Hi all,

I've still been trying to get the inluded remote with my USB DVB-T Tuner working. After upgrading to Ubuntu 8.04 (hardy) I can now see the remote when I do a "cat /proc/bus/input/devices":

I: Bus=0003 Vendor=185b Product=1e78 Version=0100
N: Name="IR-receiver inside an USB DVB receiver"
P: Phys=usb-0000:00:02.1-4/ir0
S: Sysfs=/devices/pci0000:00/0000:00:02.1/usb1/1-4/input/input7
U: Uniq=
H: Handlers=kbd event7
B: EV=3
B: KEY=10afc332 2842845 0 0 0 4 80018000 2180 40000801 9e96c0 0 800200 ffc

However, I get now output running irrecord:

matthew@matthew-desktop:~$ sudo irrecord -H dev/input -d /dev/input/event7 lircd.conf

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)

irrecord: initializing '/dev/input/event7'
This program will record the signals from your remote control
and create a config file for lircd.


Press RETURN to continue.

Hold down an arbitrary button.
irrecord: gap not found, can't continue
irrecord: closing '/dev/input/event7'

Likewise, if I start lirc with the following: "sudo /usr/sbin/lircd -H dev/input -d /dev/input/event7 -n" and then run irw, it will run fine but there will be no output at all.

Any ideas?



Matthew Vermeulen
MatthewV @ irc.freenode.net