I've bought a nice HomeTheatre PC with a IR receiver+remote
I have checked the supported remote controls and found the accent remote in
the list of supported remote controls. But when I try to use it (with
lirc_serial) I do not get any signals back. Do I have to use a different
Any help is appreciated
If you want to use it under Windows you have to use a special dll (burst.dll)
with IRassistant. I haven't tried it but the docu to the dll says it :
General burst IR-driver for IRassistant.
Copyright 2000 Antenet Ltd. All rights reserved.
Last modified: 10.2.2000
This driver is used with IR-receivers that transmits bursts of pulses of
It has been tested with the IR-receiver introduced in Finnish MikroBitti
magazine but it
could also work with other IR-receivers that has the same principle.
Due to the type of the IR-receiver every remote control button must be added
"to the memory" before IRassistant can be used with the remote controller.
Notice that all remote controllers may not work with the device and the
Get latest updates about Open Source Projects, Conferences and News.