irw didn't receive input from my remote

[Matthias M. <Mat...@gm...>]

I've running Debian Wheezy with kernel 3.2.0 and lirc 0.9.
I've tried to run thre remote of my (old) Haupauge PVR350 but it doesn't 
work.

ls /dev/lir*
/dev/lircd

cat /proc/bus/input/devices
 :
I: Bus=0019 Vendor=0000 Product=0000 Version=0000
N: Name="Eee PC WMI hotkeys"
P: Phys=eeepc-wmi/input0
S: Sysfs=/devices/platform/eeepc-wmi/input/input5
U: Uniq=
H: Handlers=kbd event5 rfkill 
B: PROP=0
B: EV=100013
B: KEY=7e40000 0 0 0 0 0 0 0 0 114008 100000 3000800 1100000 e0000 0 0 0
B: MSC=10
 :
I: Bus=0018 Vendor=0000 Product=0000 Version=0000
N: Name="i2c IR (Hauppauge WinTV PVR-350"
P: Phys=i2c-0/0-0018/ir0
S: Sysfs=/devices/virtual/rc/rc0/input8
U: Uniq=
H: Handlers=kbd event8 
B: PROP=0
B: EV=100013
B: KEY=10afc312 2142017 0 0 0 0 118000 41a8 4801 9e16c0 0 0 10000ffc
B: MSC=10

/etc/lirc/hardware.conf contains:
# Run "lircd --driver=help" for a list of supported drivers.
DRIVER="devinput"
# usually /dev/lirc0 is the correct setting for systems using udev 
DEVICE="/dev/input/event8"
MODULES="ir-kbd-i2c"

/etc/lirc/lircmd.conf
#UNCONFIGURED

/etc/lirc/lircd.conf
-> is a copy of /usr/share/lirc/remotes/hauppauge/lircd.conf.hauppauge

If I use "/dev/input/event5" in /etc/lirc/hardware.conf I get the numbers 
0-9 within a terminal if pressed on the remote. But nothing for the other 
keys.
If I run irw in another terminal nothing changed. I get the numbers within 
the active terminal but nothing in irw.

If I use "/dev/input/event8" in /etc/lirc/hardware.conf I get nothing in the 
terminal and nothing in irw.

It seems that the input from my remote doesn't reach lirc.

Thanks in advance for any advice.

br
Matthias
-- 
Don't Panic