From: David C. <dr...@co...> - 2005-01-19 05:01:57
|
Okay. That worked. My remoted.conf looks like: . <comments ommitted> . begin remote name SA2000 flags CONST_LENGTH|RAW_CODES eps 30 aeps 100 ptrail 0 repeat 0 0 frequency 57600 gap 100240 I changed over to use the remote_serial module instead. I decided to stick with the SA2000 config file from lirc.org since when I tested with remote_irw with the actisys, the SA2000 config file correctly identified all the keys pressed. Thanks Karl and Mike for all your help. Karl Bongers wrote: >On Mon, Jan 17, 2005 at 11:40:29PM -0500, David Cheng wrote: > > >>Is your motorola dct2000 a scientific atlanta box? My cable box >>(external tuner) is the Scientific Atlanta Explorer 1850 >>(http://www.sciatl.com/products/consumers/Exp1850.htm). >> >>I have tried both the >>Actisys-200L(http://www.mytvstore.com/product_id_003.html) using the >>remote_sir module and your IR Blaster (http://www.irblaster.info/) using >>the remote_serial module to no avail. >> >> >> > >Try putting: >frequency 56000 >in the DCT2000 config file, then retry the home brew serial transmitter. >The Actisys unit does not work at this frequency, so don't bother trying >it. Let me know if it works. > > > >>Michael Libeskind wrote: >> >> >> >>>I used the motorola dct2000 with my scientific atlanta box: >>>http://lirc.sourceforge.net/remotes/motorola/DCT2000 >>> >>>I'm not sure which model it is you have, but mine is a cft2200 and >>>looks like the box on http://www.irblaster.info >>> >>>(that's the ir blaster I"m using too) >>> >>> >>> >>>On Mon, 17 Jan 2005 22:59:06 -0500, David Cheng <dr...@co...> wrote: >>> >>> >>> >>> >>>>Hi, >>>> >>>>Has anyone managed to get an Actisys 200L to work with a Scientific >>>>Atlanta Explorer 1850 cable box? Or even a 4200? I hear that they all >>>>use the same IR codes. >>>> >>>>I've followed the instructions at >>>>http://www.iwamble.net/IRBlaster_Howto.txt. Everything went fine and >>>>the actisys is sending out pulses when I call change_channel.csh. My >>>>cablebox seems to ignore it. >>>> >>>>I'm running gentoo 2.6.9, the actisys is plugged into com1 serial port. >>>>I'm using the Explorer_2000 from lirc.org for my remote. When I run >>>>irw, it interprets my remote buttons correctly. >>>> >>>>Here's the output of dmesg when I call 'modprobe remote_sir' >>>>========= >>>>remote_dev: IR Remote Control driver registered, at major 72 >>>>remote_dev: remote_register_plugin:sample_rate: 0 >>>>remote_sir: I/O port 0x03f8, IRQ 4. >>>>enable_irq(4) unbalanced from f8bafd32 >>>>remote_sir: Installed. >>>> >>>>Here's my /etc/modules.conf >>>>========= >>>>### modules-update: start processing /etc/modules.d/lirc-remote >>>>alias char-major-72 remote_sir >>>>below remote_sir remote_dev >>>>options remote_sir irq=4 io=0x3f8 >>>>### modules-update: end processing /etc/modules.d/lirc-remote >>>> >>>>Here's the output from remoted (the modified lircd) when I call >>>>change_channel.csh 32: >>>>========= >>>>Jan 17 18:52:14 penguin remoted 0.7.0pre8: accepted new client on >>>>/dev/remoted >>>>Jan 17 18:52:14 penguin remoted 0.7.0pre8: removed client >>>>Jan 17 18:52:15 penguin remoted 0.7.0pre8: accepted new client on >>>>/dev/remoted >>>>Jan 17 18:52:15 penguin remoted 0.7.0pre8: removed client >>>>Jan 17 18:52:16 penguin remoted 0.7.0pre8: accepted new client on >>>>/dev/remoted >>>>Jan 17 18:52:16 penguin remoted 0.7.0pre8: removed client >>>> >>>>------------------------------------------------------- >>>>The SF.Net email is sponsored by: Beat the post-holiday blues >>>>Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. >>>>It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt >>>> >>>> >>>> >>>> >>>> >>>------------------------------------------------------- >>>The SF.Net email is sponsored by: Beat the post-holiday blues >>>Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. >>>It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt >>> >>> >>> >>> >>> >>------------------------------------------------------- >>The SF.Net email is sponsored by: Beat the post-holiday blues >>Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. >>It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt >> >> >> > > > >------------------------------------------------------- >The SF.Net email is sponsored by: Beat the post-holiday blues >Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. >It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt > > > |