Re: [Lmuse-user] MusE 0.9pre1 - Pbm with midi cc

[. <intent@ne...>]

On Tuesday 28 November 2006 16:56, rj@... wrote:

> Oh, experimental synth? hardware or software? :)
>
Softardware :) It's a hybrid digital/analog system using LADSPA oscillators 
from the CAPS suite for the "vco", the modulators (lfo/env) are made with 
PureData then send thru a DIY hispeed digital->CV convertor (32 channels) to 
modulate a bunch of *real* analog VCF and VCA. I have cloned various famous 
VCF (Moog/SEM/KorgMS20/Synthacon). :))

Then all this is aquired by a Terratec EW88mt using ardour and MusE.

> > But i think this report may interest u :)
>
> Yes it does.
> The change you mention below is I think the only change made that could
> affect this... not entirely sure what is going on. If you have more info
> please send it.
>
I will, i observed a curious behaviour like each time the loop started again 
it changed the value of a midi controller :)

Now, it seems to work ok but all the "controller" parts have been moved to bar 
2. Tomorrow will be another day :)

Cheers,

NR

Re: [Lmuse-user] MusE 0.9pre1 - Pbm with midi cc

[<rj@sp...>]

Hello,

. skrev:
> Hello,
>
> I am testing Muse 0.9pre1 on my gentoo 2006.1 (gcc4.1) and i am facing some 
> problems with MIDI control changes. 
>
> As far as i remember the previous release (Muse 0.8.1) was a little better in 
> this regard.
>
> I have my own .idf file for an experimental synth i have built and I enter 
> midi parameters that define a patch in a part at the begining of a track.
>   
Oh, experimental synth? hardware or software? :)
> The problem for now is that positionning theses parts at the very begining of 
> the track seems to pose problem. The values (mere 7bit control changes) are 
> not initialised properly and after that even if u put the part a little after 
> the begining, editing the values doesn't seem always (if ever) to be taken in 
> account.
>
> I am a little puzzled with the current behaviour still trying to understand 
> what is going wrong.
>
> But i think this report may interest u :) 
>   
Yes it does.
The change you mention below is I think the only change made that could 
affect this... not entirely sure what is going on. If you have more info 
please send it.

Regards,
Robert
> I will post further observations if i find any repeatable pattern. I know that 
> there has been a bug fix related to control change in the new release, i'm 
> afraid something new has crept in.
>
> I am refering to this:
> * Fixed issue with playing of controllers when moving playhead, bug #1316542
> (bug that i entered btw, very happy that it has been fixed)
>
> Thanks for this new release and for the continuous care u put in this project. 
>
> Cheers,
>
> NR
>
>
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user
>   

[Lmuse-user] MusE 0.9pre1 - Pbm with midi cc

[. <intent@ne...>]

Hello,

I am testing Muse 0.9pre1 on my gentoo 2006.1 (gcc4.1) and i am facing some 
problems with MIDI control changes. 

As far as i remember the previous release (Muse 0.8.1) was a little better in 
this regard.

I have my own .idf file for an experimental synth i have built and I enter 
midi parameters that define a patch in a part at the begining of a track.

The problem for now is that positionning theses parts at the very begining of 
the track seems to pose problem. The values (mere 7bit control changes) are 
not initialised properly and after that even if u put the part a little after 
the begining, editing the values doesn't seem always (if ever) to be taken in 
account.

I am a little puzzled with the current behaviour still trying to understand 
what is going wrong.

But i think this report may interest u :) 

I will post further observations if i find any repeatable pattern. I know that 
there has been a bug fix related to control change in the new release, i'm 
afraid something new has crept in.

I am refering to this:
* Fixed issue with playing of controllers when moving playhead, bug #1316542
(bug that i entered btw, very happy that it has been fixed)

Thanks for this new release and for the continuous care u put in this project. 

Cheers,

NR

[Lmuse-user] need some nice screenshots of 0.9

[Joachim Schiele <js@la...>]

Hello MusE-community,

in order to update the webpage to make it more fancy I need some nice 
screenshots of MusE 0.9 (0.8 would also be ok, because most gui stuff didn't 
change.

