Re: [Linwizard-users] [Linwizard-devel] LCD detection testing

[Henk M. <h.h...@gm...>]

OK,

I tried it on a Qtek S200 "prophet"

Regards,

Henk

On 10/16/2010 09:12 PM, Alistair Buxton wrote:
> Hi,
>
> Thanks to everyone who came to our sprint and tested things. We got a
> basic kernel booting on several platforms.
>
> After looking at the results I started to look at the LCD detection
> code. I would like to ask everyone to run this test and send me the
> results.
>
> I need testers with any omap7xx phone. You only need to run a haret
> script and mail me the output, no kernel boot in necessary. The test
> scripts are here:
>
> http://al.robotfuzz.com/~al/htc/lcd1.zip
>
> You need a modified version of haret which is included. Unpack the zip
> to the phone's internal memory and run haret. Press the "boot" button
> like normal. It won't boot linux, it will run the tests instead. Your
> screen will flicker during the test, it is normal. It will generate
> lcdlog.txt. Mail that file to me or the list, along with any
> information you have about your phone. Especially if you have an
> after-market LCD, or you know what model of LCD you have for another
> reason.
>
> The test works by rapidly switching between LCD mode and GPIO mode on
> the LCD controller pins, to check which pins are tied high, low, or
> are floating. It does this 30 or so times. Any pin that changes value
> is deemed floating. The others are tied high or low (1 or 0). Ignoring
> floating pins (zero them) and you get a code which identifies the
> panel type of the phone.
>
> More about the LCD detection, including device database and log
> processor: https://sourceforge.net/apps/trac/linwizard/wiki/LCDDetect
>
> Thanks
>