From: Rafael D. <raf...@gy...> - 2005-05-11 15:55:50
|
-----Original Message----- From: lir...@li... [mailto:lir...@li...] On Behalf Of lir...@li... Sent: Tuesday, May 10, 2005 8:25 PM To: lir...@li... Subject: LIRC-list digest, Vol 1 #2256 - 3 msgs Send LIRC-list mailing list submissions to lir...@li... To subscribe or unsubscribe via the World Wide Web, visit https://lists.sourceforge.net/lists/listinfo/lirc-list or, via email, send a message with subject or body 'help' to lir...@li... You can reach the person managing the list at lir...@li... When replying, please edit your Subject line so it is more specific than "Re: Contents of LIRC-list digest..." Today's Topics: 1. lirc and imon vfd (Martin Spears) 2. RE: lirc and imon vfd (Venky Raju) 3. unsubcribe (Adam Prentice) --__--__-- Message: 1 From: "Martin Spears" <ma...@ko...> To: "Lirc-List" <lir...@li...> Subject: lirc and imon vfd Date: Tue, 10 May 2005 16:34:25 -0400 running gentoo, kernel 2.6.11.5, lirc-0.7.1, with lcdproc-0.4.5.imon. i have the proc running fine. I have tried ever single option i can think of in order to get some response for this IR. lsmod gives me Module Size Used by lirc_imon 14596 0 lirc_dev 15620 1 lirc_imon imon_vfd 9224 1 dmesg gives me /root/imon/imon_vfd.c: Driver for Soundgraph iMON VFD, v0.1a1 /root/imon/imon_vfd.c: Venky Raju <de...@ve...> /root/imon/imon_vfd.c: imon_probe: found IMON device /root/imon/imon_vfd.c: imon_probe: iMON device on usb<4:2> initialized usbcore: registered new driver imon lirc_dev: IR Remote Control driver registered, at major 61 lirc_imon: no version for "lirc_unregister_plugin" found: kernel tainted. /var/tmp/portage/lirc-0.7.1/work/lirc-0.7.1/drivers/lirc_imon/lirc_imon.c: Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3 /var/tmp/portage/lirc-0.7.1/work/lirc-0.7.1/drivers/lirc_imon/lirc_imon.c: Venky Raju <de...@ve...> usbcore: registered new driver lirc_imon but when i try to do an irw i get May 9 15:54:55 redvenom lircd 0.7.1: lircd(imon) ready May 9 15:55:03 redvenom lircd 0.7.1: accepted new client on /dev/lircd May 9 15:55:03 redvenom lircd 0.7.1: could not open /dev/lirc/0 May 9 15:55:03 redvenom lircd 0.7.1: default_init(): No such device May 9 15:55:03 redvenom lircd 0.7.1: caught signal any help would be very greatful. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 5/9/2005 --__--__-- Message: 2 From: "Venky Raju" <de...@ve...> To: "'Lirc-List'" <lir...@li...> Subject: RE: lirc and imon vfd Date: Tue, 10 May 2005 18:16:28 -0500 The driver has loaded fine but does not appear to have bound to device = file /dev/lirc/0 (which you created manually using mknod). Check the minor number in /sys/class/lirc and confirm that it is 0. Do you have an older version of lirc (pre-installed) that was also = modprobed automatically on boot? Venky -----Original Message----- From: Martin Spears [mailto:ma...@ko...]=20 Sent: Tuesday, May 10, 2005 3:34 PM To: Lirc-List Subject: lirc and imon vfd running gentoo, kernel 2.6.11.5, lirc-0.7.1, with lcdproc-0.4.5.imon. i have the proc running fine. I have tried ever single option i can = think of in order to get some response for this IR. lsmod gives me Module Size Used by lirc_imon 14596 0 lirc_dev 15620 1 lirc_imon imon_vfd 9224 1 dmesg gives me /root/imon/imon_vfd.c: Driver for Soundgraph iMON VFD, v0.1a1 /root/imon/imon_vfd.c: Venky Raju <de...@ve...> /root/imon/imon_vfd.c: imon_probe: found IMON device /root/imon/imon_vfd.c: imon_probe: iMON device on usb<4:2> initialized usbcore: registered new driver imon lirc_dev: IR Remote Control driver registered, at major 61 lirc_imon: no version for "lirc_unregister_plugin" found: kernel = tainted. /var/tmp/portage/lirc-0.7.1/work/lirc-0.7.1/drivers/lirc_imon/lirc_imon.c= : Driver for Soundgraph iMON MultiMedian IR/VFD, v0.3 /var/tmp/portage/lirc-0.7.1/work/lirc-0.7.1/drivers/lirc_imon/lirc_imon.c= : Venky Raju <de...@ve...