Trouble creating config for remote NAD SR-5

[oskar s. <os...@ce...>]

Hi. I'm having some trouble creating a working configuration for my NAD 
SR-5 Remote.
when i use irrecord on /dev/lirc0 to create a config it looks like this 
when done:

begin remote

  name  SR-5
  bits           16
  eps            30
  aeps          100

  one             0     0
  zero            0     0
  pre_data_bits   16
  pre_data       0x1F
  gap          203992
  min_repeat      11
  toggle_bit      0


      begin codes
          CD                       0x6DCD
          TUNER                    0x6DCD
          AUX                      0x6F4D
          DISC/PHONO               0xEDCD
          TAPE_MON                 0x6DCD
          TAPE_2                   0x6DCD
          VIDEO_1                  0x6DCD
          VIDEO_2                  0x6DCD
          VIDEO_3                  0x6DCD
          1                        0x6DCD
          2                        0x6DCD
          3                        0x6F6D
          4                        0x6DCD
          5                        0x6DCD
          6                        0x6DCD
          7                        0x6DCD
          8                        0xEDCD
          9                        0x6DCD
          0                        0x6DCD
          VOL_UP                   0xEDCD
          VOL_DOWN                 0x6DCD
      end codes

end remote


When i use mode2 on /dev/lirc0 to check the commands i get:
For a quick push on:
CD
code: 0x001f6dcd
code: 0x6f6dddcd
code: 0x776ddfff
Tuner:
code: 0x001f6dcd
code: 0x6f6dddec
code: 0x6ee74fff
Aux:
code: 0x001f6dcd
code: 0x2f6ddeec
code: 0x32e6efff
......
1
code: 0x001f6dcd
code: 0x2f6dcecc
code: 0x7a6f6fff
2
code: 0x001f6dcd
code: 0x6f6dddec
code: 0x3a6f6fff
3
code: 0x001f6dcd
code: 0x2f6dcdec
code: 0x336f6fff

When i hold any button down for more than a couple 10's of a second i 
get 3-4 of:
code: 0x001fffff
each second.

Any help is apreciated.
/Oskar Stenman