Menu
▾
▴
lirc-list
|
From: Blammo <bla...@gm...> - 2005-02-15 17:36:40
|
Using this wonderful guide and drivers (http://www.grangenet.net/~greg/streamzap.html) I was able to get my streamzap working under 2.6 kernels (FC3). It had been working wonderfully under 2.4, no complaints. However, under 2.6, and these drivers.. I'm getting what I could best call a queueing problem. LIke so: Hit key --- nothing reported in IRW Hit key --- two key presses reported in IRW I see the little red light on the USB reciever flash for EACH keypress, so I KNOW It's getting to the machine. I'm sure this is an easy fix... Any ideas? |
|
From: <li...@ba...> - 2005-02-18 15:13:50
|
Hi! Blammo "bla...@gm..." wrote: > Using this wonderful guide and drivers > (http://www.grangenet.net/~greg/streamzap.html) I was able to get my [...] > However, under 2.6, and these drivers.. I'm getting what I could best > call a queueing problem. LIke so: The next release of LIRC will have Streamzap support. It's already in CVS but it has not been tested with 2.6 yet which you might want to do now. Christoph |
|
From: Blammo <bla...@gm...> - 2005-02-19 03:41:50
|
Wonderful. I'll "check" it out..... (terrible pun intended) On 17 Feb 2005 22:25:00 +0100, Christoph Bartelmus <li...@ba...> wrote: > Hi! > > Blammo "bla...@gm..." wrote: > > Using this wonderful guide and drivers > > (http://www.grangenet.net/~greg/streamzap.html) I was able to get my > [...] > > However, under 2.6, and these drivers.. I'm getting what I could best > > call a queueing problem. LIke so: > > The next release of LIRC will have Streamzap support. > It's already in CVS but it has not been tested with 2.6 yet which you > might want to do now. > > Christoph > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > |
|
From: Blammo <bla...@gm...> - 2005-02-19 22:51:17
|
Ok, downloaded and compiled and installed.. No diff.. it takes 2-3
key presses to get through.. Again I DO see the red light flicker on
the USB reciever each time I hit the key.
So I turned the debug up to 255 on lircd, and here's what I see:
(this was one DOWN remote-press)
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <p1
lircd 0.7.1-CVS: space expected
lircd 0.7.1-CVS: failed on sync
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: c16777215
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <s16777215
lircd 0.7.1-CVS: sync
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1536
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1792
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: failed on bit 10
lircd 0.7.1-CVS: failed on code
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: sync
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1536
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: timeout: 1536
lircd 0.7.1-CVS: <p768
lircd 0.7.1-CVS: space expected
lircd 0.7.1-CVS: failed on bit 5
lircd 0.7.1-CVS: failed on code
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <p768
lircd 0.7.1-CVS: space expected
lircd 0.7.1-CVS: failed on sync
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: c90215
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <s90215
lircd 0.7.1-CVS: sync
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1536
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: 1
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1792
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: failed on bit 10
lircd 0.7.1-CVS: failed on code
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: sync
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s1792
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: failed on bit 2
lircd 0.7.1-CVS: failed on code
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
lircd 0.7.1-CVS: trying "StreamZap" remote
lircd 0.7.1-CVS: <s1792
lircd 0.7.1-CVS: sync
lircd 0.7.1-CVS: +p1536
lircd 0.7.1-CVS: <p1536
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: +s768
lircd 0.7.1-CVS: <s768
lircd 0.7.1-CVS: +p768
lircd 0.7.1-CVS: 0
lircd 0.7.1-CVS: timeout: 1536
lircd 0.7.1-CVS: <p768
lircd 0.7.1-CVS: space expected
lircd 0.7.1-CVS: failed on bit 3
lircd 0.7.1-CVS: failed on code
lircd 0.7.1-CVS: failed "StreamZap" remote
lircd 0.7.1-CVS: decoding failed for all remotes
irw showed nothing from that keypress.
I'm going to go through and re-do irrecord and see if I can make it
work any better. I'm attaching my /etc/lircd.conf in case anyone else
with a streamzap can take a look at it, and see something wrong..
