From: Patrick Landry <pml4791@ya...> - 2003-04-07 23:15:21
I have an AVerTV Studio Deluxe card and I am having
getting the remote control working under Gentoo Linux.
to use the audiomux=0xff44e parameter when loading
get the sound to behave properly. The problem is that
parameter screws up the remote control. Without the
parameter the remote works just fine. With the
key presses on the remote are not recognized properly.
different keys are being recognized at the same key.
down one key continuously will be received as multiple
of differing keys. The card is being autodetected by
bttv as card=41
and tuner=2. This is with bttv-0.7.96 and
Any help, pointers, guesses will be gratefully
Here are some of the relevant boot messages.
bttv: driver version 0.7.96 loaded
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI
subsystem ID is 1461:0003
bttv0: using: BT878(AVerMedia TVPhone 98)
bttv0: gpio config override: mask=0xffffffff,
bttv0: Avermedia eeprom[0x4803]: tuner=2 radio:yes
bttv0: using tuner=2
lirc_dev: IR Remote Control driver registered, at
lirc_gpio (-1): card type 0x29, id 0x31461
lirc_gpio (0): driver registered
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
Patrick Landry "pml4791@..." wrote:
> I have an AVerTV Studio Deluxe card and I am having trouble
> getting the remote control working under Gentoo Linux.
> I had to use the audiomux=0xff44e parameter when loading bttv to
> get the sound to behave properly. The problem is that
> bttv0: gpio config override: mask=0xffffffff,
You probably want to provide also all other parameters manually as
0xffffffff does not look correct.