> usbcore: registered new driver lirc_imon but when i try to do an irw i get May 9 15:54:55 redvenom lircd 0.7.1: lircd(imon) ready May 9 15:55:03 redvenom lircd 0.7.1: accepted new client on /dev/lircd May 9 15:55:03 redvenom lircd 0.7.1: could not open /dev/lirc/0 May 9 15:55:03 redvenom lircd 0.7.1: default_init(): No such device May 9 15:55:03 redvenom lircd 0.7.1: caught signal any help would be very greatful. -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.308 / Virus Database: 266.11.7 - Release Date: 5/9/2005 ------------------------------------------------------- This SF.Net email is sponsored by Oracle Space Sweepstakes Want to be the first software developer in space? Enter now for the Oracle Space Sweepstakes! http://ads.osdn.com/?ad_id=3D7393&alloc_id=3D16281&op=3Dclick --__--__-- Message: 3 From: "Adam Prentice" <adv...@li...> To: "'Lirc-List'" <lir...@li...> Subject: unsubcribe Date: Tue, 10 May 2005 19:24:52 -0400 End of LIRC-list Digest |
From: Beau N. <be...@ya...> - 2006-10-12 19:09:45
|
--- lir...@li... wrote: > Send LIRC-list mailing list submissions to > lir...@li... > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/lirc-list > or, via email, send a message with subject or body 'help' to > lir...@li... > > You can reach the person managing the list at > lir...@li... > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of LIRC-list digest..." > > > Today's Topics: > > 1. Re: usb serial (James W. Mills) > 2. Re: (usb) uirt2_raw issues [patch] (Bill Somerville) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 12 Oct 2006 10:05:31 -0700 > From: "James W. Mills" <jm...@av...> > Subject: Re: usb serial > Cc: lir...@li... > Message-ID: <452...@av...> > Content-Type: text/plain; charset=ISO-8859-1 > > brian boyle wrote: > > Hey folks > > > > I have a question about usb serial port adaptors. i just > received > > my shinny new usb to serial port adaptor and plugged it into my > fedora > > core 5 installation. the OS appears to see it and has set it up as > > /dev/ACM0 but i cant figure out how to find the ioport and irq so i > > can use it with lirc. is there another way for this to work with > lirc > > with out knowing the irq or ioport? > > > > when i look in the "ioport" file in the proc folder i dont see > > anything that says ACM or anything like it. so i am sure i am > missing > > something. > > > > can you help me out? > > > > Thanks. > > > > > > Brian. > > I *think* that you might not be able to use lirc with a USB to serial > adapter. I recently had an IR project to do, and this is the first > route that I took since my laptop had no serial port. However, after > much flailing, I found the following quote on the lirc.org website: > > (http://lirc.org/faq.html) > """ > Can I use a home-brew LIRC receiver with a Serial to USB adapter? > > No, this won't work. But there is a project working on a dedicated > USB > transceiver <http://tusb3210.sourceforge.net>. Using an Irman with > USB > adapter should work though. > > """ > > I ended up using a PCMCIA serial adapter with a home-brew, then > moving > to an Irtrans (http://www.irtrans.de/en/). They have a great lircd > interface, and I did not even have to change my lirc client calls. > > Hope this helps, > ~james > > > > ------------------------------ > > Message: 2 > Date: Thu, 12 Oct 2006 18:16:17 +0100 > From: Bill Somerville <bso...@me...> > Subject: Re: (usb) uirt2_raw issues [patch] > To: "John H." <mis...@gm...> > Cc: Wilfried Weissmann <Wil...@gm...>, > lir...@li... > Message-ID: <1160673377.30374.110.camel@localhost.localdomain> > Content-Type: text/plain > > On Wed, 2006-10-11 at 14:51 -0400, John H. wrote: > > can you explain what you mean by "covering up the module window > while > > the client is connecting" means, and what exactly I need to try? > > Firstly I noticed that the activity LED was flashing continuously > with > no signal (if you don't get that then you probably don't have the > same > problem), I tried putting my finger over the black window at the > front > of the module at the critical moment. Later I took it apart and stuck > black insulating tape over the offending receiver. It still seems to > work OK with the tape! The device I covered was not one of the > transmitters. > > I have many USB-UIRT modules here and they all behave the same :-( > > > > > On 10/11/06, Bill Somerville <bso...