Please keep in mind when doing a screenshot:
- plastic theme (kde) is prefered
- no other applications on the desktop (like xmms in the current screenshot)
- no kicker (taskbar, with icons and ...)
- nice arrangements
- and all the other things you think is cool

Please submit your favourite screenshots to js add lastlog dodd de. Every mail 
is welcome.

If you have a designer skill, you can also cut all non-widget stuff in the 
thumbnail image, that will give us a nice look'n'feel, example see [1]. This 
looks very good in a floating text as in [2] and will help to focus on the 
main task: MusE, not the desktop, not qjackctl nor anything else!

Have a nice day,
Joachim

[1] http://doc.trolltech.com/4.2/images/plastique-fontcombobox-open.png
[2] http://doc.trolltech.com/4.2/qt4-2-intro.html

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

On Sat, Nov 11, 2006 at 01:21:28PM +0100, Robert Jonsson wrote:

> > (http://www.archive.org/details/five-three)
> 
> Listened to it, probably a bit to abstract for me.

Heh, it's a bit abstract for me, too :)


 
> Which reminds me, I tried the other song you sent. (In the eventuall 
> possibility of doing some guitars to it). 
> But... well, really, you have to give some musical clue as to what you were 
> aiming for, any references?
> Basically the tune is quite nice I can't imagine this as a guitar based 
> tune :-D, Especielly after listening to the one I lifted into muse and 
> quickly set up an ensemble for (using a gm font), my mind wandered to old c64 
> songs, oh the joy, 

It should rock, have speed and roughness from punk, make people jump :)
Maybe Ska, but I don't know these genres so well.

For the beat, I have some kind of electro-punk in mind.

I have a cassette with german punk music from a girl that was into 
it ... I was curious ;)
Most of it with much too bad singers to be enjoyable and band names 
like Schleimkeim which won't help you anyway :)

Maybe Freeyourself could be a reference (not from that cassette).
http://www.freeyourself.de/G_s/FreeYourself.htm
The singer Dimi was a fellow student. Used to have examples 
on their page, no more, too bad.

C64 hmmm ... perhaps check Neskimos ad Celdweller, if you havn't 
already :)


> > But I noticed the aux knobs say 'off' when turned
> > all up ...
> 
> Fixed that
> 
> >
> > Onl 2 other issues I stumbled in this session. I think
> > both are already reported:
> > - Scrolling per mouse wheel only works with mouse over
> > the track canvas, not over the table.
> 
> Fixed that

Great job :)


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Robert Jonsson <rj@sp...>]

On Monday 06 November 2006 20:50, Thorsten Wilms wrote:
> So I just finished my piece and announced it on the lad
> list. (http://www.archive.org/details/five-three)

Listened to it, probably a bit to abstract for me.

Which reminds me, I tried the other song you sent. (In the eventuall 
possibility of doing some guitars to it). 
But... well, really, you have to give some musical clue as to what you were 
aiming for, any references?
Basically the tune is quite nice I can't imagine this as a guitar based 
tune :-D, Especielly after listening to the one I lifted into muse and 
quickly set up an ensemble for (using a gm font), my mind wandered to old c64 
songs, oh the joy, 

>
> Aux working with stereo now makes mixing much faster,
> no more creating lots of groups to use them as sends :)

great! :)

>
> But I noticed the aux knobs say 'off' when turned
> all up ...

Fixed that

>
> Onl 2 other issues I stumbled in this session. I think
> both are already reported:
> - Scrolling per mouse wheel only works with mouse over
> the track canvas, not over the table.

Fixed that

> - After importing a long wav in a new song, the length
> is not extended automaticaly. So play will just there
> stop, leaving the user wondering WTF? ;)

Not fixed yet. I think I looked at this previously and it was much harder to 
fix than I thought... don't remember why though, will take another look.

/Robert
>
> I didn't move much stuff ad edited no midi at all for
> now, though.
>
>
> --
> Thorsten Wilms
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

-- 
http://spamatica.se/musicsite/

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

On Thu, Nov 09, 2006 at 10:33:11AM +0100, Thorsten Wilms wrote:
> 
> It's not the first time I ran into this problem.
> Will try to reproduce with as few steps as possible myself.

