I am hoping that I can receive some help in getting my mceusb receiver to work.
Here is my situation. I am using mythtv; my case came with an integated usb IR receiver and in order to control my STB I purchased a USB-UIRT. I have not been able to get the mceusb receiver to work so far, though the transmitter (USB-UIRT) seems to work.
I have a /dev/lircd and /dev/lircd1 but nothing else. I have tried to create the needed device nodes manually but that does not seem to help, and when I try to test with irw I either get a return to the prompt, when using /dev/lircd1 or no feedback at all when using /dev/lircd. In one of the forums, it was suggested to me that although the lirc_mceusb2 is being loaded, it is not being used, see response from lsmod below:
lsmod | grep lirc
lirc_mceusb2 16900 0
lirc_dev 18248 1 lirc_mceusb2
usbcore 169904 9 lirc_mceusb2,ftdi_sio,usbserial,usbhid,usb_storage,libusual,ehci_hcd,ohci_hcd
I would appreciate your help and I can post additional information if needed.
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
Get latest updates about Open Source Projects, Conferences and News.