Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
I've got some trouble with the following connection diagram:
Here are some pictures of my version of this plan:
The Problem: I got 5V on the TSOP 1738, but on Pin 1 I have only 1,24V
when I press no key on my Remote Control and 1,08V when I press a key.
Can this be right? The problem is that lirc recieves nothing (checked
Lirc itself starts up fine:
pc-aldi:/# /etc/init.d/lirc start
lirc_serial: auto-detected active high receiver
Starting lirc daemon: lircd.
Thanks for your advice,