Bingo.  Thanks all for your help - the new config file did the trick!

According to irw - all the buttons work and generate the correct button output!  Add me to the other three successfully working MCE remotes on dvico cards and excuse my ignorance...

Nick

Quoting Buzz <buzz@oska.com>:



> Nick,
>
> The link that Christoph provided actually contains 3 (THREE!) different
> configs for DViCO slimline/MCE remotes.   scroll-down.  :-)
>
> The first "begin remote" stanza (labeled 'DVICO") is for the
> slimline/original remote, and was created by a guy called Chris Pascoe who
> lives just across town from me.
> The second and third "begin remote" stanza's are for the "chunky" MCE
> remote.   The second is a very "raw" config for MCE who's origin i'm not
> aware of, and may/may not work - YMMV.
> The third "begin remote" stanza was created by me and my MCE remote (with
> christoph's and others help to get a patch into irrecord so that it would
> create it properly) , and has been used on at least 3 different MCE remotes
> that I'm personally aware of, and it works perfectly.
>
> Try taking that file/link and removing the first two 'begin remote" sections
> entirely and try it then. (
> http://cvs.sourceforge.net/viewcvs.py/lirc/lirc/remotes/dvico/lircd.conf.fus
> ionHDTV?view=markup )
>
> Just to make sure we are on the same page..... my DViCO "Fusion MCE" Remote
> and USB dongle look like the ones in these pictures - here's hoping yours
> does too!:
> http://www.pcalchemy.com/images/dvico/fusionhdtv5-gold/fusionhdtv5-gold.jpg
> http://www.eyo.com.au/img/ups%2Ckvm%2Cusb/hdtv5remote.jpg
> <http://www.pcalchemy.com/images/dvico/fusionhdtv5-gold/fusionhdtv5-gold-144
> x108.jpg>
>
>
> David B.
>
>
>  _____
>
> From: lirc-list-admin@lists.sourceforge.net
> [mailto:lirc-list-admin@lists.sourceforge.net] On Behalf Of Nick Bradford
> Sent: Tuesday, 6 December 2005 9:28 AM
> To: Christoph Bartelmus
> Cc: lirc-list@lists.sourceforge.net
> Subject: Re: Unable to get UltraView (Dvico ) remote working
>
>
> Thanks for the response Christoph.  The config you note is included with the
> source for lirc and is what I tried as a first step to get going.  It is
> definately the config for the slimline remote, which I do not have (and does
> not work with the remote I do have)
>
> I have enabled debug during configuration and get what looks like useful
> data being dumped with each button push, however, I dont know how to turn
> that into a useful configuration file manually. (Should I be concerned about
> a message that is also being dumped as part of the debug output indicating
> something like 'Decoding of all remotes failed' - even though there are also
> unique debug values corresponding with different buttons being pushed being
> displayed.)
>
> TIA
> N
>
> Christoph Bartelmus wrote:
>
> Hi!
>
>
>
> Nick Bradford "nbradford@optushome.com.au"
> <mailto:nbradford@optushome.com.au>  wrote:
>
> [...]
>
>
>
> I am trying to get the supplied UltraView remote working on the frontend.
>
>
>
> I am led to believe that the Ultraview / Dvico cards are/were offered
>
> with two remotes.  A slimish one, and a 'chunky' one.  I have the chunky
>
> one.  I have read (perhaps erroneously) that this is an 'MCE' remote.
>
> They appear to use the same USB receiver.
>
>
>
>
>
> [...]
>
>
>
> Sorry for the long post, but better too much info than too little I
>
> spose... Can anyone help me here?  Does it sound like just a wrong
>
> lirc.conf file or something strange my remote is doing?
>
>
>
>
>
> Try this config file:
>
> http://cvs.sourceforge.net/viewcvs.py/lirc/lirc/remotes/dvico/
>
> lircd.conf.fusionHDTV?rev=1.3&view=markup
>
>
>
> If this does not help, you will have to create a config file manually by
>
> compiling lircd with debug code and looking through the log files.
>
>
>
> Christoph
>
>
>
>
>
> -------------------------------------------------------
>
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
>
> for problems?  Stop!  Download the new AJAX search engine that makes
>
> searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
>
> http://ads.osdn.com/?ad_id=7637
> <http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click>
> &alloc_id=16865&op=click
>
>
>
>
>
>