Wasn't able to reproduce it.
Perhaps it was some kind of leftover from the older MusE.


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

On Thu, Nov 09, 2006 at 10:27:06AM +0100, rj@... wrote:
> >
> > Maybe renaming the output? I'm rather sure I did that prior to 
> > adding additional outputs.
> >   
> I tried that and it worked for me anyway, I'll try to investigate some more.

The only other thing is reordering the outputs and other items.
Can't think of yet another way of manipulation.

It's not the first time I ran into this problem.
Will try to reproduce with as few steps as possible myself.


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[<rj@sp...>]

Thorsten Wilms skrev:
> On Wed, Nov 08, 2006 at 11:10:35PM +0100, Robert Jonsson wrote:
>   
>> This seems related, can't reproduce this either.
>> I'm not saying it is impossible, the mixdown solution is not very elegant, you 
>> cannot select what to mixdown etc..
>> Could it have been some other move that caused it to happen? Removing the 
>> original output will probably cause havoc.
>>     
>
> Maybe renaming the output? I'm rather sure I did that prior to 
> adding additional outputs.
>   
I tried that and it worked for me anyway, I'll try to investigate some more.

/Robert

>
> --
> Thorsten Wilms
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user
>   

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

On Wed, Nov 08, 2006 at 11:10:35PM +0100, Robert Jonsson wrote:
> 
> This seems related, can't reproduce this either.
> I'm not saying it is impossible, the mixdown solution is not very elegant, you 
> cannot select what to mixdown etc..
> Could it have been some other move that caused it to happen? Removing the 
> original output will probably cause havoc.

Maybe renaming the output? I'm rather sure I did that prior to 
adding additional outputs.


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Robert Jonsson <rj@sp...>]

Ho,

On Monday 06 November 2006 12:42, Thorsten Wilms wrote:
> Hi!
>
> 3 related problems so far: muting MASTER is ignored, I had
> to pull down the gain as workaround.

Think I have fixed that now.

>
> After adding another output, new wave-tracks
> get auto-connected to that instead MASTER.

Hmmm, I cannot seem to reproduce this
>
> Bouncing also uses the new output, not MASTER. Perhaps
> bouncing should look for rec enabled outputs?

This seems related, can't reproduce this either.
I'm not saying it is impossible, the mixdown solution is not very elegant, you 
cannot select what to mixdown etc..
Could it have been some other move that caused it to happen? Removing the 
original output will probably cause havoc.

Regards,
Robert

>
> Anyway, looks like there's some kind of master flag that is
> moved to new outputs but shouldn't. And I see no UI means
> to change it.
>
>
> --
> Thorsten Wilms
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

-- 
http://spamatica.se/musicsite/

Re: [Lmuse-user] undefined symbol: _ZN14QStackedWidget5eventEP6QEvent

[Robert Jonsson <rj@sp...>]

Hi,

> My apologies, flux.  I see in reviewing my post I didn't make it clear
> that I had installed a SuSE *package* from Pacman.
>
> When I tried to compile MusE myself, there was a dependancy issue with
> qt3 that was going to remove hplip.  Since this is my main printing
> package, I stopped and did not continue with the compile.
>
> Should I have asked this question to Packman?

Yes, it is likely a problem with the build of the rpm. Possibly qt has been 
updated after muse and an incompatibility has been introduced.

Regards,
Robert

> The Other.
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

-- 
http://spamatica.se/musicsite/

Re: [Lmuse-user] undefined symbol: _ZN14QStackedWidget5eventEP6QEvent

[The Other <sstubbs@sh...>]

