Re: lirc 0.8.7 on debian squeeze: module ok, no response from irw

[Josu L. <jos...@gm...>]

2012/12/3 Fabrice Delente <del...@gm...>:
> Hello.
>
> I have compiled 0.8.7 with the mceusb/mceusb2 modules on Debian Squeeze.
>
> My IR receiver is detected when I plug it in, and the mceusb module gets
> loaded: /var/log/messages shows
>
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.024106] usb 2-1: new full speed USB
> device using uhci_hcd and address 5
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185352] usb 2-1: New USB device
> found, idVendor=0471, idProduct=0815
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185365] usb 2-1: New USB device
> strings: Mfr=1, Product=2, SerialNumber=3
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185375] usb 2-1: Product: eHome
> Infrared Transceiver
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185383] usb 2-1: Manufacturer:
> Philips
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185390] usb 2-1: SerialNumber:
> PH00Xapa
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.185694] usb 2-1: configuration #1
> chosen from 1 choice
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.215258] lirc_dev: IR Remote Control
> driver registered, major 61
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.223196]
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.223204] lirc_mceusb2: Philips eHome
> USB IR Transceiver and Microsoft MCE 2005 Remote Control driver for LIRC
> $Revision: 1.44 $
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.223214] lirc_mceusb2: Daniel
> Melander <li...@ra...>, Martin Blatter <mar...@ya...>
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.336112] usb 2-1: reset full speed
> USB device using uhci_hcd and address 5
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.487360] lirc_dev:
> lirc_register_plugin: sample_rate: 0
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.492353] lirc_mceusb2[5]: Philips
> eHome Infrared Transceiver on usb2:5
> Dec  3 18:53:22 hp-compaq kernel: [ 3270.492488] usbcore: registered new
> interface driver lirc_mceusb2
> Dec  3 18:54:16 hp-compaq kernel: [ 3323.677567] ===>rt_ioctl_giwscan. 1(1)
> BSS returned, data->length = 190
> Dec  3 18:56:16 hp-compaq kernel: [ 3443.678760] ===>rt_ioctl_giwscan. 2(2)
> BSS returned, data->length = 424
>
> After that, I start lircd:
>
> # /etc/init.d/lirc start
> Loading LIRC modules:.
> Starting remote control daemon(s) : LIRC :lircd: WARNING: invalid code found
> for mceusb: 'TV2'
> lircd: WARNING: invalid code found for mceusb: 'BLUE'
> lircd: WARNING: invalid code found for mceusb: 'YELLOW'
> lircd: WARNING: invalid code found for mceusb: 'GREEN'
> lircd: WARNING: invalid code found for mceusb: 'RED'
> lircd: WARNING: invalid code found for mceusb: 'TELETEXT'
> .
> However, if I start irw as root to test the keys on the remote, I get no
> response; what did I miss?
>
> Thanks!
>
>
> ------------------------------------------------------------------------------
> Keep yourself connected to Go Parallel:
> BUILD Helping you discover the best ways to construct your parallel
> projects.
> http://goparallel.sourceforge.net

Check /etc/lirc/lircd.conf for theese keys.

Regards.

--
Josu Lazkano