I bought a creative labs Audigy 4 (not platinum) and included with it was a remote and a usb remote receiver.  I seem to be having problems getting lirc to work with this device as it doesn't seem to recognize it.  The device itself creates a device file /dev/usb/hiddev0 and if I type 'cat /dev/usb/hiddev0' and aim the remote at it and press buttons I get a response.  The only driver I could find information that uses that device is the dvico driver, but if I use that driver, start the lircd daemon and type irw to test it, I get nothing.  Information on the other creative remote receivers indicates that they're connected directly to the soundcard, but that is not true in my case.  Here is the information I have about the receiver and remote.

Printed on the bottom of the receiver:
3139 228 65171


lsusb output:
Bus 003 Device 002: ID 041e:3100 Creative Technology, Ltd

cat /proc/bus/usb/devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=041e ProdID=3100 Rev= 1.01
S:  Manufacturer=Philips Electronics - RCS Singapore
S:  Product=Creative USB IR Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

Linux Distribution is Gentoo 2004.1
uname -a output is:

Linux mage 2.6.13-gentoo-r2 #3 Sat Nov 26 10:42:59 CST 2005 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux

The remote is listed as an RM-1500 and has no other information on it.

/dev/hiddev support is on.

Any suggestions on where to look or what to do would be greatly appreciated.