On Tuesday 07 November 2006 2:39 am, Joachim Schiele wrote:
> On Monday 06 November 2006 18:56, The Other wrote:
> > Nov 6 2006
> >
> > Hello All,
> >
> > On:
> >  Open SuSE   10.0
> >  MusE-seq   1.0pre1-0.pm.svn20061003@...    from the Packman
> > repository for SuSE 10.0
> >  Jack is running
> >
> > >From a terminal:
> >
> > 1)  muse <cr>
> > 2)  muse -m <cr>
> > 3)  muse -p <cr>
> > 4)  muse -d <cr>
> >
> > all produce the same result:
> >
> > 1)  I get the opening picture of the harp
> >
> > 2)  I get:  muse: undefined symbol:
> > _ZN14QStackedWidget5eventEP6QEvent
> >
> > 3)  returned to the command line prompt.  No MusE.
> >
> > Any ideas what is wrong?
>
> hi
>
> MusE was linked against a different library so running MusE reports
> undefined symbols. Can you send us the output of:
> 	ldd muse
> And also:
> 	dpkg -l | grep qt
>
> \flux

My apologies, flux.  I see in reviewing my post I didn't make it clear 
that I had installed a SuSE *package* from Pacman.

When I tried to compile MusE myself, there was a dependancy issue with 
qt3 that was going to remove hplip.  Since this is my main printing 
package, I stopped and did not continue with the compile.

Should I have asked this question to Packman?
The Other.

Re: [Lmuse-user] undefined symbol: _ZN14QStackedWidget5eventEP6QEvent

[Joachim Schiele <js@la...>]

On Monday 06 November 2006 18:56, The Other wrote:
> Nov 6 2006
>
> Hello All,
>
> On:
>  Open SuSE   10.0
>  MusE-seq   1.0pre1-0.pm.svn20061003@...    from the Packman
> repository for SuSE 10.0
>  Jack is running
>
> >From a terminal:
>
> 1)  muse <cr>
> 2)  muse -m <cr>
> 3)  muse -p <cr>
> 4)  muse -d <cr>
>
> all produce the same result:
>
> 1)  I get the opening picture of the harp
>
> 2)  I get:  muse: undefined symbol: _ZN14QStackedWidget5eventEP6QEvent
>
> 3)  returned to the command line prompt.  No MusE.
>
> Any ideas what is wrong?
hi

MusE was linked against a different library so running MusE reports undefined 
symbols. Can you send us the output of:
	ldd muse
And also:
	dpkg -l | grep qt

\flux

> Thanks,
> "The Other" Stephen Stubbs
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

So I just finished my piece and announced it on the lad 
list. (http://www.archive.org/details/five-three)

Aux working with stereo now makes mixing much faster, 
no more creating lots of groups to use them as sends :)

But I noticed the aux knobs say 'off' when turned 
all up ...

Onl 2 other issues I stumbled in this session. I think 
both are already reported:
- Scrolling per mouse wheel only works with mouse over 
the track canvas, not over the table.
- After importing a long wav in a new song, the length 
is not extended automaticaly. So play will just there 
stop, leaving the user wondering WTF? ;)

I didn't move much stuff ad edited no midi at all for 
now, though.


--
Thorsten Wilms

[Lmuse-user] undefined symbol: _ZN14QStackedWidget5eventEP6QEvent

[The Other <sstubbs@sh...>]

Nov 6 2006

Hello All,

On:
 Open SuSE   10.0=20
 MusE-seq   1.0pre1-0.pm.svn20061003@...    from the Packman=20
repository for SuSE 10.0
 Jack is running

=46rom a terminal:

1)  muse <cr>
2)  muse -m <cr>
3)  muse -p <cr>
4)  muse -d <cr>

all produce the same result:

1)  I get the opening picture of the harp

2)  I get:  muse: undefined symbol: _ZN14QStackedWidget5eventEP6QEvent

3)  returned to the command line prompt.  No MusE.

Any ideas what is wrong?

Thanks,
"The Other" Stephen Stubbs

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

Hi!

3 related problems so far: muting MASTER is ignored, I had 
to pull down the gain as workaround.

After adding another output, new wave-tracks 
get auto-connected to that instead MASTER.

Bouncing also uses the new output, not MASTER. Perhaps 
bouncing should look for rec enabled outputs?

Anyway, looks like there's some kind of master flag that is 
moved to new outputs but shouldn't. And I see no UI means 
to change it.


