I found a protocol builder JP1 file.
>From that I learned that the pulse and space length for header, zero, and
one was different from what mode2 gave me.
I finally got some hex codes for buttons by playing with different
configurations in the "begin remote section"
Right now I am testing the conf file. I get response from the STB now while
sending single commands.
Some times when sending two digits from a script, the box will only react
once. There is a green led
on the front, that turn red when accepting the code.
I am using this shell script:
#!/bin/sh
for digit in $(echo $1 | sed -e 's/./& /g'); do
irsend SEND_ONCE VIP1510 $digit
sleep 0.4
done
Should I try a different sleep time?
Thanks
Joergen
Jørgen Nørgaard wrote:
>
> Hello, I am new to this mailing list.
>
> Does anybody know the protocol of the remote (56 kHz) for the Motorola VIP
> 1510 STB.
>
> I have uploaded af zip archive (VIP1510.zip) containing
> VIP1510_xmode2.png, VIP1510_mode2.txt, and VIP1510_Keycodes.txt
>
> I am on Fedora 9, and have a mceusb2 ir receiver (remote model 1039).
>
> Irrecord records as a RC6, but can not find the toggle bit.
> As you can see in the VIP1510_xmode2.png, the code changes on button
> release.
>
> The VIP1510_Keycodes.txt is the information on button codes, that my IPTV
> provider gave me.
> They do not know the protocol of the remote??!!!
>
> I have been able to record raw codes, but they do not always change
> channel on the STB.
> I have been googling for this remote. Nobody have been able to record
> anything but raw codes for lirc.
> The only files I have found is some JP1 upgrade files: They do not
> indicate any protocol, but use manual settings, which I do not understand.
>
> Joergen
>
>
> http://www.nabble.com/file/p19980431/VIP1510.zip VIP1510.zip
>
>
>
--
View this message in context: http://www.nabble.com/Motorola-VIP-1510-configuration-tp19980431p20213871.html
Sent from the LIRC mailing list archive at Nabble.com.
|
