Thank you very much! I think I have got it. I look this tutorial: http://mythtv.org/wiki/LIRC_on_Debian_Etch

I build the modules from kernel, I read with irrecord and this is the result:


# cat /tmp/lircd.conf

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.3(default) on Thu Aug 20 18:27:23 2009
#
# contributed by
#
# brand:                       /tmp/lircd.conf
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  /tmp/lircd.conf
  bits           12
  flags SPACE_ENC|CONST_LENGTH
  eps            30
  aeps          100

  header       2406   568
  one          1217   572
  zero          620   572
  gap          44684
  toggle_bit_mask 0x0

      begin codes
          up                       0x43A
          down                     0xC3A
          left                     0x47A
          right                    0x87A
          enter                    0x8BA
          volup                    0x490
      end codes

end remote

I am connect from ssh and my father is pressing the remote buttons, when I arrived to home I will try to configure all buttons.

I have some questions:

1. When I build the modules I must select some drivers, as it puts on the tutorial I select gpio, i2c, mceusb and mceusb2. That correct? I must select more/less drivers?

2. After select driver i have thoose screen, and I select "Standard" and "Other", is correct?

   http://i27.tinypic.com/140w3f5.png
   http://i28.tinypic.com/30rraiw.png

3. The lircd.conf file is correct?

4. Where can I send the full lircd.conf to make easyer to other people?

Thank you very much.

2009/8/19 Jarod Wilson <jarod@wilsonet.com>
On Aug 19, 2009, at 3:32 PM, Josu Lazkano wrote:

> Thanks again. I try but nothing:
>
> # modinfo lirc_mceusb2
> modinfo: could not find module lirc_mceusb2
>
> # ls -l /dev/ | grep lirc
> (nothing)

Won't be anything, because you apparently don't have any lirc kernel
modules available.

> And when I try to restart the service, I have this:
>
> # /etc/init.d/lirc restart
> Stopping lirc daemon: irexec lircmd lircd.
> ##################################################
> ## LIRC IS NOT CONFIGURED                       ##
> ##                                              ##
> ## read /usr/share/doc/lirc/html/configure.html ##
> ##################################################
> Additional hint: Either /etc/lirc/lircd.conf or
>  /etc/lirc/hardware.conf doesn't exist or either
>  of the two has the string UNCONFIGURED in it at
>  some important place. Try: 'dpkg-reconfigure lirc'
> Starting lirc daemon:.
>
> I must compile the lirc software from latest version?

I believe there's some sort of lirc modules meta-package or source
package in Ubuntu that builds the kernel modules using dkms, not sure
if the same exists for Debian. Installing from cvs or the latest lirc
tarball are both options too though. You definitely need the kernel
modules in place before you worry about configuring lirc, or there
won't be any way to talk to the receiver.

--
Jarod Wilson
jarod@wilsonet.com




------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now.  http://p.sf.net/sfu/bobj-july



--
Josu Lazkano