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Robert Jonsson <rj@sp...>]

On Sunday 05 November 2006 20:41, Thorsten Wilms wrote:
> On Sat, Nov 04, 2006 at 11:37:43PM +0100, Robert Jonsson wrote:
> > Hello everybody,
> >
> > This is the first prerelease of MusE 0.9.
>
> Great work!
> Too bad auto-scrolling works on rubber-banding only,
> not while dragiing a part.

Now you're making me feel stupid ...hrmpf.
;) It actually never occured to me.

I changed it so it works for (hopefully) all drag operations, checked into 
cvs.

> I just switched to this to finish my latest track, will
> report possible problems (I have a backup, of course.
> several, actualy :)

Please do!

/Robert

>
>
> --
> Thorsten Wilms
>
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

-- 
http://spamatica.se/musicsite/

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Thorsten Wilms <t_w_@fr...>]

On Sat, Nov 04, 2006 at 11:37:43PM +0100, Robert Jonsson wrote:
> Hello everybody,
> 
> This is the first prerelease of MusE 0.9.


Great work!
Too bad auto-scrolling works on rubber-banding only, 
not while dragiing a part.

I just switched to this to finish my latest track, will 
report possible problems (I have a backup, of course. 
several, actualy :)


--
Thorsten Wilms

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[Geoff Beasley <songshop@bi...>]

great to see my favourite sequencer is still deveoping ;)

i'll install in the morning.

thank-you.

g.

Re: [Lmuse-user] [Announce] MusE 0.9pre1

[<linux_chaos@ya...>]

hello,

great - thanks for the next version ;-)

compiles without any prolems on debian (etch) and works fine for the
first testing. i will write again, if i find bugs...

greetings l.chaos


Robert Jonsson wrote:
> Hello everybody,
>
> This is the first prerelease of MusE 0.9.
>
> The main feature improvement in 0.9 is the addition of plugin automation as 
> well as fixes to the already present automation features (they actually work 
> now). There is no graphical automation editor as will be present in 1.0, all 
> automatable parameters do however have a right click menu as a working 
> replacement. 
> There is usage information concerning automation embedded in the ChangeLog so 
> be sure to read the relevant parts. There are also a bunch of other fixes and 
> improvements, check the ChangeLog for a complete list. 
>
> For those about to R^Dtest, be sure to report your findings here or 
> (preferably) file a bug report on the tracker 
> (http://sourceforge.net/tracker/?group_id=93414).
> There are known bugs (see tracker), some of which we still are trying to fix, 
> we do however want your feedback as to all unknown issues.
>
> Excerpt from the ChangeLog:
> * Adopted RT locking method from 1.0 branch.
> * Fixed old bug - DoubleLabel right click causes popup and runaway increment.
> * Changing global tempo now updates things. (Like resizing wave tracks).
> * Fixed ladspa plugin automation not working until plugin displayed.
> * Select right item when stacked on top of each other, for p-roll and arranger
> * Apply effect rack before sending aux
> * Auto assign internal softsynths upon creation
> * New method for pasting parts, keep original spacing, fixes bug #1516294
> * Muting of midi-tracks no longer mute input, bug #1092343
> * Fixed issue with playing of controllers when moving playhead, bug #1316542
> * Cached peak files now updated when wave files are more recent, bug #1469177
> * Fixed bug with recording notes to existing part, bug #1552783
> * MusE now asks when imported wave file has differing samplerate, bug #1428248
> * Fix for pianoroll selection of events in/outside loop with respect to offset
> * Added rubberband scrolling in arranger, drumedit and pianoroll, bug #1057732
> * Changed colours of audio-out and wave strip names to match icon colours
> * Fixed aux sending
> * Fix logarithmic feedback to plugin sliders
> * Fixed multiple part undo for move,drag and copy in arranger, bug #1516298
> * Fixed multiple note undo for move and drag in pianoroll
> * Fixed cursor placement in List Editor upon deleting events bug #1417718
> * Fixed soloing. Also multiple soloing now allowed.
> * Enabled solo buttons on the mixer strips.
> * Fixed major issues with rack plugin moving, saving and loading.
> * Fixed problems with multiple tempo changes and incorrect wave part lengths.
> * Changed plugin code to use double instead of float to stop certain errors
> * Fixed some minor spelling mistakes.
> * Fixed issues with audio track automation.
> * Fixed very 'jumpy' volume sliders and pan knobs under automation.
> * Fixed several other small problems. For example a duplicate define in song.h
> * Changed the way audio track automation works.
> * Full LADSPA plugin automation.
> * fluidsynth: fixed pitchbend events, fixes bug #1404212
> * Editing volume and pan with keyboard on audio strip now works
> * Fixed issue with recording audio, fifo could overflow with small jack sizes
> * fixed storing of files with relative path when "under" the project path
>
> Full ChangeLog:
> http://lmuse.cvs.sourceforge.net/lmuse/muse/ChangeLog?revision=1.214.2.175
>
> Regards,
> /MusE Development team
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user
>
>   


