From: gyrlla g. <gyr...@gm...> - 2008-09-13 08:34:46
|
I apologize if this has been answered a gazillion times, but I haven't been able to find the answer from google, mythtv-users archives, or the lirc archives. I cannot get my USB-UIRT to change channels for my Motorola DCT2524/1612 used for Comcast standard digital cable subscription. I know this is not a hardware issue, because I was able to get this to work on Windows XP with SageTV trial software. I am able to get irsend to at least transmit some sort of a signal to the STB because I see a blink every time I execute irsend - it may be that I don't have the right frequency parameter setup in my lircd.conf, but if the frequency parameter is the source of my problem, I don't know the specific frequency value to set it to. I already tried some frequencies (36000, 36500, 37000, 37500, ..., 40000). background info: ------------------------------------------------------ Xbuntu 8.04.1 kernel 2.6.24-19-generic #1 SMP Wed Aug 20 17:53:40 UTC 2008 x86_64 GNU/Linux downloaded source and compiled: lirc-0.8.3 #lsmod ftdi_sio 43144 0 usbserial 41840 1 ftdi_sio usbcore 169904 6 ftdi_sio,usbserial,usbhid,ehci_hcd,ohci_hcd #lircd --driver=usb_uirt_raw --device=/dev/ttyUSB0 #irsend SEND_ONCE DCT2524 power buffer: -BEGIN- buffer: -SEND_ONCE DCT2524 power- buffer: -SUCCESS- buffer: -END- my /etc/lircd.conf begin remote name DCT2524 bits 16 flags SPACE_ENC|CONST_LENGTH eps 30 aeps 100 header 9036 4424 one 556 2185 zero 556 4424 ptrail 556 gap 100025 toggle_bit 0 frequency 40000 begin codes power 0x000000000000AFF9 rew 0x00000000000087F7 play 0x00000000000027FD ffwd 0x00000000000047FB stop 0x000000000000C7F3 pause 0x00000000000007FF rec 0x00000000000073FC skipback 0x000000000000C3F7 mydvr 0x00000000000043FF live 0x00000000000083F0 pageup 0x000000000000A3F3 pagedown 0x00000000000023FB a_lock 0x00000000000097F6 b_day- 0x00000000000063FD c_day+ 0x000000000000E3F5 up 0x000000000000D3F6 down 0x00000000000053FE left 0x00000000000093F1 right 0x00000000000013F9 ok/select 0x00000000000077F8 guide 0x000000000000F3F4 info 0x00000000000033FA menu 0x00000000000067F9 exit 0x000000000000B7F4 help 0x000000000000B3F2 last 0x00000000000037FC vol+ 0x0000000000004FF3 vol- 0x0000000000008FFB mute 0x0000000000000FF7 fav 0x00000000000057FA ch+ 0x0000000000002FF5 ch- 0x000000000000CFFD 1 0x0000000000007FF0 2 0x000000000000BFF8 3 0x0000000000003FF4 4 0x000000000000DFFC 5 0x0000000000005FF2 6 0x0000000000009FFA 7 0x0000000000001FF6 8 0x000000000000EFFE 9 0x0000000000006FF1 0 0x000000000000FFFF tv/vcr_input 0x000000000000D7F2 hdzoom_enter 0x000000000000FDFC pnp-swap 0x0000000000003BF2 end codes end remote |