Hi everybody,

I've a Knoppix 5.1.1 system with Hauppauge PVR 350 card. I've got that card
working with ivtv driver but not the remote control. I've installed LIRC
debian package and copied the hauppauge lirc conf file to
/etc/lirc/lircd.conf. After I start the lirc daemon and modprobe'd the
lirc_i2c module, irw can read the remote control buttons and prints it out
on the stdout but I don't see any impact on the tv card. irw recognizes the
buttons that I press on the remote control. I'm just wondering what am I
missing here. If it helps, here's the ivtv log:


ul 17 23:37:42 linuxdesktop kernel: ivtv: ==================== START INIT
IVTV ====================
Jul 17 23:37:42 linuxdesktop kernel: ivtv: version 0.10.3 (tagged release)
loading
Jul 17 23:37:42 linuxdesktop kernel: ivtv: Linux version: 2.6.19.7 SMP
preempt mod_unload 386 REGPARM
Jul 17 23:37:42 linuxdesktop kernel: ivtv: In case of problems please
include the debug info between
Jul 17 23:37:42 linuxdesktop kernel: ivtv: the START INIT IVTV and END INIT
IVTV lines, along with
Jul 17 23:37:42 linuxdesktop kernel: ivtv: any module options, when mailing
the ivtv-users mailinglist.
Jul 17 23:37:42 linuxdesktop kernel: ACPI: PCI Interrupt 0000:03:02.0[A] ->
GSI 18 (level, low) -> IRQ 20
Jul 17 23:37:42 linuxdesktop kernel: rt61 1.1.0 Beta 2 CVS
http://rt2x00.serialmonkey.com
Jul 17 23:37:42 linuxdesktop kernel: RT61: Vendor = 0x1814, Product = 0x0301
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Autodetected Hauppauge card
(cx23415 based)
Jul 17 23:37:42 linuxdesktop kernel: ACPI: PCI Interrupt 0000:03:03.0[A] ->
GSI 19 (level, low) -> IRQ 23
Jul 17 23:37:42 linuxdesktop kernel: Loading module: rt61pci - CVS (N/A) by
http://rt2x00.serialmonkey.com.
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: loaded
v4l-cx2341x-enc.fwfirmware (376836 bytes)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: loaded
v4l-cx2341x-dec.fwfirmware (262144 bytes)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Encoder revision: 0x02060039
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Decoder revision: 0x02020023
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: Hauppauge model 48132,
rev K268, serial# 8611216
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: tuner model is LG TAPE
H001F MK3 (idx 68, type 47)
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: TV standards NTSC(M)
(eeprom 0x08)
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: audio processor is
MSP4448 (idx 27)
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: decoder processor is
SAA7115 (idx 19)
Jul 17 23:37:42 linuxdesktop kernel: tveeprom 1-0050: has radio, has IR
remote
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Autodetected Hauppauge WinTV
PVR-350
Jul 17 23:37:42 linuxdesktop kernel: tuner 1-0043: chip found @ 0x86 (ivtv
i2c driver #0)
Jul 17 23:37:42 linuxdesktop kernel: tda9887 1-0043: tda988[5/6/7] found @
0x43 (tuner)
Jul 17 23:37:42 linuxdesktop kernel: tuner 1-0061: chip found @ 0xc2 (ivtv
i2c driver #0)
Jul 17 23:37:42 linuxdesktop kernel: saa7115 1-0021: saa7115 found
(1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
Jul 17 23:37:42 linuxdesktop kernel: msp3400 1-0040: MSP4448G-B3 found @
0x80 (ivtv i2c driver #0)
Jul 17 23:37:42 linuxdesktop kernel: msp3400 1-0040: MSP4448G-B3 supports
radio, mode is autodetect and autoselect
Jul 17 23:37:42 linuxdesktop kernel: i2c_adapter i2c-1: Client creation
failed at 0x44 (-1)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device video0 for
encoder MPEG (4 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device video32 for
encoder YUV (2 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device vbi0 for
encoder VBI (1 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device video24 for
encoder PCM audio (1 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device radio0 for
encoder radio
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device video16 for
decoder MPEG (1 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device vbi8 for
decoder VBI (1 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device vbi16 for
decoder VOUT
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Registered device video48 for
decoder YUV (1 MB)
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: loaded
v4l-cx2341x-init.mpgfirmware (155648 bytes)
Jul 17 23:37:42 linuxdesktop kernel: tuner 1-0061: type set to 47 (LG NTSC
(TAPE series))
Jul 17 23:37:42 linuxdesktop kernel: ivtv0: Initialized Hauppauge WinTV
PVR-350, card #0
Jul 17 23:37:42 linuxdesktop kernel: ivtv: ==================== END INIT
IVTV ====================


When I say lircd --driver=help, here's the output:

Driver `help' not supported.
Supported drivers:
alsa_usb
atilibusb
audio_alsa
bte
bw6130
dvico
creative
creative_infracd
default
dev/input
dsp
ea65
irman
livedrive_midi
livedrive_seq
logitech
mp3anywhere
mouseremote
mouseremote_ps2
null
pcmak
pinsys
pixelview
silitek
tira
udp
uirt2
uirt2_raw

I don't see hauppauge driver in that list. Doesn't lirc debian package
doesn't have hauppauge driver support built-in ?? Btw, my kernel version is
2.6.19.

Appreciate any help.


Sanjay.