i need some help getting my ir receiver to work. i don't know the exact
model name of the receiver, i only can tell that it seems to be a very
simple serial one .
i does work with WinLIRC in "RX Mode", but with LIRC on Linux i don't
see any reaction in the mode2 tool and anywhere else. mode2 starts fine
and then...nothing! ;-)
maybe someone can give me some hints, what i am doing wrong or what
steps follow next?
here's my configuration and some log output.
- elitegroup K7S5A + duron 800
- redhat 8.0
- linux 2.4.22-xfs kernel
- configured with --with-driver=serial
alias char-major-61 lirc_serial
alias lirc_serial irq=4 io=0x3f8
# also tried different values for the following options
#options lirc_serial type=0 irq=4 io=0x3f8 sense=1 softcarrier=0
% lsmod | grep serial
lirc_serial 9248 0 (autoclean)
% dmesg | tail -1
lirc_serial: auto-detected active high receiver
any help is appreciated,