|
From: dj4killer <dj4...@gm...> - 2010-09-29 20:41:58
|
Hello,
I have problem with LIRC and MCEUSB driver. Some information:
Bus 004 Device 002: ID 0471:206c Philips
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0471 Philips
idProduct 0x206c
bcdDevice 0.02
iManufacturer 1 PHILIPS
iProduct 2 MCE USB IR Receiver- Spinel plusf0r ASUS
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 481
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
2.6.32-21-generic #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 x86_64
GNU/Linux
lircd 0.8.7
lircd -n
lircd: lircd(default) ready, using /var/run/lirc/lircd
lircd: accepted new client on /var/run/lirc/lircd
lircd: could not open /dev/lirc
lircd: default_init(): No such device
lircd: WARNING: Failed to initialize hardware
lircd: removed client
./configure --with-moduledir=/lib/modules/2.6.32-21-generic/misc --with-x
--with-driver=mceusb --with-major=61 --with-port=none --with-irq=none
Thanks for advance.
|