From: Ralph <ra...@mu...> - 2007-09-28 23:39:12
|
Hello Ping, in my sourcecode (linuxwacom-0.7.8-3) line 273 is empty: 263: /* Ask the tablet to report tablet data. Repeat until it succeeds */ 264: do { 265: rep_data[0] =3D 2; 266: rep_data[1] =3D 2; 267: usb_set_report(intf, 3, 2, rep_data, 2); 268: usb_get_report(intf, 3, 2, rep_data, 2); 269: } while (rep_data[1] !=3D 2 && limit++ < 5); 270: 271: usb_set_intfdata(intf, wacom); 272: return 0; 273: I checked with CVS version wich seems to be identical. so i changed line 266 instead. ralph@R1F:~$ sudo modprobe wacom Sep 29 00:50:03 R1F kernel: [ 333.680000] input: Unspecified device=20 as /class/input/input8 Sep 29 00:50:03 R1F kernel: [ 333.696000] usbcore: registered new interfac= e=20 driver wacom Sep 29 00:50:03 R1F kernel: [ =20 333.696000] /home/ralph/bin/Sources/linuxwacom/linuxwacom-0.7.8-3/src/2.6.1= 9/wacom_sys.c:=20 v1.46-pc0.1:USB Wacom Graphire and Wacom Intuos tablet driver And there is no 0x0092 device anymore. In /proc/bus/usb/devices T: Bus=3D04 Lev=3D01 Prnt=3D01 Port=3D01 Cnt=3D01 Dev#=3D 2 Spd=3D12 MxC= h=3D 0 D: Ver=3D 1.01 Cls=3D00(>ifc ) Sub=3D00 Prot=3D00 MxPS=3D64 #Cfgs=3D 1 P: Vendor=3D056a ProdID=3D0090 Rev=3D 1.3a S: Manufacturer=3DTablet S: Product=3DISD-V4 C:* #Ifs=3D 1 Cfg#=3D 1 Atr=3De0 MxPwr=3D 0mA I: If#=3D 0 Alt=3D 0 #EPs=3D 1 Cls=3D03(HID ) Sub=3D01 Prot=3D02 Driver= =3Dwacom E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 8 Ivl=3D7ms Was this expected? or did i mess things before? usbmouse.ko used to take over here, so i moved it out of the way... I use Touchpad and Bluetooth mouse. ralph@R1F:~$ ls -l /dev/input/wacom lrwxrwxrwx 1 root root 6 2007-09-29 00:50 /dev/input/wacom -> event8 ralph@R1F:~$ sudo xxd /dev/input/event8 ralph@R1F:~$ sudo wacdump /dev/input/event8 Stay silent. Is there a way to increase verbosity? Like modprobe wacom trace=3D255 or so? Im on holiday from 1. - 5.10. so i may answere delayed, depending on hotspots :-) Yours Ralph. Am Freitag, 28. September 2007 20:18:06 schrieb Ping@LinuxWacom: > Ralph, > Please modify wacom_sys.c line 273 from: > =A0=A0=A0=A0=A0=A0=A0=A0rep_data[1] =3D 2; > to > =A0=A0=A0=A0=A0=A0=A0=A0rep_data[1] =3D 0; > Then compile and install wacom.ko again to see what happens. > Please let me know your result. > Ping |