-- 
_________________________________________________________________
http://www.audio4linux.de - musikmachen mit offenen quellen

[Lmuse-user] [Announce] MusE 0.9pre1

[Robert Jonsson <rj@sp...>]

Hello everybody,

This is the first prerelease of MusE 0.9.

The main feature improvement in 0.9 is the addition of plugin automation as 
well as fixes to the already present automation features (they actually work 
now). There is no graphical automation editor as will be present in 1.0, all 
automatable parameters do however have a right click menu as a working 
replacement. 
There is usage information concerning automation embedded in the ChangeLog so 
be sure to read the relevant parts. There are also a bunch of other fixes and 
improvements, check the ChangeLog for a complete list. 

For those about to R^Dtest, be sure to report your findings here or 
(preferably) file a bug report on the tracker 
(http://sourceforge.net/tracker/?group_id=93414).
There are known bugs (see tracker), some of which we still are trying to fix, 
we do however want your feedback as to all unknown issues.

Excerpt from the ChangeLog:
* Adopted RT locking method from 1.0 branch.
* Fixed old bug - DoubleLabel right click causes popup and runaway increment.
* Changing global tempo now updates things. (Like resizing wave tracks).
* Fixed ladspa plugin automation not working until plugin displayed.
* Select right item when stacked on top of each other, for p-roll and arranger
* Apply effect rack before sending aux
* Auto assign internal softsynths upon creation
* New method for pasting parts, keep original spacing, fixes bug #1516294
* Muting of midi-tracks no longer mute input, bug #1092343
* Fixed issue with playing of controllers when moving playhead, bug #1316542
* Cached peak files now updated when wave files are more recent, bug #1469177
* Fixed bug with recording notes to existing part, bug #1552783
* MusE now asks when imported wave file has differing samplerate, bug #1428248
* Fix for pianoroll selection of events in/outside loop with respect to offset
* Added rubberband scrolling in arranger, drumedit and pianoroll, bug #1057732
* Changed colours of audio-out and wave strip names to match icon colours
* Fixed aux sending
* Fix logarithmic feedback to plugin sliders
* Fixed multiple part undo for move,drag and copy in arranger, bug #1516298
* Fixed multiple note undo for move and drag in pianoroll
* Fixed cursor placement in List Editor upon deleting events bug #1417718
* Fixed soloing. Also multiple soloing now allowed.
* Enabled solo buttons on the mixer strips.
* Fixed major issues with rack plugin moving, saving and loading.
* Fixed problems with multiple tempo changes and incorrect wave part lengths.
* Changed plugin code to use double instead of float to stop certain errors
* Fixed some minor spelling mistakes.
* Fixed issues with audio track automation.
* Fixed very 'jumpy' volume sliders and pan knobs under automation.
* Fixed several other small problems. For example a duplicate define in song.h
* Changed the way audio track automation works.
* Full LADSPA plugin automation.
* fluidsynth: fixed pitchbend events, fixes bug #1404212
* Editing volume and pan with keyboard on audio strip now works
* Fixed issue with recording audio, fifo could overflow with small jack sizes
* fixed storing of files with relative path when "under" the project path

Full ChangeLog:
http://lmuse.cvs.sourceforge.net/lmuse/muse/ChangeLog?revision=1.214.2.175

Regards,
/MusE Development team

Re: [Lmuse-user] 0.8.1 can't compile today.....

