... ---------------------------- |
|
From: Peter P. <plp...@ya...> - 2010-10-15 15:40:04
|
I am not using any non-English character sets excepting for the fact that foreign languages are installed by default in BB (German Umlauts and the like). NO foreign characters were used anywhere in LogicMail so far (password, account names, user ids etc)
Please see also my other email, with more detail. It does not look like a problem in the character set to me, it is much deeper. FWIW the mail server is the one used by godaddy accounts.
-- Peter
--- On Fri, 10/15/10, Derek Konigsberg <dko...@lo...> wrote:
From: Derek Konigsberg <dko...@lo...>
Subject: Re: [Logicmail-users] 1.2.213 errors
To: log...@li...
Date: Friday, October 15, 2010, 11:31 AM
Are you using a language other than English? If so, there are GUI
bugs that affect field layout on the config screen. They're on my
to-do list to fix.
I'll investigate the other issue.
-Derek
On 10/15/2010 11:21 AM, Peter P. wrote:
I upgraded LogicMail
to 1.2.213 and I get the following error on Pop mailbox
access:
if the password is NOT set for POP in the Config, I am
prompted for it,
enter it (upper and lowercase and digits, no special
characters, then I
get a "StringOutOfBounds: -1 error".
*nothing* is written into the device log
The text "Closing connection" remains displayed at the
bottom and the program is not responsive, only Exit works.
Entering a bad password on purpose yields: the same thing
as above the first time, and "Unknown Error" thereafter.
The connection parameters are:
pop, SSL, port 995
One more thing: the password entry field in
Account->Basic settings
is not visible (can't scroll down below Userbame:), the
cursor
disappears at the bottom ?! I assume this is a bug in the
GUI somehow.
Sending messages works fine (also SSL, same identity).
-- Peter
------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
_______________________________________________
Logicmail-users mailing list
Log...@li...
https://lists.sourceforge.net/lists/listinfo/logicmail-users
--
----------------------------
Derek Konigsberg
dko...@lo...
----------------------------
-----Inline Attachment Follows-----
------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
-----Inline Attachment Follows-----
_______________________________________________
Logicmail-users mailing list
Log...@li...
https://lists.sourceforge.net/lists/listinfo/logicmail-users
|
|
From: <jer...@at...> - 2010-10-15 15:42:12
|
How do I unsubscribe to this email list. I no longer require logicmail. Thank you. Jeremy Sent via BlackBerry by AT&T -----Original Message----- From: "Peter P." <plp...@ya...> Date: Fri, 15 Oct 2010 08:39:55 To: <log...@li...> Reply-To: log...@li... Subject: Re: [Logicmail-users] 1.2.213 errors ------------------------------------------------------------------------------ Download new Adobe(R) Flash(R) Builder(TM) 4 The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly Flex(R) Builder(TM)) enable the development of rich applications that run across multiple browsers and platforms. Download your free trials today! http://p.sf.net/sfu/adobe-dev2dev |
|
From: tat u. <ta...@gm...> - 2010-10-16 17:26:09
|
This is an opportunity for me to ask the same question. I've visited the subscription page a couple of times over the last month or so, and have been wondering if it takes a while for the request to be applied. Or whether I've forgotten which account I registered with... On 15/10/2010 16:41, jer...@at... wrote: > How do I unsubscribe to this email list. I no longer require logicmail. > > Thank you. > > Jeremy > Sent via BlackBerry by AT&T |
|
From: Derek K. <dko...@lo...> - 2010-10-15 15:52:10
|
I think the non-English layout issue is really the same thing as the multi-line issue you're running into. I need to fix it, and will look into it shortly. The POP login issue actually looks like something that happens after you authenticate (from the log you showed me), but its hard to know without testing myself. Is there any way you can give me temporary access to a test account that I can reproduce this issue myself on? (if so, please e-mail me privately with login info) -Derek On 10/15/2010 11:39 AM, Peter P. wrote: > I am not using any non-English character sets excepting for the fact > that foreign languages are installed by default in BB (German Umlauts > and the like). NO foreign characters were used anywhere in LogicMail > so far (password, account names, user ids etc) > > Please see also my other email, with more detail. It does not look > like a problem in the character set to me, it is much deeper. FWIW the > mail server is the one used by godaddy accounts. > > -- Peter > > --- On *Fri, 10/15/10, Derek Konigsberg > /<dko...@lo...>/* wrote: > > > From: Derek Konigsberg <dko...@lo...> > Subject: Re: [Logicmail-users] 1.2.213 errors > To: log...@li... > Date: Friday, October 15, 2010, 11:31 AM > > Are you using a language other than English? If so, there are GUI > bugs that affect field layout on the config screen. They're on my > to-do list to fix. > > I'll investigate the other issue. > > -Derek > > On 10/15/2010 11:21 AM, Peter P. wrote: >> I upgraded LogicMail to 1.2.213 and I get the following error on >> Pop mailbox access: >> >> if the password is NOT set for POP in the Config, I am prompted >> for it, enter it (upper and lowercase and digits, no special >> characters, then I get a "StringOutOfBounds: -1 error". >> >> *nothing* is written into the device log >> The text "Closing connection" remains displayed at the bottom and >> the program is not responsive, only Exit works. >> >> Entering a bad password on purpose yields: the same thing as >> above the first time, and "Unknown Error" thereafter. >> >> The connection parameters are: >> >> pop, SSL, port 995 >> >> One more thing: the password entry field in Account->Basic >> settings is not visible (can't scroll down below Userbame:), the >> cursor disappears at the bottom ?! I assume this is a bug in the >> GUI somehow. Sending messages works fine (also SSL, same identity). >> >> -- Peter >> >> >> >> >> >> ------------------------------------------------------------------------------ >> Download new Adobe(R) Flash(R) Builder(TM) 4 >> The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly >> Flex(R) Builder(TM)) enable the development of rich applications that run >> across multiple browsers and platforms. Download your free trials today! >> http://p.sf.net/sfu/adobe-dev2dev >> >> >> _______________________________________________ >> Logicmail-users mailing list >> Log...@li... </mc/compose?to=Log...@li...> >> https://lists.sourceforge.net/lists/listinfo/logicmail-users > > > -- > ---------------------------- > Derek Konigsberg > dko...@lo... </mc/compose?to=dko...@lo...> > ---------------------------- > > > -----Inline Attachment Follows----- > > ------------------------------------------------------------------------------ > Download new Adobe(R) Flash(R) Builder(TM) 4 > The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly > Flex(R) Builder(TM)) enable the development of rich applications > that run > across multiple browsers and platforms. Download your free trials > today! > http://p.sf.net/sfu/adobe-dev2dev > > -----Inline Attachment Follows----- > > _______________________________________________ > Logicmail-users mailing list > Log...@li... > </mc/compose?to=Log...@li...> > https://lists.sourceforge.net/lists/listinfo/logicmail-users > > > > ------------------------------------------------------------------------------ > Download new Adobe(R) Flash(R) Builder(TM) 4 > The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly > Flex(R) Builder(TM)) enable the development of rich applications that run > across multiple browsers and platforms. Download your free trials today! > http://p.sf.net/sfu/adobe-dev2dev > > > _______________________________________________ > Logicmail-users mailing list > Log...@li... > https://lists.sourceforge.net/lists/listinfo/logicmail-users -- ---------------------------- Derek Konigsberg dko...@lo... ---------------------------- |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X