Hi all,

I've been following various HowTos trying to get my MCE remote working, but still no luck.
The MCE remote came with an HP Media Center PC m7277c

I'm compiling lirc-8.0.0 from source.

./setup.sh, I choose USB, and (h) - MCE new version.
make; make install
sudo modprobe lirc_mceusb2
sudo lircd
sudo irw

I start pressing buttons on my remote, and nothing happens!  Can anyone tell me where I'm going wrong?

Here is my lsusb if it helps:
erik@turbo:/usr/src/lirc-0.8.0$ lsusb
Bus 005 Device 002: ID 03f0:1424 Hewlett-Packard
Bus 005 Device 006: ID 0fca:0001 Research In Motion, Ltd. Blackberry Handheld
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp.
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 006: ID 03f0:0b0c Hewlett-Packard
Bus 002 Device 004: ID 03f0:0917 Hewlett-Packard
Bus 002 Device 002: ID 046d:c50b Logitech, Inc. Cordless Desktop Optical
Bus 002 Device 007: ID 09ae:2005 Tripp Lite
Bus 002 Device 005: ID 0471:0815 Philips <== THIS IS THE IR RECIEVER
Bus 002 Device 003: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 001: ID 0000:0000

Thanks for your help!