# Please make this file available to others
# by sending it to <li...@ba...>
#
# this config file was automatically generated
# using lirc-0.7.1-CVS(streamzap) on Thu Feb 10 18:45:35 2005
#
# contributed by
#
# brand: test
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
name StreamZap
bits 14
flags RC5
eps 30
aeps 100
one 768 768
zero 768 768
plead 768
gap 65280
toggle_bit 0
begin codes
Power 0x38CA
Mute 0x28CB
1 0x28C1
2 0x38C2
3 0x28C3
4 0x38C4
5 0x28C5
6 0x38C6
7 0x28C7
8 0x38C8
9 0x28C9
0 0x38C0
ChUp 0x28CC
CHDown 0x38CE
VolUp 0x28CD
VolDown 0x38CF
Ok 0x28D2
Up 0x28D0
Down 0x38D4
Left 0x28D1
Right 0x38D3
Play 0x28D7
Menu 0x38D5
Exit 0x28D6
Pause 0x38D8
Stop 0x28D9
Record 0x38DC
TrackPrev 0x28DA
TrackNext 0x38DB
SeekFw 0x28DE
SeekBack 0x38DD
Red 0x28E0
Green 0x38E1
Yellow 0x28E2
Blue 0x38E3
end codes
end remote
|
|
From: <li...@ba...> - 2005-02-19 23:34:11
|
Hi! Blammo "bla...@gm..." wrote: > Ok, downloaded and compiled and installed.. No diff.. it takes 2-3 > key presses to get through.. Again I DO see the red light flicker on > the USB reciever each time I hit the key. > > So I turned the debug up to 255 on lircd, and here's what I see: [...] > irw showed nothing from that keypress. Please use the config file from CVS. And do a cvs update. I've added further improvement of the code today. Christoph |
|
From: Blammo <bla...@gm...> - 2005-02-19 22:55:29
|
On Sat, 19 Feb 2005 15:51:09 -0700, Blammo <bla...@gm...> wrote: > Ok, downloaded and compiled and installed.. No diff.. it takes 2-3 > key presses to get through.. Again I DO see the red light flicker on > the USB reciever each time I hit the key. > > So I turned the debug up to 255 on lircd, and here's what I see: > > (this was one DOWN remote-press) Here was a successful "down" decode... after holding down the key for a LONG time watching fails go by.. lircd 0.7.1-CVS: trying "StreamZap" remote lircd 0.7.1-CVS: <s82221 lircd 0.7.1-CVS: sync lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p1536 lircd 0.7.1-CVS: <p1536 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: <s768 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: <s768 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s1536 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p1536 lircd 0.7.1-CVS: <p1536 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s1536 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p1536 lircd 0.7.1-CVS: <p1536 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s1536 lircd 0.7.1-CVS: 1 lircd 0.7.1-CVS: +p1536 lircd 0.7.1-CVS: <p1536 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: +s768 lircd 0.7.1-CVS: <s768 lircd 0.7.1-CVS: +p768 lircd 0.7.1-CVS: 0 lircd 0.7.1-CVS: code: 38d4 lircd 0.7.1-CVS: sum: 21504 lircd 0.7.1-CVS: timeout: 45696 lircd 0.7.1-CVS: found: Down |
|
From: Blammo <bla...@gm...> - 2005-02-19 23:28:33
|
On Sat, 19 Feb 2005 15:55:22 -0700, Blammo <bla...@gm...> wrote: > On Sat, 19 Feb 2005 15:51:09 -0700, Blammo <bla...@gm...> wrote: > > Ok, downloaded and compiled and installed.. No diff.. it takes 2-3 > > key presses to get through.. Again I DO see the red light flicker on > > the USB reciever each time I hit the key. This is the part where I answer my own question. irrecord detected too many "bits" making a correct match a random thing. Use the conf in the lirc/remotes/streamzap directory, and be a happy person.. Here's what my old config had: bits 14 here's what the included one had: bits 6 once I got the debug turned up high enough I could see things like this: 00000000000028d4 00 Down Streamzap 00000000000038d4 00 Down Streamzap which told me it was checking bits it didn't need to.. Dropped down to 6, and it's working like it used to be.. Guess I should have just used the one included with the source in the first place.. |
|
From: <li...@ba...> - 2005-02-20 11:00:41
|
Hi! Blammo "bla...@gm..." wrote: [...] > irrecord detected too many "bits" making a correct match a random > thing. Use the conf in the lirc/remotes/streamzap directory, and be a > happy person.. The number of bits has nothing to do with it. It's the same in both config files. The signal timing is the difference. Christoph |
|
From: Blammo <bla...@gm...> - 2005-02-20 21:43:15
|
The fault was not your config file, it was mine. The config file that irrecord built was for a 13 or 14 bit number. The StreamZap uses 6 bit number, which is reflected properly in any of the config files I've ever gotten via CVS. the results coming from lircd when it was set for 13 or 14 bit number had bits toggling (interference maybe) that had nothing to do with the streamzap. As soon as I had the bitmask right, it works like a CHARM. On 20 Feb 2005 10:17:00 +0100, Christoph Bartelmus <li...@ba...> wrote: > Hi! > > Blammo "bla...@gm..." wrote: > [...] > > irrecord detected too many "bits" making a correct match a random > > thing. Use the conf in the lirc/remotes/streamzap directory, and be a > > happy person.. > > The number of bits has nothing to do with it. It's the same in both > config files. > The signal timing is the difference. > > Christoph > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X