From: yanjun lu <syb...@ya...> - 2005-12-14 08:10:16
|
HI team I have a capture card name by Winfast PVR2000, I complie the lastest version of LIRC with PVR2000's remote without any problem , but when I check the status, what is funny is that: [root@root lirc-0.7.2]# tail /var/log/messages Dec 14 15:40:42 root kernel: cx8800[0]: i2c register ok Dec 14 15:40:42 root kernel: cx8800[0]: registered device video0 [v4l2] Dec 14 15:40:42 root kernel: cx8800[0]: registered device vbi0 Dec 14 15:41:48 root kernel: lirc_dev: IR Remote Control driver registered, at major 61 Dec 14 15:41:48 root kernel: lirc_i2c: no version for "lirc_unregister_plugin" found: kernel tainted. Dec 14 15:41:48 root kernel: bttv: driver version 0.9.15 loaded Dec 14 15:41:48 root kernel: bttv: using 8 buffers with 2080k (520 pages) each for captureDec 14 15:41:48 root kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) Dec 14 15:41:48 root kernel: cx8800[0]: i2c attach [client=Hauppauge IR] Dec 14 15:41:48 root kernel: lirc_dev: lirc_register_plugin: sample_rate: 10 [root@root lirc-0.7.2]# tail /var/log/lircd Dec 9 17:51:27 root lircd 0.7.2: removed client Dec 10 18:02:31 root lircd 0.7.2: lircd(leadtek_pvr2000) ready Dec 10 18:02:34 root lircd 0.7.2: accepted new client on /dev/lircd Dec 10 18:02:35 root lircd 0.7.2: removed client Dec 10 18:09:23 root lircd 0.7.2: accepted new client on /dev/lircd Dec 10 18:09:27 root lircd 0.7.2: removed client Dec 10 18:13:48 root lircd 0.7.2: caught signal Dec 14 15:42:31 root lircd 0.7.2: lircd(leadtek_pvr2000) ready Dec 14 15:42:48 root lircd 0.7.2: accepted new client on /dev/lircd Dec 14 15:42:51 root lircd 0.7.2: removed client [root@root lirc-0.7.2]# [root@root lirc-0.7.2]# lsmod |more Module Size Used by bttv 150541 0 lirc_i2c 10244 0 lirc_dev 14788 1 lirc_i2c cx8800 45149 1 cx88xx 19397 1 cx8800 i915 76869 2 parport_pc 24705 1 lp 11565 0 parport 41737 2 parport_pc,lp autofs4 24005 0 sunrpc 160421 1 ipt_REJECT 6465 1 ipt_state 1857 1 ip_conntrack 40693 1 ipt_state iptable_filter 2753 1 ip_tables 16193 3 ipt_REJECT,ipt_state,iptable_filter dm_mod 54741 0 button 6481 0 battery 8517 0 ac 4805 0 joydev 8705 0 md5 4033 1 ipv6 232577 8 uhci_hcd 31449 0 ehci_hcd 31557 0 ir_common 4677 0 tuner 18413 0 video_buf 21701 3 bttv,cx8800,cx88xx i2c_algo_bit 8521 2 bttv,cx8800 v4l1_compat 11973 1 cx8800 v4l2_common 5953 2 bttv,cx8800 btcx_risc 4425 3 bttv,cx8800,cx88xx videodev 9664 2 bttv,cx8800 i2c_core 22081 6 bttv,lirc_i2c,cx8800,cx88xx,tuner,i2c_algo_bit snd_intel8x0 34829 2 snd_ac97_codec 64401 1 snd_intel8x0 snd_pcm_oss 47609 0 snd_mixer_oss 17217 2 snd_pcm_oss snd_pcm 97993 2 snd_intel8x0,snd_pcm_oss snd_timer 29765 1 snd_pcm snd_page_alloc 9673 2 snd_intel8x0,snd_pcm gameport 4801 1 snd_intel8x0 snd_mpu401_uart 8769 1 snd_intel8x0 snd_rawmidi 26725 1 snd_mpu401_uart snd_seq_device 8137 1 snd_rawmidi snd 54053 11 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 9889 2 snd e100 39364 0 mii 4673 1 e100 floppy 58609 0 ext3 116809 2 jbd 74969 1 ext3 [root@root ~]#dmesg EREO cx8800[0]: AUD_STATUS: 0x2572 [mono/no pilot] ctl=BTSC_AUTO_STEREO cx8800[0]: AUD_STATUS: 0x2572 [mono/no pilot] ctl=BTSC_AUTO_STEREO cx8800[0]: AUD_STATUS: 0x2572 [mono/no pilot] ctl=BTSC_AUTO_STEREO cx8800[0]: AUD_STATUS: 0x25b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO ......(very long as same as above) why? Thanks and Cheers, any response give greatly appreciate in advance __________________________________________________ 赶快注册雅虎超大容量免费邮箱? http://cn.mail.yahoo.com |