if it looks like these, it's a DViCO MCE remote, which is the "newer" dvico remote.

Try taking this file/link and removing the first two 'begin remote" sections
entirely and try it : ( http://cvs.sourceforge.net/viewcvs.py/lirc/lirc/remotes/dvico/lircd.conf.fusionHDTV?view=markup )
snip from earlier email to the list:
> The link that Christoph provided actually contains 3 (THREE!) different
> configs for DViCO slimline/MCE remotes.   scroll-down.  :-)
> The first "begin remote" stanza (labeled 'DVICO") is for the
> slimline/original remote, and was created by a guy called Chris Pascoe who
> lives just across town from me.
> The second and third "begin remote" stanza's are for the "chunky" MCE
> remote.   The second is a very "raw" config for MCE who's origin i'm not
> aware of, and may/may not work - YMMV.
> The third "begin remote" stanza was created by me and my MCE remote (with
> christoph's and others help to get a patch into irrecord so that it would
> create it properly) , and has been used on at least 3 different MCE remotes
> that I'm personally aware of, and it works perfectly.

From: lirc-list-admin@lists.sourceforge.net [mailto:lirc-list-admin@lists.sourceforge.net] On Behalf Of John Porterfield
Sent: Monday, 12 December 2005 12:51 AM
To: lirc-list@lists.sourceforge.net
Subject: Creative USB remote receiver

I bought a creative labs Audigy 4 (not platinum) and included with it was a remote and a usb remote receiver.  I seem to be having problems getting lirc to work with this device as it doesn't seem to recognize it.  The device itself creates a device file /dev/usb/hiddev0 and if I type 'cat /dev/usb/hiddev0' and aim the remote at it and press buttons I get a response.  The only driver I could find information that uses that device is the dvico driver, but if I use that driver, start the lircd daemon and type irw to test it, I get nothing.  Information on the other creative remote receivers indicates that they're connected directly to the soundcard, but that is not true in my case.  Here is the information I have about the receiver and remote.

Printed on the bottom of the receiver:
3139 228 65171


lsusb output:
Bus 003 Device 002: ID 041e:3100 Creative Technology, Ltd

cat /proc/bus/usb/devices output:
T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=041e ProdID=3100 Rev= 1.01
S:  Manufacturer=Philips Electronics - RCS Singapore
S:  Product=Creative USB IR Receiver
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=00 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms

Linux Distribution is Gentoo 2004.1
uname -a output is:

Linux mage 2.6.13-gentoo-r2 #3 Sat Nov 26 10:42:59 CST 2005 i686 AMD Athlon(tm) XP 2400+ AuthenticAMD GNU/Linux

The remote is listed as an RM-1500 and has no other information on it.

/dev/hiddev support is on.

Any suggestions on where to look or what to do would be greatly appreciated.