I'm trying to get Asus DH receiver/remote working under lircd

 i've done

apt-get install lirc lirc-modules-source linux-kbuild-2.6.26 kernel-package

dmesg shows

usb 3-2: new low speed USB device using ohci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
hiddev96hidraw2: USB HID v1.10 Device [T-wins ASUS DH Remote] on usb-0000:00:01.1-2
usb 3-2: New USB device found, idVendor=1130, idProduct=cc00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: ASUS DH Remote
usb 3-2: Manufacturer: T-wins

I understand I need to edit /etc/lirc/hardware.conf and think the below is right? but don't have info to add to DEVICE=

i've tried /dev/hidraw2

# /etc/lirc/hardware.conf
#
# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
START_LIRCMD=true

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER="AsusDH"
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE="/dev/hidraw2"
MODULES=""

# Default configuration files for your hardware if any
LIRCD_CONF="/etc/lircd.conf"
#LIRCMD_CONF=""


/etc/lirc/lircd.conf i've got

#
# contributed by Bernhard Frauendienst <lirc|nospam.obeliks.de>
#
# brand: Asus
# model: Asus DH Deluxe IR
#

begin remote

name AsusDH
bits 32
pre_data_bits 32
pre_data 0xFF000000
post_data_bits 0

begin codes
POWER 0x01
QUICK_POWER 0x02
NOISE_OFF 0x03
WIFI 0x04
AP_LAUNCH 0x05
MAXIMIZE 0x06
PLUS 0x07
REV 0x08
PLAY/PAUSE 0x09
FWD 0x0A
MINUS 0x0B
end codes

end remote

i've tried

/etc/init.d/lirc restart
Stopping lirc daemon: irexec lircmd lircd.
Starting lirc daemon: lircd lircmd.

irw


mode2
mode2: error opening /dev/lirc
mode2: No such file or directory

cat /dev/hidraw2
(no output when buttons pressed)

if anyone can help me get this working it would be greatly appreciated.