[europeen <karlkawada@wa...>]

Le jeudi 02 novembre 2006 =C3=A0 12:50 +0100, Robert Jonsson a =C3=A9crit=
 :
> I don't think that will help... s1 contains very little code, not much =
can go=20
> wrong.
>=20
> Looking at the error for a while I see the problem seems to be a broken=
 path,=20
> that actually breaks before the muse directory.
>=20
> I notice the "fr=C3=A9quente" directory name, it's possible that the ar=
 tool can't=20
> handle the =C3=A9.  Swedish characters =C3=A5=C3=A4=C3=B6 frequently ca=
use such problems...
>=20
> Regards,
> Robert
>=20


But you are Merlin The Magician !!!!! It works. I am going to do a
present to my athlon processor now.

Stan.

Re: [Lmuse-user] 0.8.1 can't compile today.....

[Robert Jonsson <rj@sp...>]

Hi,

<...>
> > (cd .libs/s1.lax/libsynti.a && ar
> > x /home/kawada/000_go_stockage/XLinux/00_Compilation
> > fr=C3=A9quente/muse/synti/s1/../libsynti/.libs/libsynti.a)
> > ar: /home/kawada/000_go_stockage/XLinux/00_Compilation: No such file or
> > directory
> > make[5]: *** [s1.la] Erreur 9
> >
> > :-( ouinnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn! What is the solution ????
> >
> > Stan.
>
> you might be able to leave the s1 support (that's a software synth)
> comment it somewhere in a Makefile or maybe there is also a ./configure
> toogle.

I don't think that will help... s1 contains very little code, not much can =
go=20
wrong.

Looking at the error for a while I see the problem seems to be a broken pat=
h,=20
that actually breaks before the muse directory.

I notice the "fr=C3=A9quente" directory name, it's possible that the ar too=
l can't=20
handle the =C3=A9.  Swedish characters =C3=A5=C3=A4=C3=B6 frequently cause =
such problems...

Regards,
Robert


>
> hope that helps
>
> ps: might be the gcc version i've nerve seen before (at least not used)
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=
=3D121642
> _______________________________________________
> Lmuse-user mailing list
> Lmuse-user@...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user

=2D-=20
http://spamatica.se/musicsite/

Re: [Lmuse-user] 0.8.1 can't compile today.....

[Joachim Schiele <js@la...>]

