|
From: Manfred Schmidt-V. <man...@ma...> - 2012-03-09 12:34:41
|
On 09.03.2012 09:52, Manfred Schmidt-Voigt wrote: > On 07.03.2012 17:44, Manfred Schmidt-Voigt wrote: >> Hello List, >> >> I just jumped to kernel 3.2.7 on my Debian Sid system and tried to >> reconfigure LIRC for that again. But I got the following problems: >> >> >> mannitec02:/usr/local/src/lirc-0.9.0-pre1# uname -a >> Linux mannitec02 3.2.7.20120307 #1 SMP Wed Mar 7 15:05:35 CET 2012 i686 >> GNU/Linux >> >> mannitec02:/usr/local/src/lirc-0.9.0-pre1# modprobe lirc_dev >> >> mannitec02:/usr/local/src/lirc-0.9.0-pre1# modprobe lirc_serial >> ERROR: could not insert 'lirc_serial': Exec format error >> >> mannitec02:/usr/local/src/lirc-0.9.0-pre1# modinfo lirc_serial >> filename: /lib/modules/3.2.7.20120307/misc/lirc_serial.ko >> license: GPL >> author: Ralph Metzler, Trent Piepho, Ben Pfaff, Christoph >> Bartelmus, Andrei Tanas >> description: Infra-red receiver driver for serial ports. >> depends: lirc_dev >> vermagic: 2.6.37.20110219.1 SMP mod_unload modversions CORE2 >> parm: type:Hardware type (0 = home-brew, 1 = IRdeo, 2 = IRdeo >> Remote, 3 = AnimaX, 4 = IgorPlug) (int) >> parm: io:I/O address base (0x3f8 or 0x2f8) (int) >> parm: irq:Interrupt (4 or 3) (int) >> parm: share_irq:Share interrupts (0 = off, 1 = on) (bool) >> parm: sense:Override autodetection of IR receiver circuit (0 = >> active high, 1 = active low ) (bool) >> parm: txsense:Sense of transmitter circuit (0 = active high, 1 >> = active low ) (bool) >> parm: softcarrier:Software carrier (0 = off, 1 = on) (bool) >> parm: debug:Enable debugging messages (bool) >> >> >> It seems so that everything is in the right place but I cannot get it >> working. Any clues? >> >> Thanks >> Manfred >> >> > > Hi, > I have now installed the latest lirc version (lirc-0.9.0.tar.bz2). > > Now I get this result: > > mannitec02:/usr/local/src/lirc-0.9.0# modprobe -v lirc_serial > insmod /lib/modules/3.2.7.20120307/misc/lirc_serial.ko > ERROR: could not insert 'lirc_serial': Invalid argument > > > and out of dmesg: > > lirc_dev: IR Remote Control driver registered, major 250 > lirc_serial: disagrees about version of symbol lirc_dev_fop_ioctl > lirc_serial: Unknown symbol lirc_dev_fop_ioctl (err -22) > lirc_serial: disagrees about version of symbol lirc_register_driver > lirc_serial: Unknown symbol lirc_register_driver (err -22) > lirc_serial: disagrees about version of symbol lirc_dev_fop_read > lirc_serial: Unknown symbol lirc_dev_fop_read (err -22) > lirc_serial: disagrees about version of symbol lirc_dev_fop_poll > lirc_serial: Unknown symbol lirc_dev_fop_poll (err -22) > lirc_serial: disagrees about version of symbol lirc_dev_fop_open > lirc_serial: Unknown symbol lirc_dev_fop_open (err -22) > lirc_serial: disagrees about version of symbol lirc_dev_fop_close > lirc_serial: Unknown symbol lirc_dev_fop_close (err -22) > > > Is the lirc Software not compatible to the new kernel or have I missed > something else? During the ./setup.sh of the lirc software there has has > nothing changed in my /etc/lirc directory. Should it with the new Version? > > I'm a little bit lost.... > > regards > Manfred > Ok, its me again. I've got it now by my own. I use now the staging drivers and they worked for me. bye -- ------- Manfred Schmidt-Voigt ------- ----- www.mannitec.de ----- ------- mailto:man...@ma... ------- |