Ok, well, from those pic's it;s quite obviously noting at all like the dvico model, apart from the fact that the symptoms are the same as I got when I was trying to get my DViCO remote to work initially.....
(1) it's USB
(2) it's detected by linux as a 'hiddev' device (human interface device)  - shows USB reciever hardware is OK.
(3) cat /dev/usb/hiddev0 gives binary data on remote key press  - shows remote transmitter hardware is OK
 
I'd try using irrecord and see if you can get it to create a config file... and if not, then get the CVS version of irrecord and try again... finially, do what I did, and hack the irrecord tool with a dogied-up version of the devinput.c  (or similar driver file)- which you'll have to mess-with yourself to get it working.   If you get it working (whick hopefully you will eventually), sent the changes and/or config file to the list and christoph, and he'll hopefully be able to add support to lircd for everyone else in the future who has one of those remotes.   :-)
 
Buzz.


From: lirc-list-admin@lists.sourceforge.net [mailto:lirc-list-admin@lists.sourceforge.net] On Behalf Of John Porterfield
Sent: Friday, 16 December 2005 11:34 PM  
To: lirc-list@lists.sourceforge.net
Subject: Re: What driver do I use for this remote



On 12/15/05, Buzz <buzz@oska.com> wrote:
message I get:
"The File You Are Looking For Is Inaccessible."


From: lirc-list-admin@lists.sourceforge.net [mailto:lirc-list-admin@lists.sourceforge.net] On Behalf Of John Porterfield
Sent: Thursday, 15 December 2005 9:29 PM
To: lirc-list@lists.sourceforge.net
Subject: [Norton AntiSpam] What driver do I use for this remote

I tried the dvico drivers and it didn't work, this the top and bottom of the receiver that I have.
http://pg.photos.yahoo.com/ph/ycarusbog/detail?.dir=/b582&.dnm=a9b8.jpg&.src=ph
http://pg.photos.yahoo.com/ph/ycarusbog/detail?.dir=/b582&.dnm=d98a.jpg&.src=ph
Ack, sorry about that, you can go here http://photos.yahoo.com/ycarusbog and the pictures are on there.