On Thursday 02 November 2006 00:08, europeen wrote:
> Hi list,
>
> I download the CVS because the 0.8.1 refuse to compil
>
> (cvs -z3 -d:pserver:anonymous@...:/cvsroot/lmuse
> co -rREL07 -P muse)
>
> and the cvs refuse to compile too....
>
> I made a configure with optimize option.
>
> the end of the make :
>
> make[5]: entrant dans le r=C3=A9pertoire
> =C2=AB /home/kawada/000_go_stockage/XLinux/00_Compilation
> fr=C3=A9quente/muse/synti/s1 =C2=BB
> if /bin/sh ../../libtool --tag=3DCXX --mode=3Dcompile g++ -DHAVE_CONFIG_H
> -I. -I. -I../..    -g -fno-exceptions -Wall -W -D_GNU_SOURCE
> -D_REENTRANT   -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT   -I../..
> -I../../muse/widgets -I/usr/share/qt3/include -O3 -fomit-frame-pointer
> -ffast-math -fstrength-reduce -funroll-loops -I.. -I../../synti
> -I../../muse/widgets -DQT_SHARED -DQT_THREAD_SUPPORT -DQT_PLUGIN -g  -MT
> s1.lo -MD -MP -MF ".deps/s1.Tpo" -c -o s1.lo s1.cpp; \
>         then mv -f ".deps/s1.Tpo" ".deps/s1.Plo"; else rm -f
> ".deps/s1.Tpo"; exit 1; fi
> mkdir .libs
>  g++ -DHAVE_CONFIG_H -I. -I. -I../.. -g -fno-exceptions -Wall -W
> -D_GNU_SOURCE -D_REENTRANT -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT -I../..
> -I../../muse/widgets -I/usr/share/qt3/include -O3 -fomit-frame-pointer
> -ffast-math -fstrength-reduce -funroll-loops -I.. -I../../synti
> -I../../muse/widgets -DQT_SHARED -DQT_THREAD_SUPPORT -DQT_PLUGIN -g -MT
> s1.lo -MD -MP -MF .deps/s1.Tpo -c s1.cpp  -fPIC -DPIC -o .libs/s1.o
>  g++ -DHAVE_CONFIG_H -I. -I. -I../.. -g -fno-exceptions -Wall -W
> -D_GNU_SOURCE -D_REENTRANT -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT -I../..
> -I../../muse/widgets -I/usr/share/qt3/include -O3 -fomit-frame-pointer
> -ffast-math -fstrength-reduce -funroll-loops -I.. -I../../synti
> -I../../muse/widgets -DQT_SHARED -DQT_THREAD_SUPPORT -DQT_PLUGIN -g -MT
> s1.lo -MD -MP -MF .deps/s1.Tpo -c s1.cpp -o s1.o >/dev/null 2>&1
> /bin/sh ../../libtool --tag=3DCXX --mode=3Dlink g++ -g -fno-exceptions -W=
all
> -W -D_GNU_SOURCE -D_REENTRANT   -DQT_CLEAN_NAMESPACE -DQT_NO_COMPAT
> -I../.. -I../../muse/widgets -I/usr/share/qt3/include -O3
> -fomit-frame-pointer -ffast-math -fstrength-reduce -funroll-loops -I..
> -I../../synti -I../../muse/widgets -DQT_SHARED -DQT_THREAD_SUPPORT
> -DQT_PLUGIN -g    -o s1.la -rpath /usr/local/lib/muse/synthi -module
> -avoid-version s1.lo ../libsynti/libsynti.la -lasound -lm -ldl
> -L/usr/share/qt3/lib -lqt-mt -lqui
> g++ -shared
> -nostdlib /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib/crti.o
> /usr/lib/gcc/i486-linux-gnu/4.0.3/crtbeginS.o  .libs/s1.o
> -Wl,--whole-archive ../libsynti/.libs/libsynti.a -Wl,--no-whole-archive=20
> -L/usr/share/qt3/lib /usr/lib/libqt-mt.so -L/usr/X11R6/lib -laudio -lXt
> /usr/lib/libjpeg.so -lpng -lz -lXi -lXrender -lXrandr -lXcursor -lXinerama
> -lXft /usr/lib/libfreetype.so -lfontconfig -lXext -lX11 -lSM -lICE
> -lpthread /usr/lib/libasound.so -ldl -lqt-mt -lqui
> -L/usr/lib/gcc/i486-linux-gnu/4.0.3
> -L/usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib
> -L/usr/lib/gcc/i486-linux-gnu/4.0.3/../../.. -L/lib/../lib
> -L/usr/lib/../lib -lstdc++ -lm -lc -lgcc_s
> /usr/lib/gcc/i486-linux-gnu/4.0.3/crtendS.o
> /usr/lib/gcc/i486-linux-gnu/4.0.3/../../../../lib/crtn.o  -Wl,-soname
> -Wl,s1.so -o .libs/s1.so rm -fr .libs/s1.lax
> mkdir .libs/s1.lax
> rm -fr .libs/s1.lax/libsynti.a
> mkdir .libs/s1.lax/libsynti.a
> (cd .libs/s1.lax/libsynti.a && ar
> x /home/kawada/000_go_stockage/XLinux/00_Compilation
> fr=C3=A9quente/muse/synti/s1/../libsynti/.libs/libsynti.a)
> ar: /home/kawada/000_go_stockage/XLinux/00_Compilation: No such file or
> directory
> make[5]: *** [s1.la] Erreur 9
>
> :-( ouinnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn! What is the solution ????
>
> Stan.


you might be able to leave the s1 support (that's a software synth)
comment it somewhere in a Makefile or maybe there is also a ./configure=20
toogle.

hope that helps

ps: might be the gcc version i've nerve seen before (at least not used)