@me...> wrote: > > > I had similar problems with USB-UIRT an found that covering up > the > > > module window while the client is connecting (irsend in your > case) fixed > > > the problem. I am suspicious that one of the sensors is too > sensitive > > > (the long range one I think). The checksum error is the one that > seems > > > to kill it. I have spoken to the USB-UIRT supplier and was told > it is > > > probably due to poor power supply regulation or stray IR signals > - I'm > > > not so sure :-( > > > > > > I haven't had time to look at the code to see if the checksum > error can > > > be avoided/ignored. > > > > > -- > > Bill Somerville > > > > > This message has been scanned by MailController - > www.MailController.altohiway.com > > > > ------------------------------ > > ------------------------------------------------------------------------- > Using Tomcat but need to do more? Need to support web services, > security? > Get stuff done quickly with pre-integrated technology to make your > job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache > Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > End of LIRC-list Digest, Vol 5, Issue 24 > **************************************** > |
From: al g. <pet...@gm...> - 2007-01-01 15:38:44
|
From: Alex L. <la...@ho...> - 2007-01-22 05:07:24
|
>From: lir...@li... >Reply-To: lir...@li... >To: lir...@li... >Subject: LIRC-list Digest, Vol 8, Issue 37 >Date: Sun, 21 Jan 2007 12:03:48 -0800 > >Send LIRC-list mailing list submissions to > lir...@li... > >To subscribe or unsubscribe via the World Wide Web, visit > https://lists.sourceforge.net/lists/listinfo/lirc-list >or, via email, send a message with subject or body 'help' to > lir...@li... > >You can reach the person managing the list at > lir...@li... > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of LIRC-list digest..." > > >Today's Topics: > > 1. Re: Lirc won't compile with 2.6.20-rc4 (Vassilis Virvilis) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Sun, 21 Jan 2007 15:30:37 +0200 >From: Vassilis Virvilis <va...@ii...> >Subject: Re: Lirc won't compile with 2.6.20-rc4 >To: arandamandi <mes...@ti...> >Cc: lir...@li... >Message-ID: <45B...@ii...> >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >arandamandi wrote: > > > > > File to patch: drivers/lirc_atiusb/lirc_atiusb.c > > patching file drivers/lirc_atiusb/lirc_atiusb.c > > Hunk #1 FAILED at 11. > > Hunk #2 FAILED at 68. > > Hunk #3 FAILED at 93. > > Hunk #4 FAILED at 132. > > Hunk #5 FAILED at 154. > > Hunk #6 FAILED at 184. > > Hunk #7 FAILED at 222. > > Hunk #8 FAILED at 386. > > Hunk #9 FAILED at 524. > > Hunk #10 FAILED at 616. > > Hunk #11 FAILED at 655. > > Hunk #12 FAILED at 679. > > Hunk #13 FAILED at 998. > > Hunk #14 FAILED at 1013. > > patch unexpectedly ends in middle of line > > Hunk #15 FAILED at 1026. > > 15 out of 15 hunks FAILED -- saving rejects to file > > drivers/lirc_atiusb/lirc_atiusb.c.rej > > > >Hm.. my patch is against lirc-0.8.0 of debian sources. I will >try to compile against current cvs and resubmit. > >Thanks for trying this. > > .bill > > > >------------------------------ > >------------------------------------------------------------------------- >Take Surveys. Earn Cash. Influence the Future of IT >Join SourceForge.net's Techsay panel and you'll get the chance to share >your >opinions on IT & business topics through brief surveys - and earn cash >http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > >End of LIRC-list Digest, Vol 8, Issue 37 >**************************************** _________________________________________________________________ Buy what you want when you want it on Sympatico / MSN Shopping http://shopping.sympatico.msn.ca/content/shp/?ctId=2,ptnrid=176,ptnrdata=081805 |
From: Howard B. <ho...@in...> - 2010-10-17 22:00:21
|
unsubscribe |
From: Christ S. <aa...@gm...> - 2010-10-18 00:08:03
|
