Thanks. I'll try it.
Try placing a peice of scotch tape over the IR reciever.
This tip has been floating around on the AVSforum for some time. While it
doesn't work for everybody it did solve a similiar problem for me.
On Wednesday 25 June 2008, Larry K wrote:
> Thanks for the reply. Can you point me to the plasma-friendly IR receiver?
> Where did you find it?
> On Wed, Jun 25, 2008 at 8:56 AM, Matt Nelson <firstname.lastname@example.org> wrote:
> > I had this problem on my dad's television, as well as mine. For my dad I
> > actually bought a different IR reciever that stated that it was designed
> > work with plasma tv's, and it worked great. For me I was able to put my
> > reciever about 3 inches below and 6 inches back from the front of the
> > tv and this worked great for me, but when I was originally on the same
> > or in front of the tv screen it was all sorts of messed up.
> > Hope this helps,
> > -Matt
> > On Tue, Jun 24, 2008 at 7:15 PM, Larry K <email@example.com> wrote:
> >> I have a Myth Frontend that has been happily working over S-Video to a
> >> Panasonic CRT TV. Recently, I bought a new Panasonic 50" 50PX77U plasma,
> >> my intent is to connect this display using DVI-HDMI, rather than S-Video,
> >> for obvious reasons.
> >> Anyway, since I have not yet configured xorg.conf for DFP output, I
> >> plugged the S-Video cable into the new plasma as an interim measure.
> >> did this, lirc started behaving oddly. It just does not respond to my
> >> remote, and when I run irw to test it out, it very rarely (if ever) picks
> >> the command. If I simply unplug the S-Video cable from the plasma and
> >> it back on the old 27" CRT, everything returns to normal. Here, irw
> >> each and every command flawlessly. Mythtv responds flawlessly to my
> >> control as well.
> >> I have come to realize that the plasma TV is creating sufficient infrared
> >> interference to disrupt my remote control operation.
> >> Any thoughts on what can I do to correct this? Some sort of filter?
> >> Should I try a different IR receiver? I use this one now:
> >> http://saturnpc.com/index.php?main_page=product_info&products_id=1
> >> Would an RF remote control be a good solution? Any particular model?
> >> sure how well this works with lirc, but I have read that it does in fact
> >> work (it does seem curious that RF works with lirc since lirc stands for
> >> linux infrared :) )
> >> Larry
> >> -------------------------------------------------------------------------
> >> Check out the new SourceForge.net Marketplace.
> >> It's the best place to buy or sell services for
> >> just about anything Open Source.
> >> http://sourceforge.net/services/buy/index.php