Re: Multiple LIRC Instances in systemd Service

[Bengt M. <no...@be...>]

On 04/09/13 13:16, XXXXXXXXXXXXXXXX wrote:> I'm trying to run multiple
LIRC instances (one for each device) in a
> systemd service.
>
> This is the error I'm getting:
>
> lircd: could not assign address to socket
> lircd: Permission denied
>
....
>
> This is what my service file looks like:
>
> [Unit]
> Description=LIRC Daemon
> After=network.target
>
> [Service]
> Type=oneshot
> EnvironmentFile=/etc/sysconfig/lirc
> ExecStartPre=/bin/mkdir -p /run/lirc
> ExecStartPre=/bin/rm -f /dev/lircd /dev/lircd1
> ExecStartPre=/bin/rm -f /run/lirc/lircd /run/lirc/lircd1
> ExecStartPre=/bin/ln -s /run/lirc/lircd /dev/lircd
> ExecStartPre=/bin/ln -s /run/lirc/lircd1 /dev/lircd1
> ExecStart=/usr/sbin/lircd --device=/dev/input/event12
> --output=/run/lirc/lircd1 --pidfile=/run/lirc/lircd1.pid
> --driver=devinput --listen=8765 /etc/lirc/lircd.conf
> ExecStart=/usr/sbin/lircd --device=/dev/input/event10
> --output=/run/lirc/lircd --pidfile=/run/lirc/lircd.pid --driver=devinput
> --connect=localhost:8765 /etc/lirc/lircd.conf

Two processes are trying to bind to the same port.
Change one "8765" to something else (8766?) or just leave out one of the
--listen arguments.