Re: lirc 0.9.0 - iguanaIR - mediagate GP-IR02BK(TSGP-IR01) not working

[Christopher M. <g8k...@op...>]

On 12/14/2012 12:34 PM, Christopher Moore wrote:
> Hello everyone,
>
> I just upgraded from mythbuntu 10.04 -> 12.04 and now my remote has 
> stopped working, except for the 1 aspect/zoom button ( 
> 000000037ff07bd8 ).  I've been searching through the web for solutions 
> and so far nothing has worked.
>
> What is working is my iguanair daemon ( 1.0.3-1ubuntu1 ) started 
> successfully and registered the /dev/'s properly.  I can also 
> communicate with it :
>
> igclient --receiver-on --sleep 30
> ...
> received 6 signal(s):
>   pulse: 298
>   space: 469
>   pulse: 341
>   space: 554
>   pulse: 768
>   space: 43690
> received 1 signal(s):
>   space: 152917
> ...
>
> ll /dev/iguanaIR/
> total 0
> srwxrwxrwx 1 iguanair iguanair 0 Dec 14 10:15 0
> srwxrwxrwx 1 iguanair iguanair 0 Dec 14 10:15 ctl
> lrwxrwxrwx 1 iguanair iguanair 1 Dec 14 10:15 fred -_ 0
>
> I also followed the directions on their page, as I did previously, to 
> compile iguanair into lirc ( 0.9.0-0ubuntu1 ) and install the .deb's 
> generated from the process.
>
> ll /var/run/lirc/
> total 8
> srw-rw-rw- 1 root root 0 Dec 14 10:25 lircd
> srw-rw-rw- 1 root root 0 Dec 14 10:25 lircd11
> -rw-r--r-- 1 root root 5 Dec 14 10:25 lircd1.pid
> -rw-r--r-- 1 root root 5 Dec 14 10:25 lircd.pid
>
> REMOTE ARGS = --output=/var/run/lirc/lircd --driver=iguanaIR
> --device=/dev/iguanaIR/0 --listen
> TRANSMITTER ARGS = --output=/var/run/lirc/lircd11 --driver=iguanaIR
> --device=/dev/iguanaIR/0 -H iguanaIR --connect=localhost:8765
> --pidfile=/var/run/lirc/lircd1.pid
>
>
> irsend is also running and I can successfully send commands manually
> using a terminal to my tv.
>
> my hardware.conf remains unchanged from before :
>
> #Chosen Remote Control
> REMOTE="Iguanaworks USB IR Transceiver"
> REMOTE_MODULES=""
> REMOTE_DRIVER="iguanaIR"
> REMOTE_DEVICE="/dev/iguanaIR/0"
> REMOTE_LIRCD_CONF="myremote.conf"
> REMOTE_LIRCD_ARGS=""
>
> #Chosen IR Transmitter
> TRANSMITTER="IguanaIR"
> TRANSMITTER_MODULES=""
> TRANSMITTER_DRIVER="iguanaIR"
> TRANSMITTER_DEVICE="/dev/iguanaIR/0"
> TRANSMITTER_SOCKET="/var/run/lirc/lircd1"
> TRANSMITTER_LIRCD_CONF="toshiba.conf"
> TRANSMITTER_LIRCD_ARGS="-H iguanaIR"
>
> irw, however only seems to register 1 command ( zoom ) and no other
> keys.
>
> I confirmed vs the /usr/share/lirc/remotes that no codes changed, and
> my settings match.
>
> I've attached my configuration files.
>
> Any ideas ? I have thrown every config at this I have found for this 
> remote.  The ir-keymap solution also does not work, probably b/c I am 
> not using a mceusb receiver.   This makes no sense ...
>
> Thanks
>
> Christopher
>
>
> ------------------------------------------------------------------------------
> LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial
> Remotely access PCs and mobile devices and provide instant support
> Improve your efficiency, and focus on delivering more value-add services
> Discover what IT Professionals Know. Rescue delivers
> http://p.sf.net/sfu/logmein_12329d2d

I should also mention that  I have tried running 'irrecord' and 
'irrecord -f' to force raw mode, and still only that 1 button gets 
recognised.