You have been succussfully unsubscribed from the-- I can't do it. you sent the mail to the wrong address. try going to the lirc website and find the list manager address, not the list address. On 10/17/2010 2:38 PM, Howard Betsworth wrote: > > unsubscribe > > > ------------------------------------------------------------------------------ > Download new Adobe(R) Flash(R) Builder(TM) 4 > The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly > Flex(R) Builder(TM)) enable the development of rich applications that run > across multiple browsers and platforms. Download your free trials today! > http://p.sf.net/sfu/adobe-dev2dev |
From: Paul M. <pau...@us...> - 2010-10-18 00:35:14
|
Am Sonntag, den 17.10.2010, 17:07 -0700 schrieb Christ Schlacta: > You have been succussfully unsubscribed from the-- I can't do it. > you sent the mail to the wrong address. try going to the lirc website > and find the list manager address, not the list address. For Mailman setup the list robot/daemon usually accepts commands to <lis...@ex...>. Thanks, Paul |
From: Greg O. <oli...@gm...> - 2010-10-18 00:52:05
|
On Sun, Oct 17, 2010 at 7:35 PM, Paul Menzel <pau...@us...> wrote: > Am Sonntag, den 17.10.2010, 17:07 -0700 schrieb Christ Schlacta: >> You have been succussfully unsubscribed from the-- I can't do it. >> you sent the mail to the wrong address. try going to the lirc website >> and find the list manager address, not the list address. > > For Mailman setup the list robot/daemon usually accepts commands to > <lis...@ex...>. > > |
From: Greg O. <oli...@gm...> - 2010-10-18 00:53:16
|
On Sun, Oct 17, 2010 at 7:51 PM, Greg Oliver <oli...@gm...> wrote: > On Sun, Oct 17, 2010 at 7:35 PM, Paul Menzel > <pau...@us...> wrote: >> Am Sonntag, den 17.10.2010, 17:07 -0700 schrieb Christ Schlacta: >>> You have been succussfully unsubscribed from the-- I can't do it. >>> you sent the mail to the wrong address. try going to the lirc website >>> and find the list manager address, not the list address. >> >> For Mailman setup the list robot/daemon usually accepts commands to >> <lis...@ex...>. Oops Welcome to the LIR...@li... mailing list! To post to this list, send your email to: lir...@li... General information about the mailing list is at: https://lists.sourceforge.net/lists/listinfo/lirc-list If you ever want to unsubscribe or change your options (eg, switch to or from digest mode, change your password, etc.), visit your subscription page at: https://lists.sourceforge.net/lists/options/lirc-list/<email> You can also make such adjustments via email by sending a message to: LIR...@li... with the word `help' in the subject or body (don't include the quotes), and you will get back a message with instructions. You must know your password to change your options (including changing the password, itself) or to unsubscribe. |
From: <Gav...@st...> - 2012-04-25 07:50:20
|
unsubscribe Regards, Gavin Whitehead Technical Consultant (Messaging) Steria (www.steria.com\uk) Switchboard:0870 600 4466 Direct: 01442 884883 Mobile:07966 824883 Think before you print - Steria is committed to supporting a sustainable world Think before you print - Steria is committed to supporting a sustainable world and is Certified Carbon Neutral for Flight and Fleet Travel This email originates from Steria*. It, and any attachments, may contain confidential information and may be subject to copyright or other intellectual property rights. It is only for the use of the addressee(s). You may not copy, forward, disclose, save or otherwise use it in any way if you are not the addressee(s) or responsible for delivery. If you receive this email by mistake, please advise the sender and cancel it immediately. Steria may monitor the content of emails within its network to ensure compliance with its policies and procedures. Any email is susceptible to alteration and its integrity cannot be assured. Steria shall not be liable if the message is altered, modified, falsified, or edited. _____________________________________________________ * Steria Limited, number 4077975; Steria Recruitment Limited, number 1437998. Registered in England and Wales; registered office Three Cherry Trees Lane, Hemel Hempstead, Hertfordshire HP2 7AH |
From: Bernd K. <ma...@bk...> - 2016-08-21 19:21:16
|