Re: LIRC ATI USB Remote Problems

[Paul M. <pmi...@us...>]

Try running irrecord and generating a new config file.

-Paul

On Monday 28 November 2005 12:54 pm, bladah29 (sent by Nabble.com) wrote:
> Hey, I am a newbie to the linux arena and I'm attempting to create a
> mythtv box to use in conjuction with my infocus projector (so cool). I've
> got nearly everything working with the exception of the ati remote using
> LIRC. I have searched through every forum, tried gatos and still no luck.
> I've reverted back to llirc_atiusb. After reading the forums, i've been
> using a coouple different utilities to test. When using IRW, I get no
> output, however, when I attempt to capture raw data with mode2, I do.
> I've listed some configs and various output below. Any help would that
> could be provided would be great. I've beat my head against the wall over
> this for countless hours. Thanks in advance.
>
> I apologize for the lengthy post, but I wanted to provide as much
> information as I could. Please keep in mind that I am very fresh to all
> of this so the most basic commands could stump me for hours.
>
> LSMOD:
> ati_remote 12617 0
> lirc_atiusb 18720 0
> lirc_dev 16068 1 lirc_atiusb
>
> MODPROBE.CONF
> alias char-major-61 lirc_atiusb
>
> LIRCD.CONF in ETC folder
> begin remote
>
> name ati
> bits 16
> eps 30
> aeps 100
>
> one 0 0
> zero 0 0
> pre_data_bits 8
> pre_data 0x14
> post_data_bits 16
> post_data 0xF000
> gap 147987
> toggle_bit 0
>
>
> begin codes
> a 0x000000000000C500
> b 0x000000000000C601
> tv 0x000000000000C803
> dvd 0x000000000000C904
> web 0x000000000000CA05
> book 0x000000000000CB06
> hand 0x000000000000CC07
> vol- 0x000000000000CE09
> vol+ 0x000000000000CD08
> mute 0x000000000000CF0A
> ch- 0x000000000000D10C
> ch+ 0x000000000000D00B
> 1 0x000000000000D20D
> 2 0x000000000000D30E
> 3 0x000000000000D40F
> 4 0x000000000000D510
> 5 0x000000000000D611
> 6 0x000000000000D712
> 7 0x000000000000D813
> 8 0x000000000000D914
> 9 0x000000000000DA15
> 0 0x000000000000DC17
> menu 0x000000000000DB16
> check 0x000000000000DD18
> c 0x000000000000DE19
> d 0x000000000000E01B
> timer 0x000000000000E11C
> up 0x000000000000DF1A
> down 0x000000000000E722
> left 0x000000000000E21D
> right 0x000000000000E41F
> ok 0x000000000000E31E
> pip 0x000000000000E520
> e 0x000000000000E621
> f 0x000000000000E823
> rewind 0x000000000000E924
> play 0x000000000000EA25
> fforward 0x000000000000EB26
> record 0x000000000000EC27
> stop 0x000000000000ED28
> pause 0x000000000000EE29
> power 0x000000000000C702
> end codes
>
> end remote
>
> LIRC Version
> lircd 0.7.2
>
> --
> Sent from the LIRC forum at Nabble.com:
> http://www.nabble.com/LIRC-ATI-USB-Remote-Problems-t633893.html#a1687073