i just checked again, it is /ttyAMC0  however when i do a dmesg |grep acm i ge tthe following.

drivers/usb/class/cdc-acm.c: This device cannot do calls on its own. It is no modem.
cdc_acm 1-2:1.0: ttyACM0: USB ACM device
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters

so i am at a loss.

On 10/12/06, John H. <mistamaila@gmail.com> wrote:
are you sure it didn't go to /dev/ttyUSB0?  I thought acm was for the modem.

I did this and just specified, when i finally ran configure, to use
the device /dev/ttyUSB0, I don't think I even mentioned irqs.

you can try

--with-port=none \
--with-irq=none \
--with-tty=/dev/ttyUSB0 \

On 10/12/06, brian boyle < homepvr@gmail.com> wrote:
> Hey folks
>    I have a question about usb serial port adaptors. i just received my
> shinny new usb to serial port adaptor and plugged it into my fedora core 5
> installation. the OS appears to see it and has set it up as /dev/ACM0 but i
> cant figure out how to find the ioport and irq so i can use it with lirc. is
> there another way for this to work with lirc with out knowing the irq or
> ioport?
>    when i look in the "ioport" file in the proc folder i dont see anything
> that says ACM or anything like it. so i am sure i am missing something.
>    can you help me out?
> Thanks.
>  Brian.
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642